Factors associated with estrous expression and subsequent fertility in lactating dairy cows using automated activity monitoring

The objective of this observational study was to identify factors associated with estrous duration (DU) and intensity measured as the peak of activity (PA) change and subsequent fertility in lactating Holstein cows using a neck-mounted automated activity monitor (Heatime Pro, SCR Engineers Ltd., Netanya, Israel). Ambient temperature and relative humidity were recorded hourly to calculate the temperature-humidity index (THI). A total of 5,933 estrus events from 3,132 cows located on 8 commercial dairy farms in Germany were used for this study. Farms participated in monthly DHIA testing. Pregnancy diagnosis was performed either by transrectal palpation [farm 1: 42 ± 3 d; farm 3: 40 ± 3 d; farms 4 and 8: 38 ± 3 d; farm 5: 43 ± 3 d after artificial insemination (AI)] or transrectal ultrasonography (farms 2, 6, and 7: 30 ± 3 d after AI). Estrous intensity was categorized based on peak activity of estrus into low (35–89 index value), and high (90–100 index value) PA. Overall, 73.5% of estrus events were of high PA. The mean (± standard error of the mean) DU was 14.94 ± 0.06 h. There was a strong correlation between DU and PA (r = 0.67). In the final statistical model, only PA was associated with pregnancy per artificial insemination (P/AI), with 1.35 greater odds of pregnancy for cows with high PA compared with cows with low PA. Increased THI 1 wk before AI was associated with shorter DU, lower PA, and decreased P/AI. A small percentage of cows (4.7%) showed short interestrus intervals (i.e., more than 1 activity peak within 7 d close to the event of estrus), resulting in reduced DU, PA, and P/AI. The change of weighted rumination was associated with DU and PA, as a lower nadir was associated with a greater risk for high PA and long DU. There was no association, however, between the nadir of change of weighted rumination and P/AI. Whereas milk yield and somatic cell count from the DHIA test date before AI were negatively associated with estrous expression, neither milk yield nor somatic cell count was associated with P/AI. Surprisingly, multiparous cows expressed estrus with longer DU (13.15 ± 0.31 h) compared with primiparous cows (12.52 ± 0.32 h), whereas PA did not differ among parities. Pregnancy per AI was greater for primiparous (29.4%) than for multiparous (22.1%) cows. An estrus event with long DU or high PA was more likely later in lactation. Milk fat, milk protein, milk urea nitrogen, and lactose from the DHIA test date closest to AI had no association with estrous expression or P/AI. In conclusion, DU and PA were highly correlated, and cows with high PA were particularly associated with greater odds for pregnancy. A negative association between estrous expression and P/AI was identified for increased THI 1 wk before AI and cows with short interestrus intervals using automated activity monitor.     

Constraining predictions of the carbon cycle using data

We use a carbon-cycle data assimilation system to estimate the terrestrial biospheric CO(2) flux until 2090. The terrestrial sink increases rapidly and the increase is stronger in the presence of climate change. Using a linearized model, we calculate the uncertainty in the flux owing to uncertainty in model parameters. The uncertainty is large and is dominated by the impact of soil moisture on heterotrophic respiration. We show that this uncertainty can be greatly reduced by constraining the model parameters with two decades of atmospheric measurements.     

Effect of Chemical Glycosylation on the Surface Properties of the Soluble Fraction of Casein

To optimize the use of caseins as surfactants, the surface tension, foaming capacity and stability of the soluble fraction of casein as a function of different factors: pH, protein concentration, polarity (modified by covalent binding of carbohydrates) were studied. Below but near the pHi, the surface properties of the casein (foaming capacity and stability, decrease in surface tension) were improved. The glycosylated caseins which were more flexible and more unfolded diffused and adsorbed more rapidly at the interface and also had increased foaming capacity and stability.     

Composition of interfacial layers in complex food emulsions before and after aeration: effect of egg to milk protein ratio

Whipped emulsions were prepared at pilot scale from fresh milk, whole egg, and other ingredients, for example, sugars and stabilizers (starch, polysaccharides). Egg content was varied: 4 recipes were studied differing in their egg to milk protein ratio (0, 0.25, 0.38, and 0.68). Protein and fat contents were kept constant by adjusting the recipes with skim-milk powder and fresh cream. Emulsions were prepared by high-pressure homogenization and whipped on a pilot plant. Particle-size distribution determined by laser-light scattering showed an extensive aggregation of fat globules in both mix and whipped emulsions, regardless of recipe. Amount of protein adsorbed at the oil-water interface and protein composition of adsorbed layer were determined after isolation of fat globules. Protein load is strongly increased by the presence of egg in formula. Values obtained for the whipped emulsions were dramatically lower than those obtained for the mix by a factor of 2 to 3. Sodium dodecyl sulfate-PAGE indicated a preferential adsorption of egg proteins over milk proteins at the oil-water interface, regardless of recipe. This phenomenon was more marked in aerated than in unaerated emulsions, showing evidence for desorption of some milk proteins during whipping. Egg proteins stabilize mainly the fat globule surface and ensure emulsion stability before whipping. Air bubble size distribution in whipped emulsions was measured after 15 d storage. When the egg to milk protein ratio is decreased to 0.25, large air cells appear in whipped emulsions during storage, indicating mousse destabilization. The present work allows linking the protein composition of adsorbed layers at the fat globule surface to mousse formula and mousse stability.     

Validation of a microbiological method: the STAR protocol, a five-plate test, for the screening of antibiotic residues in milk.

The results of an in-house laboratory validation of a microbiological method for the screening of antibiotic residues in milk are presented. The sensitivity of this five-plate test, called Screening Test for Antibiotic Residues (STAR), was established by the analysis of milk samples spiked with 66 antibiotics at eight different concentrations. Ten different groups of antibiotics were studied: macrolides, aminoglycosides, cephalosporins, penicillins, quinolones, tetracyclines, sulphonamides, lincosamides, phenicolated and miscellaneous drugs. It was shown that 21 antibiotics were detected by the STAR protocol at or below the maximum residue limit (MRL), and that a further 27 drugs could be detected at levels from the MRL up to four times the MRL. The sensitivity of the STAR protocol was at or below the MRL for three macrolides, one tetracycline, two aminoglycosides, some sulphonamides, half of the beta-lactams, quinolones, lincosamides, trimethoprim and baquiloprim. Moreover, the STAR protocol was at least twice as sensitive as conventional methods for macrolides, quinolones and tetracyclines. The other antibiotics had limits of detection between four and 150 times the MRL. Each plate was preferentially sensitive for one or two families of antibacterials: the plate Bacillus cereus for tetracyclines, the plate Escherichia coli for quinolones, the plate Basillus subtilis for aminoglycosides, the plate Kocuria varians for macrolides, and the plate Bacillus stearothermophilus for sulphonamides and beta-lactams. This method has been used routinely on a day-to-day basis to direct the physicochemical confirmation towards one or two families of antibiotics. Considering the high cost of liquid chromatography coupled with tandem mass spectrometry detection analyses, the reduction of the range of antibiotics to test for confirmation is a significant gain in time and money.     

Hydrodynamic hot-electron transport simulation based on the Monte Carlo method

A hydrodynamic hot electron model is used to study electron transport through a submicron N⁺ --- N --- N⁺ GaAs structure. This study is used to investigate improvements which the unique features of this model offer to analysis of devices operating under nonstationary transport conditions. The model is based upon semiclassical “hydrodynamic” conservation equations for the average carrier density, momentum and energy. The general model includes particle relaxation times, momentum relaxation times, energy relaxation times, electron temperature tensors and heat flow vectors as a function of average carrier energy for the Γ, X and L valleys of GaAs. For this study, we utilized a simplified single electron gas version of our model to clearly reveal the impact of the nonstationary terms in the model. Results from both a drift-diffusion model approach and a Monte Carlo analysis are used to show the relative accuracy and facility this new model offers for investigating practical submicron device structures operating under realistic conditions.     

Analysis of the CONRAD computational problems expressing only stochastic uncertainties: neutrons and protons

Within the scope of CONRAD (A Coordinated Action for Radiation Dosimetry) Work Package 4 on Computational Dosimetry jointly collaborated with the other research actions on internal dosimetry, complex mixed radiation fields at workplaces and medical staff dosimetry. Besides these collaborative actions, WP4 promoted an international comparison on eight problems with their associated experimental data. A first set of three problems, the results of which are herewith summarised, dealt only with the expression of the stochastic uncertainties of the results: the analysis of the response function of a proton recoil telescope detector, the study of a Bonner sphere neutron spectrometer and the analysis of the neutron spectrum and dosimetric quantity H(p)(10) in a thermal neutron facility operated by IRSN Cadarache (the SIGMA facility). A second paper will summarise the results of the other five problems which dealt with the full uncertainty budget estimate. A third paper will present the results of a comparison on in vivo measurements of the (241)Am bone-seeker nuclide distributed in the knee. All the detailed papers will be presented in the WP4 Final Workshop Proceedings.     

Interactions between municipal solid waste incinerator bottom ash and bacteria (Pseudomonas aeruginosa)

Municipal solid waste incinerator bottom ash (MSWI BA) can be used in road construction where it can become exposed to microbial attack, as it can be used as a source of oligoelements by bacteria. The extent of microbial colonization of the bottom ash and the intensity of microbial processes can impact the rate of leaching of potentially toxic elements. As a consequence, our objective was to highlight the mutual interactions between MSWI bottom ash and Pseudomonas aeruginosa, a common bacteria found in the environment. Experiments were carried out for 133 days at 25 degrees C using a modified soxhlet's device and a culture medium, in a closed, unstirred system with weekly renewal of the aqueous phase. The solid products of the experiments were studied using a laser confocal microscopy, which showed that biofilms formed on mineral surfaces, possibly protecting them from leaching. Our results show that the total mass loss after 133 days is systematically higher in abiotic medium than in the biotic one in proportions going from 31 to 53% depending on element. Ca and Sr show that rates in biotic medium was approximately 19% slower than in abiotic medium during the first few weeks. However, in the longer term, both rates decreased to reach similar end values after 15 weeks. By taking into account the quantities of each tracer trapped in the layers we calculate an absolute alteration rate of MSWI BA in the biotic medium (531 microg m(-2) d(-1)) and in the abiotic one (756 microg m(-2) d(-1)).     

Radiation and chemical degradation of UVR protection characteristics of fabrics

Clothing can provide substantial protection against solar ultraviolet radiation (UVR) and quantifying the amount of protection can have useful applications to recreational, occupational and medical situations. However, exposure of fabrics to sunlight and sea water can alter their physical and chemical properties, resulting in a change of UVR attenuation characteristics. The objective of the current study was to evaluate the effects of environmental degradation of fabrics on their UVR protection characteristics. The methodologies applied in this study can be used also for the assessment of protective clothing against occupational exposure.     

Assessment of sun protection for children's summer 2005 clothing collection

Overexposure to solar ultraviolet radiation (UVR) in childhoodis considered to be a critical factor for developing skin cancerin later life. Clothing may offer a simple and effective meansof protection against overexposure to the sun, but its use hasoften been underrated in public opinion. The Health ProtectionAgency, in close collaboration with a number of UK retailers,conducted a study to evaluate the UVR protection characteristicsof the summer 2005 collection of children's clothing for outdooractivity. The current paper presents a summary of the assessmentand the effects of stretching and wetting on the UltravioletProtection Factor (UPF) rating of children's clothing. The resultsdemonstrate the need for better public guidance in sun protectionof children and more comprehensive evaluation procedures forsun protection provided by clothing.