The Climate for Creativity and Change in Teams

This article reports the results of a study conducted to examine the ability of the Situational Outlook Questionnaire (SOQ^TM) to effectively discern climates that either encourage or discourage creativity and the ability to initiate change in a team setting. The purpose of the study is to examine the concurrent criterion–related validity of the SOQ. The article explores the characteristics in an organisational climate that promote teamwork and some of the tripwires one needs to be aware of in the formation and management of teams. Nine dimensions of the climate for creativity and change as measured by the Situational Outlook Questionnaire are put forward and defined in relation to teams. The methodology and results of the study are reported. The results show that when subjects (N7equals;154) complete the SOQ based on their recollection of a best– and worst–case team experience, the measure is able to consistently and significantly discriminate between the two types of experiences. Conclusions, implications, and areas for future research to further examine the validity of the SOQ are explored.     

High-power P-i-N diode with the local lifetime control based on theproximity gettering of platinum

We demonstrate for the first time a high-power P-i-N diode with local lifetime control using the proximity gettering of platinum in the FZ silicon. The region of maximal damage resulting from the low-dose helium implantation was decorated by substitutional platinum that diffused from the PtSi anode contact at low temperature (700°C) through the P⁺-P anode doping at the distance of 70 μm. The diodes show very low forward voltage drop with negative temperature coefficient and very low leakage current even at elevated temperatures while keeping the major advantages of the ion irradiated devices like low turn-off losses and soft recovery     

Combined shape and sizing optimization of truss structures

 In this paper, an evolutionary optimization method is presented for weight minimum problem of a 3-dimensional truss structure in terms of nodal coordinates and element cross-sectional areas. The structure is subject to stress, local buckling and displacement constraints. Two types of design variables with different natures are optimized separately: (1) a fully stressed design (FSD) and scaling techniques are applied to sizing variables and (2) the evolutionary node shift method is applied to shape variables. Alternating procedure is utilized to couple the two types of variables and to combine the results. The optimum solution is achieved gradually from the initial configuration design. Two typical truss structures are examined to illustrate the validity of the method. Received: 22 October 2001 / Accepted: 04 June 2002 This research work is supported by the National Natural Science Foundation of China under the guarantees no. 10072050 and 10172072, respectively.     

Deposition mechanisms in langmuir-blodgett films

As part of a study of the possible application of polymerisable Langmuir-Blodgett (LB) films as ultra-fine-line e-beam resists, an investigation of the variation of film structure of 22-tricosenoic acid with differing deposition conditions has been made. Unexpected effects with significant implications for deposition speed and resist sensitivity have been observed, and the new techniques for film characterisation developed during the investigation have resulted in a revised model of deposition explaining the observed independence of the disorder causing optical scattering and the macroscopic features observed by polarised microscopy.     

Refractive index profiling-state of the art

Problems associated with different calibration techniques and some instrumental effects that can determine instrumental accuracy are discussed. It is shown how transmission effects can be observed and used to generate a correction curve for refracted near-field instruments. High-quality fiber slices needed for axial interferometry were used to obtain refractive index differences on suitable fibers to ±1% with the measurements traceable to national standards. Interferometry was used to calibrate a multiple-step fiber which is available in 10-m lengths with a certificate of calibration. The limitations of the technique are discussed, and preliminary results of a study on the effects of residual stress and stress relief on measurements are given. Comparisons are made between measurements made by axial interferometry and refracted near field on a range of fibers. It is shown that commercial profilers can produce reliable measurements of refractive index difference, absolute refractive index, profile shape, and numerical aperture that agree well with measurements by other techniques     

The effect of additives on the thermal stability of poly(vinyl chloride)

The effect of a range of organic additives on the thermal stability of poly(vinyl chloride), both with and without a chloroparaffin extender, was studied using a number of experimental techniques. Of the additives used the best overall balance was provided by pentaerythritol, which increased stability when the extender was present and had no effect when it was absent. The congo red test emerged as the most suitable technique, being consistent and inexpensive and able to screen several additives simultaneously. Isothermal differential thermal analysis correlated with the congo red test but required more expensive equipment, was time-consuming and demanded good mixing of the poly(vinyl chloride) compound to give reproducible results. Thermogravimetry was not sufficiently sensitive and the heat stability test was the least useful of all.     

A comparison of commonly used hydrologic design methods for rainwater collectors

Rainwater collection as a possible water source in developing countries is introduced. The major parameters in calculating the size of the tank are defined. Six methods that have been used previously to relate demand, storage, reliability and the rainfall pattern are compared to the Ottawa Model over a wide range of demands.     

Characterization of GaAs layers grown on polycrystalline GaAs by LPE and current controlled LPE

It is the purpose of this paper to investigate the suitability and effectiveness of growth of thin GaAs layers on polycrystalline GaAs substrates by liquid phase epitaxy (LPE) and current controlled LPE (CCLPE). During each growth run LPE and CCLPE were used to grow thin GaAs layers on two large-grain polycrystalline GaAs substrates cut from the same wafer and simultaneously placed in the same growth system. The grain boundary was exposed by cleaving the samples perpendicular to the grain boundary. Notnarski contrast, SEM, C-V and Hall measurements were performed in order to determine the surface morphology, discontinuity of epilayer at the grain boundary, epilayer thickness unform-ity, resistivity (in directions parallel and perpendicular to the grain boundary), and dopant concentration. The CCLPE system was carefully designed so that growth would take place only by electrotransport in the absence of convection or Peltier cooling. The results indicate that CCLPE yields layers with improved surface morphology and thickness uniformity as compared to those grown by LPE. In some samples the epilayer was discontinuous at certain grain boundaries. Results are presented on CCLPE growth rate dependence upon grain orientation, current density, and continuity of the epilayer at the grain boundary.     

Latest Developments in the Batchwise Application of Hot-dyeing Reactive Dyes to Cellulosic Knitwear

A dyeing profile for a range of reactive dyes suitable for application to cellulosic knitwear is defined. Such a profile shows good level-dyeing, reproducibility and fastness properties together with potential for simplified dyeing processes.