Starch Noodle Quality as Related to Potato Genotypes

Starch noodles were prepared using potato starch from 8 genotypes, mung bean starch, mung bean-potato starch blends, and sweet potato starch. The cooking quality of noodles from selected potato starches compared well with commercial starch noodles. Of the unblended potato starches, Mainechip exhibited cooking quality similar to commercial starch noodles with respect to cooking loss, cooked weight, and ?rmness. Appearance and texture of starch noodles from three genotypes (E55-35, Mainechip, and Shasta) were evaluated by a trained sensory panel. Noodles made from unblended potato starches had higher glossiness and transparency than those from other starches. Noodles from both un-blended and blended Mainechip starch had the highest press and elasticity.     

水热法制备PEMFC用Pt/CNT电催化剂

首次使用水热法制备用于质子交换膜燃料电池(PEMFC)的Pt/CNT。首先使用HNO3-H2O2体系对纳米碳管(CNT)进行预处理并用红外线(IR)光谱进行表征,结果表明,预处理过程打开了CNT端口并去除了大量杂质。在水热法实验中,反应温度和时间是决定铂颗粒大小的重要因素。样品的X射线衍射仪(XRD)和透射电子显微镜法(TEM)分析表明:最优的反应条件是在140℃反应1.5h,此时铂颗粒的平均尺寸小于1.94nm,并且有着狭窄的粒径分布;催化剂中Pt的质量百分含量为40%。该水热法使用常规试剂H2PtCl6·2H2O和HCHO溶液,操作简单,是一个制备Pt/CNT催化剂较好的方法。     

大型汽轮发电机主绝缘耐压和电老化试验中定子线棒端部防晕技术的研究

大型汽轮发电机在主绝缘耐压和电老化试验中,可能出现定子线棒端部闪络和防晕层过热的情况,从而损伤主绝缘,影响试验顺利进行。本文通过建立真机线棒端部的Pspice仿真模型,模拟了线棒端部绝缘表面电场分布,分析了端部闪络的原因。通过进一步的仿真研究,提出了线棒端部防晕的技术方案,并试制了线棒端部防晕装置。试验结果表明,该防晕装置可有效防止线棒端部闪络和防晕层过热。     

表面含有半导电层的高压绝缘结构的电场的有限元分析

表面半导电层结构可以均匀电场和抑制表面电晕放电,因此被广泛应用于高压电力电缆接头和高压发电机定子线圈端部绝缘中。由于表面半导电层比主绝缘层薄得多,在应用有限元法进行分析时存在着分析区域难剖分的缺点。本文经过一个简单的分析实例,提出了表面含有半导电层的高压绝缘结构电场的有限元分析方法。     

系统保压阀在冰箱中的应用

针对某款冰箱通过冷凝器保压技术降低冰箱能耗.验证了不同环温、阀泄漏量、压缩机延迟开启时间对能耗降低程度的影响.另外在化霜前关闭电磁阀,抽取蒸发器中剩余冷媒,降低化霜能耗,优化整机能效.结果证明:1.不同环温下高压侧压力降低的幅度相近,保压阀对能耗的改善量差别不大;2.阀提前开启时间越短对降低能耗越有利;3.阀泄漏量降低...     

孤岛运行方式下微电网储能系统能量成型控制策略

在分析微电网储能系统(ESS)结构的基础上,建立了微电网ESS的端口受控哈密顿(PCH)模型,设计了PCH控制器,确定了期望平衡点,给出了微电网ESS的能量成型控制策略。建立含可再生能源发电单元和ESS的微电网仿真模型对所提策略进行仿真,仿真结果表明,与典型PI闭环线性控制策略相比,所提控制策略在孤岛运行期间能很好地满足对ESS的控制要求,且具有更好的快速性、鲁棒性。     

Roughness coefficient and its uncertainty in gravel-bed river

Manning's roughness coefficient was estimated for a gravel-bed river reach using field measurements of water level and discharge,and the applicability of various methods used for estimation of the roughness coefficient was evaluated.Results show that the roughness coefficient tends to decrease with increasing discharge and water depth,and over a certain range it appears to remain constant.Comparison of roughness coefficients calculated by field measurement data with those estimated by other methods shows that,although the field-measured values provide approximate roughness coefficients for relatively large discharge,there seems to be rather high uncertainty due to the difference in resultant values.For this reason,uncertainty related to the roughness coefficient was analyzed in terms of change in computed variables.On average,a 20%increase of the roughness coefficient causes a 7% increase in the water depth and an 8% decrease in velocity,but there may be about a 15% increase in the water depth and an equivalent decrease in velocity for certain cross-sections in the study reach.Finally,the validity of estimated roughness coefficient based on field measurements was examined.A 10% error in discharge measurement may lead to more than 10% uncertainty in roughness coefficient estimation,but corresponding uncertainty in computed water depth and velocity is reduced to approximately 5%.Conversely,the necessity for roughness coefficient estimation by field measurement is confirmed.     

有限元法与田口方法相结合模拟研究交联聚乙烯电缆绝缘中的水树现象

聚合物中水树的引发与生长不仅与多个内部、外部参数有直接的关系,还与这些参数之间的协同作用有关。在研究水树生长的过程中,采用统计方法是非常必要的,这些统计方法首先要包括可靠的重要变量,还要能够对大量的试验结果进行合理的解释。运用田口方法和有限元法相结合的模拟方法可以在短时间内找到诱发水树的原因,还可以表征水树的危险性并采取适当的方法加以抑制其生长。数值分析及水树培养试验结果显示,水树内部的介电常数及介电常数分布是影响水树诱发的主要原因,而水树本身的几何尺寸的作用则相对次要。