Self-aligned diffusion technique for n-InP JFETs

A self-aligned diffusion process has been demonstrated in the fabrication of n-InP JFETs on semi-insulating InP. This process utilises the anisotropic and selective etching properties of InP/GaInAs materials. Using this technique, sub-micrometre gate lengths can be achieved even with conventional photolithography. Devices with trans-conductance of >35mS/mm, leakage current of < 10nA/mm and gate capacitance of <0.7pF/mm have been fabricated with a cutoff frequency of 7 GHz.     

A simplified dispersion limit formula for IM/DD systems and itscomparison with experimental results

A simplified formula for the dispersion limit of single-mode-fiber intensity modulation/direct detection (IM/DD) systems is derived for arbitrary given normalized pulse width U, eye opening penalty X and source linewidth enhancement factor α. From the comparison with published theoretical analyses, computer simulation and experimental data, its validity and the limits of existing formulae are shown. Using this simple and general formula, one can easily obtain the dispersion limit of various fiber types under different working conditions in IM/DD systems     

从光合作用的倒掉说起

席殊书屋、第三级书局走了,风入松、纸老虎世纪城店关了,我没太在意。2010年10月底,有着36家连锁店的光合作用竟然也宣告倒闭了!我终于淡定不起来了。清华大学出版社零售产品经理王川（简称川）清华大学出版社图书编辑刘青（简称刘）记者Justdo（简称J）新华书店＋网购是必然趋势J：光合作用倒闭了,你们惊讶吗？刘：其实我挺惊讶,因为我常去,特别是五道口那家店,从刚开业起就经常去逛。     

Compressed Sensing Projection and Compound Regularizer Reconstruction for Hyperspectral Images

压缩感知理论提供了一种新的数据获取和压缩思路,能有效地把计算负担从编码端转移到解码端.高光谱数据具备数据稀疏性、空间相关性和谱间相关性,结合这3类先验知识,提出了一种基于复合正则化的高光谱图像压缩感知投影与重构方法.该方法的编码端只需要一个简单的投影操作;在重构算法实现中,基于变量分裂的思想,把具备多个正则项的优化问题转化成多个简单的优化问题,并用迭代方式求解.实验结果表明,本文算法在高光谱图像重构上能获得更高的峰值信噪比和更好的重构效果.该方法具备极低的编码复杂度,适用于资源受限的机载和星载高光谱成像平台.     

Incorporating Actor-Critic in Monte Carlo tree search for symbolic regression

Neural Computing and Applications - Most traditional genetic programming methods that handle symbolic regression are random algorithms without memory and direction. They repeatedly search for the...     

Effect of nitrogen and nickel on the stability of an Fe-12Cr-23Mn austenitic steel

The effect of nitrogen and nickel on the austenite stability and the structural changes as a result of cold work of an Fe-12Cr-23Mn alloy steel has been examined by transmission electron microscopy and X-ray analysis. Prestrain was performed either at room temperature or at 200° C. Final strain was carried out at liquid nitrogen temperature. The volume fraction of strain-induced martensite decreased by 40% and 12% due to the addition of 2.43% Ni and 0.11% N, respectively, despite whether prestrain was performed or not. The mechanisms are discussed in terms of the phase, stacking faults, dislocation cells and dislocation tangles induced by prestrain and final strain.     

低电压氧化锌压敏电阻器的研究

研究了一种制造低电电压氧化锌压敏电阻器的方法。在基本成分的基础上适当加入二氧化钛可降低梯度电压（Ｖ１ｍＡ／ｍｍ），适量掺硼和改进热处理工艺可减小元件的漏电流和提高其稳定性。     

Mold-filling characteristics of AZ91 magnesium alloy in the low-pressure expendable pattern casting process

The magnesium (Mg) alloy low-pressure expendable pattern casting (EPC) process is a newly developed casting technique combining the advantages of both EPC and low-pressure casting. In this article, metal filling and the effect of the flow quantity of inert gas on the filling rate in the low-pressure EPC process are investigated. The results showed that the molten Mg alloy filled the mold cavity with a convex front laminar flow and the metal-filling rate increased significantly with increasing flow quantity when flow quantity was below a critical value. However, once the flow quantity exceeded a critical value, the filling rate increased slightly. The influence of the flow quantity of inert gas on melt-filling rate reveals that the mold fill is controlled by flow quantity for a lower filling rate, and, subsequently, controlled by the evaporation of polystyrene and the evaporation products for higher metal velocity. Meanwhile, the experimental results showed that the melt-filling rate significantly affected the flow profile, and the filling procedure for the Mg alloy in the low-pressure EPC process. A slower melt-filling rate could lead to misrun defects, whereas a higher filling rate results in folds, blisters, and porosity. The optimized filling rate with Mg alloy casting is 140 to 170 mm/s in low-pressure EPC.     

不同活化剂对石油焦基活性炭孔结构的影响

以石油焦为原料 ,Na OH,KOH和 Na2 CO3 为活化剂制备活性炭 ,采用氮气吸附考察了不同活化剂对活性炭的比表面积、中孔和微孔孔径分布、孔容积及平均孔径等孔结构的影响 .结果表明 :KOH活化制备的活性炭包含 1 nm的微孔和 4nm的中孔 ,总孔容 0 .648cm3 /g,比表面积大 ;Na OH制备的活性炭以 1 nm的微孔为主 ,占总孔容 ( 0 .1 65 cm3 /g)的 98% ,平均孔径 1 .83nm;Na2 CO3 制备的活性炭以 4nm的中孔为主 ,占总孔容 ( 0 .1 43cm3 /g)的 68.5 % ,平均孔径 3.42 nm,比表面积小 .3种样品的孔径都呈现出多峰分布特征 .KOH和 Na2 CO3 活化制备的活性炭的 N2 吸附脱附曲线属于 型 ,Na OH活化制备的活性炭吸附脱附曲线属于 型 .