Molten salts/ceramic-foam matrix composites by melt infiltration method as energy storage material

A new type of high temperature energy storage material was obtained through the melt infiltration method, using compounding SiC ceramic foam as matrix and Na₂SO₄ as phase change material. The resulting composite material was measured by XRD, SEM, TG-DSC methods. The experimental results indicate that the composite is composed of silicon carbide, sodium sulfate and square quartz, and no chemical reactions occurs between Na₂SO₄ and SiC matrix. Na₂SO₄ has a good bonding with the SiC ceramic foam matrix. As the composite material is characterized by high thermal energy storage density and high thermal conductivity, it is suit for energy storage under high temperature. Funded by the “863” Hi-Tech Research and Development Program of China (2008AA05Z418)     

透过节能减排政策和制度看中国节能减排

随着世界人口的增长、现代工业的高速发展,不可再生资源遭到掠夺式开采、能源消耗几何级增长、环境污染程度大大超出了生态系统的承受能力。如何解决能源短缺与污染严重对经济和社会发展的影响已经成为世界性的难题,我国同样如此。因此,加强对节能减排体系的研究,对我国节能减排工作的开展具有非常重要的意义。对我国节能减排的政策和制度进行剖析,指出了我国节能减排政策、制度以及做法中存在的问题,并提出解决的方法。     

3种花卉在山区及平原越夏的效果评价

通过对金宝剑（Vrieseamarjolcin）、安祖花（Anthuriumandraeanum）和一品红（Euphorbiapulcherrima）3种花卉在萧山区海拔500m山区越夏与海拔9m平原越夏的比较试验,结果显示：山区越夏后,金宝剑的叶片数、叶片长度、叶宽、株高和冠径分别比平原越夏后增长了6．9％,28．6％,7．1％,7．5％和9．7％,叶色较深,生长好又快;安祖花的植株高,花蕾多,叶片深绿、有光泽,其平均株高和单株花蕾数分别比平原越夏后高3．2cm和多0．8个;一品红的平均株高55．8cm,每株最大苞片平均7．8cm,且完全转红,达到市场销售的要求,而平原越夏后则出现下部叶片掉落的现象（平均株高57．1cm,每株最大苞片平均7．2cm）,不完全转红,不能形成成品,达不到市场销售的要求。表明这三种花卉在山区越夏的生长情况都要好于平原越夏。     

汽车涂料使用的颜料（Ⅰ）

汽车涂料是一种高质量涂饰剂，其制造必须要使用一些具有多方面优良性能的高级颜料。本文对汽车涂料使用的各色颜料的选择作以推荐。     

配电终端的嵌入式程序更新系统设计

针对配电网中配电终端数量多、分布广以及经常需要维护更新的问题,为提高现场程序更新的工作效率,设计实现了一种配电终端嵌入式程序更新的系统.本系统以配电终端Flash的扇区大小为单位进行读写,既减少了程序对Flash的操作次数,也避免了 一帧数据跨扇区存储的问题,使得整个程序更新过程有效减少了对Flash的读写操作,节省了时间.本文介绍了具体实现策略,并已在部门产品中得到了应用和验证.     

Finite Time Synchronization of Delayed Quaternion Valued Neural Networks with Fractional Order

Neural Processing Letters - In this article, the finite time (FT) synchronization problem of fractional order quaternion valued neural networks with time delay is investigated. Without separating...     

A Performance Evaluation of Classic Convolutional Neural Networks for 2D and 3D Palmprint and Palm Vein Recognition

Palmprint recognition and palm vein recognition are two emerging biometrics technologies. In the past two decades, many traditional methods have been proposed for palmprint recognition and palm vein recognition, and have achieved impressive results. However, the research on deep learning-based palmprint recognition and palm vein recognition is still very preliminary. In this paper, in order to investigate the problem of deep learning based 2D and 3D palmprint recognition and palm vein recognition in-depth, we conduct performance evaluation of seventeen representative and classic convolutional neural networks (CNNs) on one 3D palmprint database, five 2D palmprint databases and two palm vein databases. A lot of experiments have been carried out in the conditions of different network structures, different learning rates, and different numbers of network layers. We have also conducted experiments on both separate data mode and mixed data mode. Experimental results show that these classic CNNs can achieve promising recognition results, and the recognition performance of recently proposed CNNs is better. Particularly, among classic CNNs, one of the recently proposed classic CNNs, i.e., EfficientNet achieves the best recognition accuracy. However, the recognition performance of classic CNNs is still slightly worse than that of some traditional recognition methods.

     

Reaction mechanism and microstructure evolution of reaction sintered <Emphasis Type="Italic">h</Emphasis>-BN

Hexagonal boron nitride ceramic (h-BN) based on the nitridation of B powders was obtained by reaction sintering method. The effects of sintering temperature on the mechanical properties and microstructure of the resultant products were investigated and the reaction mechanism was discussed. Results showed that the reaction between B and N₂ occurred vigorously at temperatures ranging from 1 000 °C to 1 300 °C, which resulted in the generation of t-BN. When the temperature exceeded 1 450 °C, transformation from t-BN to h-BN began to occur. As the sintering temperature increased, the spherical particles of t-BN gradually transformed into fine sheet particles of h-BN. These particles subsequently displayed a compact arrangement to achieve a more uniform microstructure, thereby increasing the strength.     

多视无人机影像环形拼接算法

由于多视无人机影像拼接时误差的传播和累计经常导致拼接图扭曲偏斜或者拼接的失败.针对这个问题提出了构建拼接环并以多级拼接作为辅助的拼接策略.首先将待拼接图像分为多组,每组中以环形方式进行拼接,然后利用SIFT进行匹配,RANSAC实现误匹配的去除,而后计算透视变换关系,最后通过平差方程将误差削弱.通过实拍无人机影像进行的拼接实验表明该方式可以有效减少累计误差的影响,提高拼接精度.该方法的提出可以作为影像拼接消除累计误差的有效方式之一.     

Dynamic data packing towards the optimization of QoC and QoS in networked control systems

A class of networked control systems is investigated whose communication network is shared with other applications. The design objective for such a system setting is not only the optimization of the control performance but also the efficient utilization of the communication resources. We observe that at a large time scale the data packet delay in the communication network is roughly varying piecewise constant, which is typically true for data networks like the Internet. Based on this observation, a dynamic data packing scheme is proposed within the recently developed packet-based control framework for networked control systems. As expected this proposed approach achieves a fine balance between the control performance and the communication utilization: the similar control performance can be obtained at dramatically reduced cost of the communication resources. Simulations illustrate the effectiveness of the proposed approach.