Investigation of structural,optical, electrical,and magnetic properties of Fe-doped La0.7Sr0.3MnO3 manganites

In this work, the physical properties of nanocrystalline samples of La_0.7Sr_0.3Mn_1−xFe_xO₃ (0.0 ≤ x ≤ 0.20) perovskite manganites synthesized by the reverse micelle (RM) technique were explored in detail. The phase purity, crystal structure, and crystallite size of the samples were determined using X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. All the samples had rhombohedral crystal structure and crystallite size increased with increase in Fe content in La_0.7Sr_0.3MnO₃. The scanning electron micrographs (SEMs) exhibited smooth surface morphology and nonuniform shape of the particles. The optical properties studied using UV-visible absorption spectroscopy revealed a decrease in the absorbance and optical band gap with an increase in Fe content in La_0.7Sr_0.3MnO₃ compound. The temperature-dependent resistivity measurements revealed semiconducting nature of x = 0 and 0.1 samples up to the studied temperature range, while a metal-to-insulator transition was observed at higher Fe doping. Magnetic studies revealed weak ferromagnetism in all the samples and a reduction in the maximum magnetization with an increase in Fe content. A close correlation between electrical transport and magnetic properties was observed with the doping of Fe ion in La_0.7Sr_0.3MnO₃ at Mn site. These results advocate strong interactions associated with the double exchange mechanism among Fe³⁺ and Mn³⁺ ions.     

Kinetic study of crude oil-to-chemicals via steam-enhanced catalytic cracking in a fixed-bed reactor

This study presents new experimental results on the direct conversion of crude oil to chemicals via steam-enhanced catalytic cracking. We have organized the experimental results with a kinetics model using crude oil and steam co-feed in a fixed-bed flow reactor at reaction temperatures of 625, 650, and 675°C over the Ce-Fe/ZSM-5 catalyst. The model let us find optimum conditions for crude oil conversion, and the order of the steam cracking reaction was 2.0 for heavy oil fractions and 1.0 for light oil fractions. The estimated activation energies for the steam cracking reactions ranged between 20 and 200 kJ/mol. Interestingly, the results from kinetic modelling helped in identifying a maximum yield of light olefins at an optimized residence time in the reactor at each temperature level. An equal propylene and ethylene yield was observed between 650 and 670°C, indicating a transition from dominating catalytic cracking at a lower temperature to a dominating thermal cracking at a higher temperature. The results illustrate that steam-enhanced catalytic cracking can be utilized to effectively convert crude oil into basic chemicals (52.1% C2-C4 light olefins and naphtha) at a moderate severity (650°C) as compared to the conventional high-temperature steam cracking process.     

Modification of sandy soil using water‐borne polymer

A new polymeric system has been applied for structural modification of (noncompactable) sandy soils. The system is based on a water‐borne styrene acrylic polymeric formulation (emulsion) containing varying amounts of solid polymer. The present work deals with system optimization and measurements designed to examine the effects of polymer content on hydraulic conductivity and compressive strength. Samples were prepared from prescribed amounts of polymer, water, and sand by using two different preparations methods (mixing and spraying). Measurements of hydraulic conductivity for both sets of samples were conducted in a flexible membrane test apparatus. For the first set of samples, the permeability coefficient of the sand was noted to be reduced 10‐fold (from 10^?5 to 10^?6 m s^?1) upon the incorporation of about 2% polymer. In the second set (samples prepared with the spraying method), the hydraulic conductivity was further reduced to 7.2 × 10^?7 at a polymer concentration of about 2%. Stress–strain measurements made on dry cylindrical specimens disclosed remarkable enhancement in the mechanical behavior of the system. For both types of preparation methods, the compressive strength and modulus of elasticity increased linearly with the polymer concentration in the sample. Scanning electron microscopic examination revealed that the dramatic reduction in the permeability and the improved mechanical properties are attributed to the polymer coverage of the sand particles and the development of interconnecting ties between them. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2484–2491, 2003     

Synthesis,Characterization and Surface Properties of Amidosulfobetaine Surfactants Bearing Odd-Number Hydrophobic Tail

Three amidosulfobetaine surfactants were synthesized namely: 3-(N-pentadecanamidopropyl-N,N-dimethyl ammonium) propanesulfonate (2a); 3-(N-heptadecanamidopropyl-N,N-dimethyl ammonium) propanesulfonate (2b), and 3-(N-nonadecanamidopropyl-N,N-dimethyl ammonium) propanesulfonate (2c). These surfactants were prepared by direct amidation of commercially available fatty acids with 3-(dimethylamino)-1-propylamine and subsequent reaction with 1,3-propanesultone to obtain quaternary ammonium salts. The synthesized surfactants were characterized by IR, NMR and mass spectrometry. Thermogravimetric analysis (TGA) results showed that the synthesized surfactants have excellent thermal stability with no major thermal degradation below 300 °C. The critical micelle concentration (CMC) values of the surfactants 2a and 2b were found to be 2.2 × 10^?4 and 1.04 × 10^?4 mol/L, and the corresponding surface tension (γ_CMC) values were 33.14 and 34.89 mN m^?1, respectively. The surfactants exhibit excellent surface properties, which are comparable with conventional surfactants. The intrinsic viscosity of surfactant (2b) was studied at various temperatures and concentrations of multi-component brine solution. The plot of natural logarithm of relative viscosity versus surfactant concentration obtained from Higiro et al. model best fit the surfactant behavior. Due to good salt resistance, excellent surface properties and thermal stability, the synthesized surfactant has potential to be used in various oil field applications such as enhanced oil recovery, fracturing, acid diversion, and well stimulation.     

Carbon Nanotubes (CNTs) Nanocomposite Hydrogels Developed for Various Applications: A Critical Review

Interest in the development of polymeric hydrogels impregnated with carbon-nanotubes (CNTs) is growing rapidly in recent times owing to their usefulness in many fields of human endeavor. This review paper serves as an archive of literature reports of several researchers who have worked on polymeric hydrogels embedded with CNTs for diverse applications. The review covers up to date research advancement on the synthesis and characterization properties of CNTs nanocomposite hydrogels. Besides, this review discusses extensively the various fields in which polymeric hydrogels infused with CNTs have been applied. This unprecedented compilation of CNTs nanocomposite hydrogels information into a single revision allows a straightforward comparison of studies performed for diverse applications.     

TRANSPORT PROPERTIES OF CELLULAR FOOD MATERIALS UNDERGOING FREEZE-DRYING

The samples of sliced and mashed apples were freeze-dried by controlling their surface temperatures over the usual pressure range of commercial operations. The surface of sliced samples could not be maintained at above 10°C in order to prevent the frozen layer from melting, while that of mashed samples was allowed to heat up to 70°C.

Thermal conductivities and permeabilities were determined by applying the uniformly-retreating-ice front model to the dried layer of the samples undergoing freeze-drying. The values of permeability for the mashed samples were found to depend on the ice-crystallization time during freezing. The results indicated that the drying rate of sliced samples was limited by the transfer rate of water vapor flowing through the dried layer. A cellular structural model is proposed for predicting the permeability of the dried layer, based on the resistance of the cell membrane to molecular transfer of water vapor.     

Mild functionalization of carbon nanotubes filled epoxy composites: Effect on electromagnetic interferences shielding effectiveness

The effect of nitric acid mild functionalized multiwalled carbon nanotubes (MWCNTs) on electromagnetic interference (EMI) shielding effectiveness (SE) of epoxy composites was examined. MWCNTs were oxidized by concentrated nitric acid under reflux conditions, with different reaction times. The dispersion of MWCNTs after functionalization was improved due to the presence of oxygen functional groups on the nanotubes surface. Functionalization at 2 h exhibits the highest EMI SE and electrical conductivity of MWCNTs filled epoxy composites. However, EMI shielding performance of MWCNTs filled epoxy composite declined when the functionalization reaction time was prolonged. This was due to extensive damage on the MWCNT structure, as verified by a Raman spectroscope. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42557.     

Feasibility of recycled newspaper as cellulose source for regenerated cellulose membrane fabrication

An environmental friendly regenerated cellulose membrane (RCM) was successfully prepared via NaOH/urea aqueous solution system by utilizing recycled newspaper (RNP) as the cellulose source. The morphological and chemical structure of resulting membrane were characterized using scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, X‐ray diffraction (XRD) spectroscopy, and thermogravimetric analysis (TGA). Results from FTIR and XRD verified that the transparent RCM possesses cellulose II structure. SEM observation revealed that the transparent RCM consist of homogeneous dense symmetric membrane structure and composed of a skin layer with mean roughness parameter R_a, obtained from AFM analysis of 29.53 nm. Pure water flux, water content, water contact angle, porosity, and pore size of the resulting membrane were also measured. This study promotes the potential of the cellulose‐based membrane obtained from low cost cellulose source for application in filtration and separation system. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42684.