In vivo biocompatibility of two PEG/PAA interpenetrating polymer networks as corneal inlays following deep stromal pocket implantation

This study compared the effects of implanting two interpenetrating polymer networks (IPNs) into rabbit corneas. The first (Implant 1) was based on PEG-diacrylate, the second (Implant 2) was based on PEG-diacrylamide. There were inserted into deep stromal pockets created using a manual surgical technique for either 3 or 6 months. The implanted corneas were compared with normal and sham-operated corneas through slit lamp observation, anterior segment optical coherence tomography, in vivo confocal scanning and histological examination. Corneas with Implant 1 (based on PEG-diacrylate) developed diffuse haze, ulcers and opacities within 3 months, while corneas with Implant 2 (based on PEG-diacrylamide) remained clear at 6 months. They also exhibited normal numbers of epithelial cell layers, without any immune cell infiltration, inflammation, oedema or neovascularisation at post-operative 6 month. Morphological studies showed transient epithelial layer thinning over the hydrogel inserted area and elevated keratocyte activity at 3 months; however, the epithelium thickness and keratocyte morphology were improved at 6 months. Implant 2 exhibited superior in vivo biocompatibility and higher optical clarity than Implant 1. PEG-diacrylamide-based IPN hydrogel is therefore a potential candidate for corneal inlays to correct refractive error.     

Identifying the mechanism of biosensing with carbon nanotube transistors

Carbon nanotube transistors have outstanding potential for electronic detection of biomolecules in solution. The physical mechanism underlying sensing however remains controversial, which hampers full exploitation of these promising nanosensors. Previously suggested mechanisms are electrostatic gating, changes in gate coupling, carrier mobility changes, and Schottky barrier effects. We argue that each mechanism has its characteristic effect on the liquid gate potential dependence of the device conductance. By studying both the electron and hole conduction, the sensing mechanisms can be unambiguously identified. From extensive protein-adsorption experiments on such devices, we find that electrostatic gating and Schottky barrier effects are the two relevant mechanisms, with electrostatic gating being most reproducible. If the contact region is passivated, sensing is shown to be dominated by electrostatic gating, which demonstrates that the sensitive part of a nanotube transistor is not limited to the contact region, as previously suggested. Such a layout provides a reliable platform for biosensing with nanotubes.     

Influence of TiO2 incorporation in HfO2 and Al2O3 based capacitor dielectrics

Atomic layer deposition was applied to fabricate metal oxide films on planar substrates and also in deep trenches with appreciable step coverage. Atomic layer deposition of Ru electrodes was realized on planar substrates. Electrical and structural behaviour of HfO₂-TiO₂ and Al₂O₃-TiO₂ nanolaminates and mixtures as well as Al₂O₃ films were evaluated. The lowest leakage current densities with the lowest equivalent oxide thickness were achieved in mixed Al₂O₃-TiO₂ films annealed at 700 °C, compared to all other films in as-deposited state as well as annealed at 900 °C. The highest permittivities in this study were measured on HfO₂-TiO₂ nanolaminates.     

Properties of tantalum oxide thin films grown by atomic layer deposition

Thin tantalum oxide films were deposited using atomic layer deposition from TaCl₅ and H₂O at temperatures in the range 80–500 °C. The films deposited at temperatures below 300 °C were predominantly amorphous, whereas those grown at higher temperatures were polycrystalline containing the phases TaO₂ and Ta₂O₅. The oxygen to tantalum mass concentration ratio corresponded to that of TaO₂ at all growth temperatures. The optical band gap was close to 4.2 eV for amorphous films and ranged from 3.9 to 4.5 eV for polycrystalline films. The refractive index measured at λ = 550 nm increased from 1.97 to 2.20 with an increase in growth temperature from 80 to 300 °C. The films deposited at 80 °C showed low absorption with absorption coefficients of less than 100 cm⁻¹ in the visible region.     

Immune-Modulating Mucin Hydrogel Microdroplets for the Encapsulation of Cell and Microtissue

Immune-modulating biomaterials used to encapsulate cells and microtissue transplants can be engineered to dampen the immune reaction and increase treatment efficacy. Mucin-derived materials have gained attention for their ability to modulate macrophage and dendritic cell activity, and to trigger mild foreign body response when implanted in vivo. In this study, the potential of mucin hydrogels (Muc-gels) as cell-encapsulating materials is investigated. When placed in contact with blood, Muc-gels trigger significantly lower complement activation, compared to clinical grade alginate hydrogels. Muc-gel is a size-selective barrier strongly hindering the diffusion of molecules with a hydrodynamic radius larger than 6 nm such as immunoglobulins. Muc-gels support the growth of MIN6m9 insulin-secreting cells into islet-like organoids and the survival of primary human pancreatic islets, which maintained glucose responsiveness. Muc-gels can be shaped into microdroplets in which MIN6m9 cells or cell aggregates can be encapsulated without loss of viability. Microdroplet encapsulation will allow transplants to be easily injected and improve their survival by favoring mass transport through the capsule. The combination of strong immune modulatory properties, appropriate selective barrier profile, biocompatibility for embedded cells Muc-gels of particular value for microencapsulating cells or microtissues for transplantation.     

Fluid flow past an aperture in a microfluidic channel

Electroosmotically driven flow in neurotransmitter-based retinal prostheses offers a novel approach to interfacing the nervous system. Here, we show that electroosmotically driven flow in a microfluidic channel can be used either to eject or to withdraw fluid through a small aperture in the channel wall. We study this fluid movement numerically using a finite-element method and experimentally using microfabricated channels and apertures. Two devices are used to test the concept of fluid ejection and withdrawal: (1) a single, large channel with four apertures and (2) a prototype neural interface with four individually addressable apertures. We compared experimental and numerical results in microchannels using the observed pH dependence of the fluorescent dye fluorescein, finding good agreement between the results. Because of the simplicity and rapid response of electroosmotic flow, this technique may be useful for neurotransmitter-based neural interfaces.     

Test of ‘scaling laws’ describing the concentration dependence of osmotic pressure,diffusion and sedimentation in semidilute macromolecular solutions

Data of osmotic pressure, diffusion and sedimentation in semidilute macromolecular solutions are systematized with regard to scaling laws. The observed main features are: (a) the concentration dependence of the osmotic pressure both at good and theta solvent conditions is in excellent agreement with that predicted by the scaling laws. (b) The concentration dependence of the mutual diffusion coefficient D_m could not uniquely be described by a simple scaling law. A difference in concentration dependence between D_m and the cooperative diffusion coefficient was observed for polystyrene under good solvent conditions. (c) The concentration dependence of the permeability coefficient (related to sedimentation) and the sedimentation coefficient were for most of the systems in close agreement with that predicted by the scaling laws.