Surface chemistry of SnO2 nanowires on Ag-catalyst-covered Si substrate studied using XPS and TDS methods

In this paper we investigate the surface chemistry, including surface contaminations, of SnO₂ nanowires deposited on Ag-covered Si substrate by vapor phase deposition (VPD), thanks to x-ray photoelectron spectroscopy (XPS) in combination with thermal desorption spectroscopy (TDS). Air-exposed SnO₂ nanowires are slightly non-stoichiometric, and a huge amount of C contaminations is observed at their surface. After the thermal physical desorption (TPD) process, SnO₂ nanowires become almost stoichiometric without any surface C contaminations. This is probably related to the fact that C contaminations, as well as residual gases from air, are weakly bounded to the crystalline SnO₂ nanowires and can be easily removed from their surface. The obtained results gave us insight on the interpretation of the aging effect of SnO₂ nanowires that is of great importance for their potential application in the development of novel chemical nanosensor devices.     

Active Targeting Using HER‐2‐Affibody‐Conjugated Nanoparticles Enabled Sensitive and Specific Imaging of Orthotopic HER‐2 Positive Ovarian Tumors

Despite advances in cancer diagnosis and treatment, ovarian cancer remains one of the most fatal cancer types. The development of targeted nanoparticle imaging probes and therapeutics offers promising approaches for early detection and effective treatment of ovarian cancer. In this study, HER‐2 targeted magnetic iron oxide nanoparticles (IONPs) are developed by conjugating a high affinity and small size HER‐2 affibody that is labeled with a unique near infrared dye (NIR‐830) to the nanoparticles. Using a clinically relevant orthotopic human ovarian tumor xenograft model, it is shown that HER‐2 targeted IONPs are selectively delivered into both primary and disseminated ovarian tumors, enabling non‐invasive optical and MR imaging of the tumors as small as 1 mm in the peritoneal cavity. It is determined that HER‐2 targeted delivery of the IONPs is essential for specific and sensitive imaging of the HER‐2 positive tumor since we are unable to detect the imaging signal in the tumors following systemic delivery of non‐targeted IONPs into the mice bearing HER‐2 positive SKOV3 tumors. Furthermore, imaging signals and the IONPs are not detected in HER‐2 low expressing OVCAR3 tumors after systemic delivery of HER‐2 targeted‐IONPs. Since HER‐2 is expressed in a high percentage of ovarian cancers, the HER‐2 targeted dual imaging modality IONPs have potential for the development of novel targeted imaging and therapeutic nanoparticles for ovarian cancer detection, targeted drug delivery, and image‐guided therapy and surgery.     

Hybrid DPWM implementation using coarse and fine programmable ADLL

In the paper we propose a novel architecture and implementation of 11-bit Digital Pulse Width Modulator (DPWM) circuit based on previously known building blocks. Linearized Class-AD Double-sided (LADD) algorithm has been used to calculate the DPWM signals of the 11-bit resolution hybrid DPWM for a Class-AD digital audio amplifier. Noise-shaping process is used to support high fidelity with practical values of time resolution. The proposed DPWM circuit is composed of 8-bit counter and Analog Delay Locked Loop (ADLL) using 4-bit tapped delay line. A dual ADLL employing coarse and fine programmable delay element is used to adjust the delay time of delay line and lock it to required time. The coarse- as well as fine-delay lines are implemented as a cascade of variable-delay elements based on shunt capacitor delay element or single-ended Schmitt trigger. The proposed 11-bit DPWM circuit, at a switching frequency of 352.8 kHz and clock generator frequency of 90.3 MHz allows us to attain SNR of 120 dB and THD of the output signal less than 0.1% within the audio baseband and modulation index M=0.95. Basic verification of circuit manufacturability and simulation results (Monte Carlo analysis) for real CMOS process are presented.     

Retention of oxalates in frozen products of three brassica species depending on the methods of freezing and preparation for consumption

The investigation showed that fresh brassicas: Brussels sprouts, broccoli, green cauliflower and white cauliflower respectively contained 50 mg, 67 mg, 72 mg and 95 mg oxalates in 100 g fresh matter. Soluble oxalates constituted 70%, 40%, 40% and 54% of total oxalates respectively. The cooked product obtained from traditionally prepared frozen vegetables (blanching-freezing-refrigerated storage-cooking) contained 45-66% of soluble oxalates. The product obtained from frozen vegetables produced using the modified method (cooking-freezing-refrigerated storage-defrosting and heating in a microwave oven) contained more oxalates than that obtained using the traditional method. The oxalate: calcium ratio in fresh vegetables varied considerably: 0.63 (Brussels sprouts); 1.10 (broccoli); 1.27 (green cauliflower); and 2.42 (white cauliflower). In products prepared for consumption the ratios were lower. The proportion of calcium bound as calcium oxalate differed between the vegetables investigated, but the treatments applied did not influence this parameter. The apparent retention of oxalate overestimated the true retention.     

Stochasticity and time delays in gene expression and evolutionary game theory

We discuss effects of stochasticity and time delays in simple models of population dynamics. In social-type models, where individuals react to the information concerning the state of the population at some earlier time, sufficiently large time delays may cause oscillations. In biological-type models, where some changes already take place in the population at an earlier time, oscillations might not be present for any time delay. We illustrate this idea in models of delayed random walks, gene expression, and population dynamics of evolutionary game theory.     

Nitrosamines and water

This paper provides an overview of all current issues that are connected to the presence of nitrosamines in water technology. N-nitrosodimethylamine (NDMA) is the most frequently detected member of this family. Nitrosamines became the hottest topic in drinking water science when they were identified as disinfection by-products (DBPs) in chloraminated waters. The danger that they pose to consumer health seems to be much higher than that from chlorinated DBPs. This review summarizes our contemporary knowledge of these compounds in water, their occurrence, and precursors of nitrosamines in drinking and wastewaters, in addition to attempts to remove nitrosamines from water. The paper also reviews our knowledge of the mechanisms of nitrosamine formation in water technology. The current, commonly accepted mechanism of NDMA formation during chloramination of drinking waters assumes that dichloramine reacts with dimethylamine, forms unsymmetrical dimethylhydrazine and further oxidizes to NDMA. The question to answer is which precursors are responsible for delivering the DMA moiety for the reaction since the presence of DMA in water cannot explain the quantities of NDMA that are formed. There are also reports that other oxidants that are commonly used in water technology may generate NDMA. However, the mechanisms of such transformations are unknown. Methods for the removal of nitrosamines from water are described briefly. However, the research that has been undertaken on such methods seems to be at an early stage of development. It is predicted that photolytic methods may have the greatest potential for technological application.     

Boron and aluminum diffusion into 4H-SiC substrates

Boron and aluminum doping by diffusion into n-type 4H-SiC Si-face substrates was carried out at the temperatures of 1800-2000 °C. Secondary ion mass spectroscopy (SIMS) was employed to obtain the impurity profiles, which showed that linearly graded boron profile and shallow aluminum profiles have been achieved, which may be a promising application in SiC device fabrication, such as p-n diode or ohmic contact. Characterization of high temperature processing influence on SiC surface morphology has been performed. Elemental boron and aluminum carbide were determined to be the best candidates as an impurity source materials for realizing p-type diffusion.     

Dielectric and viscoelastic studies of curing epoxy-amine model systems

Summary The curing of different epoxy-amine model systems which present only gelification and/or vitrification processes has been followed with the evolution of their viscoelastic and electrical behaviours during the network formation. Some attempts are performed to correlate the significant evolution of the mechanical and electrical parameters with the physico-chemical changes of these well defined chemical systems during their hardening and complete curing.