Iridium complexes incorporating coumarin moiety as catalyst photoinitiators: Towards household green LED bulb and halogen lamp irradiation

Household LED bulbs and halogen lamps are used to promote the ring-opening photopolymerization of epoxides in the presence of a new series of iridium(III) complexes (IrCs) exhibiting enhanced visible light absorption properties through the introduction of a coumarin moiety. These latter complexes are used as catalyst photoinitiators in an oxidative cycle in combination with a silane and an iodonium salt. Remarkably, even under the selected very soft irradiations (e.g. light intensity lower than 2 mW/cm²), excellent polymerization profiles are obtained (conversions > 80%). The mechanisms are investigated by ESR and luminescence experiments.     

Specific cationic photoinitiators for near UV and visible LEDs: Iodonium versus ferrocenium structures

Two iodonium salts based on a coumarin chromophore are investigated for polymerization upon light emitting diode irradiations (LEDs). They work as one‐component photoinitiators. They initiate the cationic polymerization of epoxides (under air) and vinylethers (laminate) upon exposure to violet LEDs (385 and 405 nm). Excellent polymerization profiles are recorded. Their efficiency is quite similar to that of a ferrocenium salt. Interpenetrating polymer networks can also be obtained through a concomitant cationic/radical photopolymerization of an epoxy/acrylate blend monomer. The light absorption properties of these new salts as well as the involved photochemical mechanisms are investigated for the first time through electron spin resonance, laser flash photolysis, steady state photolysis experiments. Molecular orbital calculations are also used to shed some light on the initiation mechanisms. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42759.     

Chemometric Characterization of Eight Monovarietal Algerian Virgin Olive Oils

Differences in triacylglycerol, fatty acid, squalene, and tocopherol compositions were demonstrated between 8 varieties of virgin olive oils (Aberkane, Aguenaou, Aharoun, Aimel, Bouchouk Guergour, Bouichret, Chemlal, and Sigoise) from Petite Kabylie area, north eastern Algeria. Fatty acid and triacylglycerol morphotypes characterized each variety. A principal component analysis, based on triacylglycerol, fatty acid, and squalene compositions, differentiates between varieties. Minor fatty acids and squalene, usually not taken into account individually in authentication studies, are strongly involved in this differentiation, whereas the discriminant power of tocopherols is weak. Soft Independent Modeling of Class Analogy classification using chemical compositions as variables showed a high potential to authenticate the varietal origin of Algerian virgin olive oils.     

A STUDY OF SILICONE OIL-IN-WATER EMULSIONS

Emulsions of silicone oil-in water were formed using a Brinkmann Polytron homogenizer with Igepal CO-530 as an emulsifier. Silicone viscosities ranged from 10 to 33,000 mPa.s at 25°C. Rheological characteristics and particle size analyses of silicone oil-in-water emulsions were studied. At high volume fraction of the dispersed phase (70%-75%), silicone oil-in-water emulsions were stable. At lower volume fractions (50%-60%), emulsions formed were less stable and the two phases easily separated in a few days. The emulsions formed with high volume fraction silicone oil show highly non-Newtonian behavior (shear thinning). Emulsions made with low viscosity oils had lower viscosities than those made from high viscosity oils. Relative viscosity-concentration data could be correlated by the Frankel and Acrivos Equation. Increasing the emulsifier concentration of 70% oil-in-water emulsions resulted in a decrease in mean droplet size and an increase in emulsion viscosity. Increasing the intensity of agitation also resulted in higher viscosity and smaller droplet size until a critical energy input above which droplet size increased. Emulsification with low shear mixing provides more control in decreasing mean droplet size with time.     

Design and Synthesis of Galactosylated Bifurcated Ligands with Nanomolar Affinity for Lectin LecA from Pseudomonas aeruginosa

Lectin A (LecA) from Pseudomonas aeruginosa is an established virulence factor. Glycoclusters that target LecA and are able to compete with human glycoconjugates present on epithelial cells are promising candidates to treat P. aeruginosa infection. A family of 32 glycodendrimers of generation 0 and 1 based on a bifurcated bis‐galactoside motif have been designed to interact with LecA. The influences both of the central multivalent core and of the aglycon of these glycodendrimers on their affinity toward LecA have been evaluated by use of a microarray technique, both qualitatively for rapid screening of the binding properties and also quantitatively (K_d). This has led to high‐affinity LecA ligands with K_d values in the low nanomolar range (K_d=22 nm for the best one).     

Mastering the structure of PLA foams made with extrusion assisted by supercritical CO2

In this study, the outcome of operating conditions of extrusion assisted by supercritical CO₂ for the manufacture of poly(lactic acid) foams was investigated. It was found that the temperature before and inside the die was the most prominent parameter to tune the foam properties. Foam porosity as high as 96% could be obtained (for die temperature between 109 and 112 °C), representing a total expansion exceeding 30. In this temperature range, low crystallinity (≈6%) was induced giving foams with high radial expansion i.e., large diameters and open porosity. At 112 °C, the CO₂ was able to greatly expand the foams, providing 73% of its potential blowing effect. On the other hand, a low die temperature (below a die temperature of 107 °C) induces a significantly higher level of crystallinity resulting in foams with closed‐porosity and a large longitudinal expansion due to higher strength of the polymer melt. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45067.     

Malachite green derivatives for two-photon RNA detection

The design, preparation and characterisation of a library of malachite green (MG) derivatives for two-photon RNA labelling is described. Some of these MG derivatives exhibit an increased affinity for an MG-aptamer, as well as improved two-photon sensitivity when compared to the classical malachite green chloride. The underlying mechanisms and potential benefits for in vivo RNA visualisation are discussed.     

Effects of Speeds,Materials, and Tool Rake Angles on Metallic Particle Emission During Orthogonal Cutting

Dry high speed machining has been proposed as a viable and cost-effective process in metal cutting industries. However, it produces fine and ultra-fine metallic particles, also referred to as dust, which can be harmful to the machine-tool operator. The risk associated with exposure to metallic particles increases as the particle size decreases. For machining processes, little data exist on the size and distribution of dust generated during the shaping of materials. In order to reduce or eliminate the generation of these particles, it is necessary to understand how and under which conditions they are formed, as well as to be able to make predictions. In this study, the effects exerted by tool geometry, material, and machining parameters on dust emission were studied experimentally in order to understand the mechanisms of dust generation and to develop a predictive model. The particle sizes studied include the PM2.5 (particles with aerodynamique diameter below 2.5 μm) and a distribution of nanoparticles varying in size from 10 nm to 10 μm. Using dry machining and reducing the amount of dust generated should improve the air quality in machine shops in addition to helping protect the environment.