Mathematical framework for higher order breakage scenarios

Droplet breakage has been widely studied due to its relevance to the gas purification industry. This phenomenon appears inside scrubbers on the mesh pad, due to the interaction of the droplets with the liquid drainage film or the walls of the equipment. The breakage process that has been most widely studied in the previous publications is binary breakup, mostly due to its simplicity and because it is the most common one in diluted systems.In this work, higher order breakups like ternary, quaternary, etc. have been considered. A higher order breakage model was developed based on an existing binary breakage model, and it was shown that this approach is suitable for higher order breakage computations. Despite the fact that this procedure is reasonably accurate for the first preliminary results, a more accurate mathematical model based on a detailed physical analysis of the problem in question should be developed.     

Associations between the Complement System and Choroidal Neovascularization in Wet Age-Related Macular Degeneration

Age-related macular degeneration (AMD) is the leading cause of blindness affecting the elderly in the Western world. The most severe form of AMD, wet AMD (wAMD), is characterized by choroidal neovascularization (CNV) and acute vision loss. The current treatment for these patients comprises monthly intravitreal injections of anti-vascular endothelial growth factor (VEGF) antibodies, but this treatment is expensive, uncomfortable for the patient, and only effective in some individuals. AMD is a complex disease that has strong associations with the complement system. All three initiating complement pathways may be relevant in CNV formation, but most evidence indicates a major role for the alternative pathway (AP) and for the terminal complement complex, as well as certain complement peptides generated upon complement activation. Since the complement system is associated with AMD and CNV, a complement inhibitor may be a therapeutic option for patients with wAMD. The aim of this review is to (i) reflect on the possible complement targets in the context of wAMD pathology, (ii) investigate the results of prior clinical trials with complement inhibitors for wAMD patients, and (iii) outline important considerations when developing a future strategy for the treatment of wAMD.     

Traceability of electrolytic conductivity measurements to the International System of Units in the sub mS m region and review of models of electrolytic conductivity cells

The present paper focuses on the currently available reliability of the results of electrolytic conductivity measurements in the low conductivity range, emphasizing its weaknesses with respect to SI traceability. Electrochemical and physical effects at the electrode-solution interface influencing the measured impedance spectra are outlined, giving an overview of models that can be employed to investigate the frequency response of electrolytic conductivity cells to an applied AC voltage. Particular attention is devoted to the determination of the bulk resistance of the solution, which is necessary to derive the electrolytic conductivity of aqueous solutions traceable to the SI in the sub mS m⁻¹ range.     

Determination of Breakage Parameters in Turbulent Fluid‐Fluid Breakage

Numerous sets of single‐particle breakage experiments are required in order to provide a sufficient database for improving the modeling of fluid particle breakage mechanisms. This work focuses on the interpretation of the physical breakage events captured on video. In order to extract the necessary information required for modeling the mechanisms of the fluid particle breakage events in turbulent flows, a well‐defined image analysis procedure is necessary. Two breakage event definitions are considered, namely, initial breakup and cascade breakup. The reported breakage time, the number of daughter particles created, and the daughter size distribution are significantly affected by the definition used. For each breakage event definition, an image analysis procedure is presented.     

A numerical study of pellet model consistency with respect to molar and mass average velocities,pressure gradients and porosity models for methanol synthesis process: Effects of flux models on reactor performance

The objective of this work is to compare mass- and mole based diffusion flux models, convection, fluid velocity and pore structure models for methanol synthesis process. Steady-state models have been derived and solved using least-squares spectral method (LSM) to describe the evolution of species composition, pressure, velocity, total concentration and diffusion fluxes in porous pellets for methanol synthesis. Mass diffusion fluxes are described according to the rigorous Maxwell Stefan model, dusty gas model and the more simple Wilke model. These fluxes are defined with respect to molar- and mass averaged velocities. The different effects of choosing the random- and parallel pore models have been investigated. The effects of Knudsen diffusion have been investigated. The result varies significantly in the dusty gas model. The effectiveness factors have been calculated for the methanol synthesis process for both mass- and mole based pellet models. The values of effectiveness factors for both mass- and mole based pellet models do not vary so much. The effect of Wilke-, Maxwell–Stefan- and dusty gas mass diffusion fluxes on the reactor performance have been studied. Steady-state heterogeneous fixed bed reactor model is derived where the intra-particle mass diffusion fluxes in the voids of the pellet are described by Wilke-, Maxwell–Stefan- and dusty gas models. Furthermore, the total computational efficiency of the heterogeneous fixed bed reactor model is calculated with several closures for the intra-particle mass diffusion fluxes. The model evaluations revealed that:

-

The mass- and mole based pellet models are not completely consistent. However, the small deviation (less than 2%) between mass- and mole based pellet models is due to the model equations are not fully consistent. If one pellet model is to be chosen for the methanol synthesis process, the optimal diffusion flux model is the Maxwell–Stefan model.     

Effects of dietary supplementation of rapeseed oil on metabolism of [1-<Superscript>14</Superscript>C]18∶1n−9, [1-<Superscript>14</Superscript>C]20∶3n−6, and [1-<Superscript>14</Superscript>C]20∶4n−3 in atlantic salmon heaptocytes

Atlantic salmon were fed fish meal-based diets supplemented with either 100% fish oil (FO) or 100% rapeseed oil (RO) from an initial weight of 85 g to a final average weight of 280 g. The effects of these diets on the capacity of Atlantic salmon hepatocytes to elogate, desaturate, and esterify [1-¹⁴C]18∶1n−9 and the immediate substrates for the Δ⁵ desaturase, [1-¹⁴C]20∶3 n−6 and [1-¹⁴C]20∶4n−3, were investigated. Radiolabeled 18∶1n−9 was mainly esterified into cellular TAG, whereas the more polyunsaturated FA, [1-¹⁴C]20∶3n−6 and [1-¹⁴C]20∶4n−3, were primarily esterified into cellular PL. More of the elongation product, [1-¹⁴C]20∶1n−9, was produced from 18∶1n−9 and more of the desaturation and elongation products, 22∶5n−6 and 22∶6n−3, were produced from [1-¹⁴C]20∶3n−6 and [1-¹⁴C]20∶4n−3, respectively, in RO hepatocytes than in FO hepatocytes. Further, we studied whether increased addition of [1-¹⁴C]18∶1n−9 to the hepatocyte culture media would affect the capacity of hepatocytes to oxidize 18∶1n−9 to acid-soluble products and CO₂. An increase in exogenous concentration of 18∶1n−9 from 7 to 100 μM resulted in a nearly twofold increase in the amount of 18∶1n−9 that was oxidized. The conversion of 20∶4n−3 and 20∶3n−6 to the longer-chain 22∶6n−3 and 22∶5n−6 was enhanced by RO feeding in Atlantic salmon hepatocytes. The increased capacity of RO hepatocytes to produce 22∶6n−3 was, however, not enought to achieve the levels found in FO hepatocytes. Our data further showed that there were no differences in the hepatocyte FA oxidation capacity and the lipid deposition of carcass and liver between the two groups.     

Evaluation of retail fresh meat packagings covered with stretch films of plasticized PVC and non‐PVC alternatives

The characteristics and performance of several non‐PVC stretch films were compared to those of plasticized PVC. Initially the main polymer components of the film were identified by infrared spectrometry and differential scanning calorimetry. The differences between films in mechanical properties, such as puncture resistance and tensile strength, varied about a factor of two, while the differences in elongation at break were considerably higher. Plasticized PVC showed properties somewhere in the middle. The water vapour transmission was highest for PVC, while its permeability to oxygen was the lowest. The potential for overall migration was assessed by substitute testing, using 95% ethanol and isooctane as test media, and the migration from PVC was found to be the highest. However, after use of the appropriate reduction factor of four, as allowed for fresh meat, the PVC film also proved to conform to legislation. The potential for specific migration was investigated by solvent extraction followed by gas chromatography. Twenty‐four components were identified, of which 11 could be compared to relevant migration limits based on evaluations of the EU Scientific Committee for Food. The release of solvents was estimated by direct thermal desorption at 100°C. Four films of different composition were used in a storage experiment with fresh beef. The meat quality was followed by measurements of colour, microbiological quality (total colony forming units and lactic acid bacteria) and lipid oxidation (thiobarbituric acid reactive substances) through a prolonged shelf‐life test. No differences in meat quality during normal shelf‐life were seen as a function of the film used. Copyright © 2004 John Wiley & Sons, Ltd.     

Investigation of (Cr,Co)7C3-fcc-graphite equilibrium in the temperature interval 1373 to 1473 K

In the current study, the phase equilibria between fcc, graphite and M₇C₃ (M = Cr,Co) have been studied at 1373 °K, 1423 °K, and 1473 °K. The solubility of Co in the M₇C₃ phase and the solubility of Cr and C in the fcc phase have been determined by the high-temperature equilibration and quenching technique. Appropriate mixtures of Cr₇C₃ + Co or M₇C₃ + Co + C were equilibrated and subsequently quenched in liquid nitrogen. The quenched samples were characterized by X-ray diffraction and by metallographic examination. The studies were carried out on the samples to determine the homogeneity of the sample as well as the phases and their composition. From the results, the compositional regions of the three-phase triangle M₇C₃ + fcc + graphite could be accurately determined. The results show that the Co solubility in the Cr₇C₃ in the experimental temperature interval is higher than previous investigations performed at higher temperatures.