Macromolecular stabilizers for polymers

Inherent chemical activity, physical persistence and good compatibility are factors determining the efficiency of a stabilizer observed during the degradation of amorphous and crystalline synthetic polymers. Synthesis of macromolecular stabilizers is one of the ways used to solve the problem of physical persistency of stabilizers under severe aggressive environmental attacks on polymers. General types of macromolecular stabilizers, routes to their synthesis and characteristic examples of macromolecular antioxidants, UV absorbers, hindered amine light stabilizers, flame retarders and biostabilizers, as well as of polyfunctional systems are given. Problems connected with the use of macromolecular stabilizers are mentioned.     

Methods to determine solubility parameters of polymers using inverse gas chromatography

Experimental values of the Flory–Huggins parameter, χ, between polymers and solvents, are frequently used to determine the solubility parameters of the polymers. A method using nonlinear curve fitting of RTχ/V was compared to the linear regression method commonly used. It was found that the formulas for the solubility parameter were the same, but the linear method produced a slightly different entropy term. The nonlinear method gave a lower correlation coefficient and wider confidence intervals and was more effective at distinguishing systems than the linear model. The effect of the deviation of probes in the solubility parameter model is discussed. Using probes with low solubility parameters to measure the polymer solubility parameter gave wider confidence intervals. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2894–2902, 2004     

Rheological properties of hyperbranched polymer/poly(ethylene terephthalate) reactive blends

The rheological properties in solution, in shear and in uniaxial elongation of poly(ethylene terephthalate) (PET) reacted together with hyperbranched polymers (HBPs) were investigated. Two different PET grades, of low and high molecular weights, were compounded with sub‐ to over‐stoichiometric concentrations of HBPs of second and fourth pseudo‐generation, and subsequently subjected to a solid‐state polycondensation (SSP). The formation of microgels, which occurs at high HBP concentration, gave rise to a large increase in melt elasticity and a related decrease in melt strength. At low HBP concentrations, the complex viscosity of the unreacted HBP/PET was considerably reduced, thus demonstrating a lubrication effect of the HBP molecules. During SSP, the intrinsic and shear viscosities exhibited a gradual increase, which was similar for both PET and HBP/PET blends, and was correlated to an increase in molecular weight, through linear‐chain extension and branching reactions. The elongational viscosity of the reactive blends was also increased as a function of reaction time, and this increase was much larger in the case of the HBP/PET blends. A 400% increase in melt strength of the PET was obtained by combining SSP and trace amounts of an HBP of second generation, without any decrease in drawability.     

On the effect of treating poly(acrylic acid) with argon and tetrafluoromethane plasmas: Kinetics and degradation mechanism

Poly(acrylic acid) (PAAc) films were treated with either an argon or a tetrafluoromethane (CF₄) plasma and subsequently analyzed with X-ray photoelectron spectroscopy (XPS). PAAc films were decarboxylated during both types of plasma treatments. In addition, during the CF₄ plasma treatment, the PAAc films became fluorinated. The plasma phase during the argon plasma treatment of PAAc films was investigated with optical emission spectroscopy. It was shown that during this plasma treatment carbon dioxide, water, and possibly hydrogen were liberated from the PAAc surface. By covering the surface of PAAc films with different materials (lithium fluoride, UV fused silica, and glass) during the plasma treatment, it was possible to differentiate between photochemically induced and particle-induced changes of the surface. This method was used to show that decarboxylation during the argon plasma treatment was caused by vacuum UV radiation (wavelength < 150 nm) and the decarboxylation/fluorination during the CF₄ plasma treatment was induced by reactive fluorine-containing species from the plasma phase. Furthermore, during both processes, etching of the PAAc surface occurred. Based on these mechanisms, kinetic models were derived that could be used to describe the measured kinetic data adequately. © 1994 John Wiley & Sons, Inc.     

Analytical Determination of the Distribution of Polishing Time over the Surface of Polished Tiles

Several kinds of glossiness pattern can be seen on the surface of porcelain stoneware tiles right after the polishing process, as a function of the kinematics performed by the polishing heads. For the newest generation of industrial polishing trains, where a transverse oscillation is included, there is still a great need for literature about the resulting patterns. This paper intends to find the spatial distribution of time under polishing analytically using the kinematics equations involved in the polishing process. The measured values of glossiness collected from three polished tiles are also presented. The importance of adopting a good kinematics for the polishing process has been highlighted, and the equations developed herein are useful tools for further attempts at optimizing the polishing process.     

Fiber Coating Concepts for Brittle-Matrix Composites

The current interest in tough, high-temperature materials has motivated fiber coating development for brittle-matrix composites with brittle reinforcements. Such coatings are needed for controlled interface debonding and frictional sliding. The system investigated in this study was sapphire fiber-reinforced alumina. This system is thermochemically stable for severe use conditions, exhibits little thermal expansion mismatch, and utilizes the excellent strength and creep resistance of sapphire reinforcements. Porous oxide and refractory metal coatings which satisfy requirements for toughness improvement in these composites were identified by employing a variety of newly developed mechanical testing techniques for determining the interfacial fracture energies and sliding resistances.     

Impacts of new technologies on media usage and social behaviour in domestic environments

Technological infrastructure at home is changing continuously and is becoming increasingly interconnected. Media devices, including the TV set, provide access to the Internet and offer manifold opportunities to consume media on demand. Additionally, personal devices, such as smartphones, also enable flexible consumption and sharing of media. Questions about how these technologies change the user's media usage and how these changes affect the social structure of a household, however, remain largely unanswered. In order to gain insight into the adoption of new technologies into daily routines, we explored these changes in respect of people's media usage in a qualitative long-term Living Lab study. We will present findings regarding personal routines, flexible integration of new devices into existing practices, influences on households as social systems and related issues in device access and collective use. We will highlight potentials and conflicts regarding device shifts and roles; restrictions in device access; social influences in the living room; and individual changes in media consumption.     

Scalable Realistic Rendering with Many‐Light Methods

Recent years have seen increasing attention and significant progress in many‐light rendering, a class of methods for efficient computation of global illumination. The many‐light formulation offers a unified mathematical framework for the problem reducing the full lighting transport simulation to the calculation of the direct illumination from many virtual light sources. These methods are unrivaled in their scalability: they are able to produce plausible images in a fraction of a second but also converge to the full solution over time. In this state‐of‐the‐art report, we give an easy‐to‐follow, introductory tutorial of the many‐light theory; provide a comprehensive, unified survey of the topic with a comparison of the main algorithms; discuss limitations regarding materials and light transport phenomena and present a vision to motivate and guide future research. We will cover both the fundamental concepts as well as improvements, extensions and applications of many‐light rendering.     

Nucleating activity of the quinacridone and phthalocyanine pigments in polypropylene crystallization

The nucleating ability of two organic pigments, quinacridone and phthalocyanine, in nonisothermal polypropylene (PP) crystallization was investigated. The investigations were carried out using DSC and polarizing microscopy. The efficiency of pigments in the nucleation process was determined in a simple test comparing the crystallization temperature of the PP‐containing pigments with respect to the pure polymer. Both pigments revealed good nucleating activity. In the presence of pigments the increment of the crystallization temperature and the increase of nucleation rate were observed. The nucleating efficiency of pigments was confirmed in investigations of the obtained structure. The nucleating activity of pigments was explained by their features fulfilling several requirements for good nucleating agents. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3957–3964, 2003