High‐efficiency red‐phosphorescent organic light‐emitting diode with the organic structure of 2‐TNATA/Bebq2:SFC‐411/SFC‐137

Abstract— High‐efficiency and simple‐structured red‐emitting phosphorescent devices based on the hole‐injection layer of 4,4′,4″‐tris(2‐naphthylphenyl‐phenylamino)‐triphenylamine [2‐TNATA] and the emissive layer of bis(10‐hydroxybenzo[h] quinolinato)beryllium complex [Bebq²] doped with SFC‐411 (proprietary red phosphorescent dye) have been researched. The fabricated devices are divided into three types depending on whether or not the hole‐transport layer of N,N′‐bis(1 ‐naphthyl)‐N, N'‐diphenyl‐1,1′‐biphenyl‐4,4′‐diamine [NPB] or the electron‐transport layer of SFC‐137 (proprietary electron transporting material) is included. Among the experimental devices, the best electroluminescent characteristics were obtained for the device with an emission structure of 2‐TNATA/Bebq²:SFC‐411/SFC‐137. In this device, current density and luminance were found to be 200 mA/cm² and 15,000 cd/m² at an applied voltage of 7 V, respectively. Current efficiencies were 15 and 11.6 cd/A under a luminance of 500 and 5000 cd/m². The peak wavelength in the electroluminescent spectral distribution and color coordinates on the Commission Internationale de I'Eclairage (CIE) chart were 628 nm and (0.67, 0.33), respectively.     

Modified BVD model of PZT actuator using high-voltage square pulse method for micropumps

The field of micro–electro–mechanical systems and microfabrication has produced micro-total-analysis systems, which are widely used in medicine, diagnostics, and biological and chemical research. For the development of high precision drug delivery systems, micropumps with a lead zirconate titanate (PZT) actuator, which has a fast response time and high resolution, are most likely to be applied in implementations. To improve the performance of PZT micropumps utilized in the microfluidics field, suitable models are required to enable the optimization of the PZT actuator driving circuits. This study proposes a modified Butterworth–Van Dyke (BVD) model which consists of a BVD model in series with an electrical resistance that describes a PZT actuator driven by a square pulse with a relatively high voltage and low frequency for micropump applications. Experiments were conducted to assess parameters of the model at various voltages; they indicate that the electrical resistance is essential for modeling the PZT actuator of the micropump. The electrical model was verified using a SPICE simulation, whose numerical results were compared with the experimental data for the current response of the PZT actuator. The results show a close correlation between the simulation of the electrical model and the measurements of the PZT actuator under real operating conditions.     

Psychiatric document retrieval using a discourse-aware model

With the increased incidence of depression-related disorders, many psychiatric websites have been developed to provide huge amounts of educational documents along with rich self-help information. Psychiatric document retrieval aims to assist individuals to locate documents relevant to their depressive problems efficiently and effectively. By referring to relevant documents, individuals can understand how to alleviate their depression-related symptoms according to recommendations from health professionals. This work proposes the use of high-level discourse information extracted from queries and documents to improve the precision of retrieval results. The discourse information adopted herein includes negative life events, depressive symptoms and semantic relations between symptoms, which are beneficial for better understanding of users' queries. Experimental results show that the discourse-aware retrieval model achieves higher precision than the word-based retrieval models, namely the vector space model (VSM) and Okapi model, adopting word-level information alone.     

Tilt detection and servo control method for the holographic data storage system

Recently photopolymer with disk type substrate is selected as a media of the holographic data storage system. Because shape of the media is a disk, a disk tilt must be occur when the media rotates. When disk tilt occurs the angle between the reference beam and the media is changed by the tilt, thus the data can not be recorded with a right angle or another data page is retrieved. The holographic data storage system is very weak to the tilt disturbance by the Bragg effect, therefore it is necessary to detect the disk tilt angle and compensate it. In this study, we measure the amount of the tilt error using external photo detector and compensate it by rotating the angle of galvano mirror with our own algorithm.     

Identification of tool and product effects in a mixed product and parallel tool environment

In the semiconductor manufacturing industry, production resembles an automated assembly line in which many similar products with slightly different specifications are manufactured step-by-step, with each step being a complicated physiochemical batch process performed by a number of tools. This constitutes a high-mix production system for which effective run-to-run control (RtR) and fault detection control (FDC) can be carried out only if the states of different tools and different products can be estimated. However, since in each production run, a specific product is performed on a specific tool, absolute individual states of products and tools are not observable. In this work, a novel state estimation method based on analysis of variance (ANOVA) is developed to estimate the relative states of each product and tool to the grand average performance of this station in the fab. The method is formulated in the form of a recursive state estimation using the Kalman filter. The advantages of this method are demonstrated using simulations to show that the correct relative states can be estimated in production scenarios such as tool-shift, tool-drift, product ramp-up, tool/product-offline and preventive maintenance (PM). Furthermore, application of this state estimation method in RtR control scheme shows that substantial improvements in process capabilities can be gained, especially for products with small lot counts. The proposed algorithm is also evaluated by an industrial application.     

Studies on a LaF3‐coated MgO protecting layer in AC‐plasma‐display panels

A new protecting layer, a LaF₃‐coated MgO layer, in color AC‐plasma‐display panels (PDPs) was studied in order to overcome the weakness of the conventional single MgO protecting layer. The material characteristics of the new layer were examined by using variations in the deposition process. The display characteristics were also examined by implementing their processes to actual PDPs. It was demonstrated that this method is effective in lowering the firing and sustaining voltages of PDPs and enhancing the brightness of the panel as well.     

A 2‐in. a‐Si:H TFT‐LCD with embedded backlight control TFT sensors with various channel widths

Abstract— A 2.0‐in. a‐Si:H TFT‐LCD with embedded TFT sensors for the control of the backlight intensity according to the ambient light intensity has been developed. Two types of a‐Si:H TFT sensors with various channel widths were embedded into a TFT backplane with bottom‐ and top‐gate structures for measuring the ambient light and backlight illumination, respectively. The output signal, measured by a readout IC, increased with backlight intensity until 20,000 lux.     

Biomechanical evaluation of nursing tasks in a hospital setting

A field study was conducted to investigate spinal kinematics and loading in the nursing profession using objective and subjective measurements of selected nursing tasks observed in a hospital setting. Spinal loading was estimated using trunk motion dynamics measured by the lumbar motion monitor (LMM) and lower back compressive and shear forces were estimated using the three-dimensional (3D) Static Strength Prediction Program. Subjective measures included the rate of perceived physical effort and the perceived risk of low back pain. A multiple logistic regression model, reported in the literature for predicting low back injury based on defined risk groups, was tested. The study results concluded that the major risk factors for low back injury in nurses were the weight of patients handled, trunk moment, and trunk axial rotation. The activities that required long time exposure to awkward postures were perceived by nurses as a high physical effort. This study also concluded that self-reported perceived exertion could be used as a tool to identify nursing activities with a high risk of low-back injury.     

A connection rule for alpha-carbon coarse-grained elastic network models using chemical bond information

A sparser but more efficient connection rule (called a bond-cutoff method) for a simplified alpha-carbon coarse-grained elastic network model is presented. One of conventional connection rules for elastic network models is the distance-cutoff method, where virtual springs connect an alpha-carbon with all neighbor alpha-carbons within predefined distance-cutoff value. However, though the maximum interaction distance between alpha-carbons is reported as 7 angstroms, this cutoff value can make the elastic network unstable in many cases of protein structures. Thus, a larger cutoff value (>11 angstroms) is often used to establish a stable elastic network model in previous researches. To overcome this problem, a connection rule for backbone model is proposed, which satisfies the minimum condition to stabilize an elastic network. Based on the backbone connections, each type of chemical interactions is considered and added to the elastic network model: disulfide bonds, hydrogen bonds, and salt-bridges. In addition, the van der Waals forces between alpha-carbons are modeled by using the distance-cutoff method. With the proposed connection rule, one can make an elastic network model with less than 7 angstroms distance cutoff, which can reveal protein flexibility more sharply. Moreover, the normal modes from the new elastic network model can reflect conformational changes of a given protein better than ones by the distance-cutoff method. This method can save the computational cost when calculating normal modes of a given protein structure, because it can reduce the total number of connections. As a validation, six example proteins are tested. Computational times and the overlap values between the conformational change and infinitesimal motion calculated by normal mode analysis are presented. Those animations are also available at UMass Morph Server (http://biomechanics.ecs.umass.edu/umms.html).     

Fast transmission CT for determining attenuation maps using a collimated line source, rotatable air-copper-lead attenuators and fan-beam collimation

We describe a technique using a line source and a rotatable air-copper-lead assembly to acquire gamma transmission computed tomographic (TCT) data for determining attenuation maps to compensate SPECT emission scans. The technique minimizes problems associated with discriminating 99mTc transmission and 201Tl emission photons and requires only a modest increase in total study time. A 99mTc line source and a stacked foil ("multislat") collimator are placed near the focal line of a fan-beam collimator (114 cm focal length) mounted on one detector of a triple-camera SPECT system. We acquired TCT data of plastic rod and anthropomorphic thorax phantoms to investigate the capability of the line source and rotatable air-copper-lead attenuators to determine attenuation maps. The data were acquired with and without 5.4 MBq (145 microCi) of 201Tl placed in the myocardial chamber of the thorax phantom. Phantoms also were scanned using a curved transmission slab source mounted to a parallel-hole collimator. Fan-beam TCT images have improved resolution compared with parallel-beam TCT images. Two patient scans also were performed to evaluate the clinical usefulness of fan-beam TCT. The rotatable air-copper-lead attenuator method eliminates contamination of emission data by transmission photons and reduces spill-over of emission data into the transmission energy window for some cases. Results show the feasibility of using fast, sequential or interlaced transmission scans of a line source within a rotatable air-copper-lead attenuator assembly to obtain accurate attenuation maps for SPECT attenuation compensation.