Analytical study of the additives system in polyethylene

On the basis of standards of identification of substances in the additive system of polyethylene has been performed. Different methods for separation such as adsorption thin-layer chromatography, high-performance liquid chromatography with chemically bounded phases, and gas chromatography have been used. The fir al identification has been made with mass spectrometry. The substances have been extracted from polyethylene with hexane and chloroform.     

Laminated alumina/zirconia ceramic composites prepared by electrophoretic deposition

The electrophoretic deposition of alumina and zirconia powders from isopropanolic suspension in the presence of monochloroacetic acid was studied in the constant-current regime. The different levels of electric current during deposition from 250 μA to 48 mA were used. The green density of the deposit depends on the current density and then on the particle velocity during deposition, reaching values from 58% to 61% according to the electric current used. It was found that the lower the green density of the green deposit, the larger the pores. The low green density led to low final fired density and subsequently to the low Vickers hardness HV5 ranging from 2000 to 1650 depending on electric current used. Based on these findings microlaminates having various thickness ratios to achieve different residual stress levels were prepared consisting of alternating layers of alumina and zirconia.     

The Chemistry and Biology of 6‐Hydroxyceramide,the Youngest Member of the Human Sphingolipid Family

Sphingolipids are crucial for the life of the cell. In land‐dwelling mammals, they are equally important outside the cell—in the extracellular space of the skin barrier—because they prevent loss of water. Although a large body of research has elucidated many of the functions of sphingolipids, their extensive structural diversity remains intriguing. A new class of sphingolipids based on 6‐hydroxylated sphingosine has recently been identified in human skin. Abnormal levels of these 6‐hydroxylated ceramides have repeatedly been observed in atopic dermatitis; however, neither the biosynthesis nor the roles of these unique ceramide subclasses have been established in the human body. In this Minireview, we summarize the current knowledge of 6‐hydroxyceramides, including their discovery, structure, stereochemistry, occurrence in healthy and diseased human epidermis, and synthetic approaches to 6‐hydroxysphingosine and related ceramides.     

Spatial and temporal variation of turbulence characteristics in combined sewer flow

Flow unsteadiness is a typical feature of both combined and storm sewer flow. The following study therefore deals with both theoretical and experimental investigations of the steady uniform and transient turbulent open-channel flows in a circular conduit with smooth walls as well as over rough sediment deposits. The aim of the study is to define the relationship between flow unsteadiness and selected flow/turbulence characteristics estimated in a circular tube running partially full using the ultrasonic velocity profiler (UVP) method. The temporal/spatial turbulence intensities and the Reynolds stress distribution were identified in the mid-vertical of the pipe. Generally, the absolute values of turbulent characteristics are larger in the rising branch of the hydrograph than in the descending one for the same flow depths. This difference in absolute values is related to the flow equilibrium parameter. Furthermore, the influence of the sediment bed on selected flow/turbulence variables was studied. The results show a strong impact of cross-section geometry on local values of friction velocity, i.e. bottom shear stress, along the wetted perimeter of the channel cross-section. Interestingly, their relative values decreased along with an increase in flow depth.     

Study of structure and properties of ZnO–Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

Glasses of the ternary system ZnO–Bi₂O₃–P₂O₅ were prepared and studied in two compositional series 50ZnO–xBi₂O₃–(50 − x)P₂O₅ and (50 − y)ZnO–yBi₂O₃–50P₂O₅. Two distinct glass-forming regions were found in the 50ZnO–xBi₂O₃–(50 − x)P₂O₅ glass series with x = 0–10 and 20–35 mol.% Bi₂O₃. All prepared Bi₂O₃-containing glasses reveal a high chemical durability. Small additions of Bi₂O₃ (∼5 mol.%) improve thermal stability of glasses. All glasses crystallize on heating within the temperature range of 505–583 °C. Structural studies by Raman and ³¹P MAS NMR spectroscopies showed the rapid depolymerisation of phosphate chains within the first region with x = 0–15 and the presence of isolated Q⁰ phosphate units within the second region with x = 20–35. Raman studies showed that bismuth is incorporated in the glass structure in BiO₆ units and their vibrational bands were observed within the spectral region of 350–700 cm⁻¹. The evolution of properties and the spectroscopic data are both in accordance with a network former effect of Bi₂O₃.     

Microchip sonic spray ionization

The first microchip version of sonic spray ionization (SSI) as an atmospheric pressure ionization source for mass spectrometry (MS) is presented. The microchip used for SSI has recently been developed in our laboratory, and it has been used before as an atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI) source. Now the ionization is achieved simply by applying high (sonic) speed nebulizer gas, without heat, corona discharge, or high voltage. The microchip SSI was applied to the analysis of tetra-N-butylammonium, verapamil, testosterone, angiotensin I, and ibuprofen. The limits of detection were in the range of 15 nM to 4 microM. The technique was found to be highly dependent on the position of the chip toward the mass spectrometer inlet, and on the gas and the sample solution flow rates. The microchip SSI provided dynamic linearity following a pattern similar to that used with electrospray, good quantitative repeatability (RSD=16%), and long-term signal stability.     

Mechanochemical synthesis of ternary chalcogenide chalcostibite CuSbS2 and its characterization

Journal of Materials Science: Materials in Electronics - In this work, the very rapid one-step mechanochemical synthesis of nanocrystalline ternary chalcogenide chalcostibite CuSbS2 prepared from...     

Cross-property connections for copper–graphite composites

Copper–graphite composite materials in the range of 0–10 vol% of carbon phase were prepared from the mixture of copper and graphite powders by hot isostatic pressing. The microstructure, mechanical (tensile strength, elongation to fracture) and physical (electrical and thermal conductivity) properties of composite samples were investigated, and the cross-property connections were calculated. It was shown that electrical and thermal conductivity cross-property (Lorenz number) is almost constant and increases only slightly (no more than 10 % increase was observed). This implies that in the investigated composition range the Lorenz number of a copper–graphite composite system behaves according to Franz–Wiedemann law for pure metals at constant temperature. On the contrary, the conductivity to tensile strength cross-property connections showed significant linear increase (over 200 % in the investigated composition range) for both electrical conductivity and thermal conductivity of composite materials. The cross-property connections of conductivity to the elongation to fracture exhibit a nonlinear dependence on the volume fraction of graphite.     

Effect of enzymatic degradation of chitosan in polyhydroxybutyrate/chitosan/calcium phosphate composites on in vitro osteoblast response

Polyhydroxybutyrate/chitosan/calcium phosphate composites are interesting biomaterials for utilization in regenerative medicine and they may by applied in reconstruction of deeper subchondral defects. Insufficient informations were found in recent papers about the influence of lysozyme degradation of chitosan in calcium phosphate/chitosan based composites on in vitro cytotoxicity and proliferation activity of osteoblasts. The effect of enzymatic chitosan degradation on osteoblasts proliferation was studied on composite films in which the porosity of origin 3D scaffolds was eliminated and the surface texture was modified. The significantly enhanced proliferation activity with faster population growth of osteoblasts were found on enzymatically degraded biopolymer composite films with α-tricalcium phosphate and nanohydroxyapatite. No cytotoxicity of composite films prepared from lysozyme degraded scaffolds containing a large fraction of low molecular weight chitosans (LMWC), was revealed after 10 days of cultivation. Contrary to above in the higher cytotoxicity origin untreated nanohydroxyapatite films and porous composite scaffolds. The results showed that the synergistic effect of surface distribution, morphology of nanohydroxyapatite particles, microtopography and the presence of LMWC due to chitosan degradation in composite films were responsible for compensation of the cytotoxicity of nanohydroxyapatite composite films or porous composite scaffolds.