Associations between apolipoprotein E genotype and circulating F<Subscript>2</Subscript>-isoprostane levels in humans

Apolipoprotein E (apoE), an important determinant of plasma lipoprotein metabolism, has three common alleles (ε2, ε3, and ε4). Population studies have shown that the risk of diseases characterized by oxidative damage, such as coronary heart disease and Alzheimer’s disease, is significantly higher in ɛ4 carriers. We evaluated the association between apoE genotypes and plasma F₂-isoprostane levels, an index of lipid peroxidation, in humans. Two hundred seventy-four healthy subjects (104 males, 170 females; 46.9±13.0 yr; 200 whites, 74 blacks; 81 nonsmokers, 64 passive smokers, and 129 active smokers) recruited for a randomized clinical antioxidant intervention trial were included in this analysis. ApoE genotype was determined by PCR and restriction enzyme digestion. Free plasma F₂-isoprostane was measured by GC-MS. Genotype groups were compared using multiple regression analysis with adjustment for sex, age, race, smoking status, body mass index, plasma ascorbic acid, and β-carotene. Subjects with ε3/ε4 and ε4/ε4 genotype (ε4-carriers) and with ε2/ε3 and ε3/ε3 (non-ε4-carriers) were pooled for analysis. In subjects with high cholesterol levels (total cholesterol above 200 mg/dl), plasma F₂-isoprostane levels were 29% higher in ε4 carriers than in non-ε4-carriers (P=0.0056). High-cholesterol subjects that are ε4 carriers have significantly higher levels of lipid peroxidation as assessed by circulating F₂-isoprostane levels.     

Hydrocarbon condensation modelling to mitigate fluid coker cyclone fouling

FLUID COKING is a continuous process that thermally converts heavy hydrocarbons, such as oil sands bitumen, to lighter and higher‐value products by horizontal spray injection onto a fluidized bed of hot coke particles. The cyclone sections of commercial fluid coker reactors experience fouling during typical operation, which limits unit run lengths. The main objective of this work is to improve fluid coker reliability by proposing cyclone fouling mitigation strategies based on practical operation modifications. This study developed a process simulation in Aspen Plus to establish the combined impact of vapour‐liquid equilibrium, endothermic thermal cracking reactions, pressure changes, and overall fluid dynamics in the selected fluid coker control volumes. The hydrocarbon composition was defined by applying an assay characterization of distillation data for representative hydrocarbon streams. Case studies were performed to determine the sensitivity of the predicted temperatures and hydrocarbon condensate flow rates for: (a) the burner‐to‐fluid coker transfer line temperature; (b) the hot coke flow rate; (c) hot coke entrainment from the freeboard region; and (d) scouring coke flow rate in the horn chamber. The scouring coke flow rate was identified as the most promising process lever to mitigate fluid coker cyclone fouling.     

Microstructure and tensile properties of squeeze cast magnesium alloy AM50

High-pressure die cast magnesium alloy AM50 is currently used extensively in large and complex shaped thin-wall automotive components. For further expansion of the alloy usage in automobiles, novelmanufacturing processes need to be developed. In this study, squeeze casting of AM50 alloy with a relatively thick cross section was carried out using a hydraulic press with an applied pressure of 70 MPa. Microstructure and mechanical properties of the squeeze cast AM50 with a cross-section thickness of 10 mm were characterized in comparison with the die cast counterpart. The squeeze cast AM50 alloy exhibits virtually no porosity in the microstructure as evaluated by both optical microscopy and the density measurement technique. The results of tensile testing indicate the improved tensile properties, specifically ultimate tensile strength and elongation, for the squeeze cast samples over the conventional high-pressure die cast parts. The analysis of tensile behavior show that the strain-hardening rate during the plastic deformation of the squeeze cast specimens is constantly higher than that of the die cast specimens. The scanning electron microscopy fractography evidently reveals the ductile fracture features of the squeeze cast alloy AM50.     

Integrated adaptive robust control for multilateral teleoperation systems under arbitrary time delays

With the increasing industrial requirements such as bigger size object, stable operation, and complex task, multilateral teleoperation systems extended from traditional bilateral teleoperation are widely developed. In this paper, the integrated control design is developed for multilateral teleoperation systems, where n master manipulators are operated by human to remotely control n slave manipulators cooperatively handling a target object. For the first time, the control objectives of multilateral teleoperation including stability, synchronization, transparency, and internal force distribution are clarified systematically. A novel communication architecture is proposed to cope with communication delays, where the estimated environmental parameters are transmitted from the slave side to the master, to replace the traditional environmental force measurement in the communication channel. A kind of nonlinear adaptive robust control technique is used to deal with nonlinearities, unknown parameters, and modeling uncertainties existing in the master, slave, and environmental dynamics, so that the excellent tracking performance is achieved in both master and slave sides. The coordinated motion/force control is designed in the slave side by the optimal internal force distribution among n slave manipulators, and the impedance control is designed in the master side to realize the target transparency behavior. In summary, the proposed control algorithm can achieve the guaranteed robust stability, the excellent synchronization and transparency performance, and the optimal internal force distribution simultaneously for multilateral teleoperation systems under arbitrary time delays and various modeling uncertainties. The simulation is carried out on a 2‐master/2‐slave teleoperation system, and the results show the effectiveness of the proposed control design. Copyright © 2015 John Wiley & Sons, Ltd.     

Empirical evaluation of computational fear contagion models in crowd dispersions

In social psychology, emotional contagion describes the widely observed phenomenon of one person’s emotions being influenced by surrounding people’s emotions. While the overall effect is agreed upon, the underlying mechanism of the spread of emotions has seen little quantification and application to computational agents despite extensive evidence of its impacts in everyday life. In this paper, we examine computational models of emotional contagion by implementing two models (Bosse et al., European council on modeling and simulation, pp. 212–218, 2009) and Durupinar, From audiences to mobs: Crowd simulation with psychological factors, PhD dissertation, Bilkent University, 2010) that draw from two separate lines of contagion research: thermodynamics-based and epidemiological-based. We first perform sensitivity tests on each model in an evacuation simulation, ESCAPES, showing both models to be reasonably robust to parameter variations with certain exceptions. We then compare their ability to reproduce a real crowd panic scene in simulation, showing that the thermodynamics-style model (Bosse et al., European council on modeling and simulation, pp. 212–218, 2009) produces superior results due to the ill-suited contagion mechanism at the core of epidemiological models. We also identify that a graduated effect of fear and proximity-based contagion effects are key to producing the superior results. We then reproduce the methodology on a second video, showing that the same results hold, implying generality of the conclusions reached in the first scene.     

Characterization of Sky‐region Morphological‐temporal Airborne Collision Detection

Automated airborne collision‐detection systems are a key enabling technology for facilitating the integration of unmanned aerial vehicles (UAVs) into the national airspace. These safety‐critical systems must be sensitive enough to provide timely warnings of genuine airborne collision threats, but not so sensitive as to cause excessive false alarms. Hence, an accurate characterization of detection and false‐alarm sensitivity is essential for understanding performance tradeoffs, and system designers can exploit this characterization to help achieve a desired balance in system performance. In this paper, we experimentally evaluate a sky‐region, image‐based, aircraft collision‐detection system that is based on morphological and temporal processing techniques. (Note that the examined detection approaches are not suitable for the detection of potential collision threats against a ground clutter background.) A novel collection methodology for collecting realistic airborne collision‐course target footage in both head‐on and tail‐chase engagement geometries is described. Under (hazy) blue sky conditions, our proposed system achieved detection ranges greater than 1540 m in three flight test cases with no false‐alarm events in 14.14 h of nontarget data (under cloudy conditions, the system achieved detection ranges greater than 1170 m in four flight test cases with no false‐alarm events in 6.63 h of nontarget data). Importantly, this paper is the first documented presentation of detection range versus false‐alarm curves generated from airborne target and nontarget image data. © 2012 Wiley Periodicals, Inc.     

Discipline-based instruction to promote interdisciplinary design of wearable and pervasive computing products

This paper reports on a design experience for undergraduates in computer engineering, industrial design, and marketing that focuses on pervasive computing devices. Across a broad range of targeted application areas and user groups, many of the student designs have been wearable computers. Consequently, our course will be of interest to the wearable computing community, particularly in terms of our aim of bridging the gap between design and engineering. For the two most recent offerings of the course, we have utilized external observers and surveyed the students in order to validate the impact of aspects of our process and changes to it. This paper is based upon 5 years of experience and 2 years of analysis of our course, and it presents an overview of our process with both qualitative and quantitative results from these two most recent offerings.     

Comparison of satellite-derived and in-situ observations of ice and snow surface temperatures over Greenland

The most practical way to get spatially broad and continuous measurements of the surface temperature in the data-sparse cryosphere is by satellite remote sensing. The uncertainties in satellite-derived LSTs must be understood to develop internally-consistent decade-scale land surface temperature (LST) records needed for climate studies. In this work we assess satellite-derived “clear-sky” LST products from the Moderate Resolution Imaging Spectroradiometer (MODIS) and the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER), and LSTs derived from the Enhanced Thematic Mapper Plus (ETM+) over snow and ice on Greenland. When possible, we compare satellite-derived LSTs with in-situ air temperature observations from Greenland Climate Network (GC-Net) automatic weather stations (AWS). We find that MODIS, ASTER and ETM+ provide reliable and consistent LSTs under clear-sky conditions and relatively-flat terrain over snow and ice targets over a range of temperatures from ? 40 to 0 °C. The satellite-derived LSTs agree within a relative RMS uncertainty of ~ 0.5 °C. The good agreement among the LSTs derived from the various satellite instruments is especially notable since different spectral channels and different retrieval algorithms are used to calculate LST from the raw satellite data. The AWS record in-situ data at a “point” while the satellite instruments record data over an area varying in size from: 57 × 57 m (ETM+), 90 × 90 m (ASTER), or to 1 × 1 km (MODIS). Surface topography and other factors contribute to variability of LST within a pixel, thus the AWS measurements may not be representative of the LST of the pixel. Without more information on the local spatial patterns of LST, the AWS LST cannot be considered valid ground truth for the satellite measurements, with RMS uncertainty ~ 2 °C. Despite the relatively large AWS-derived uncertainty, we find LST data are characterized by high accuracy but have uncertain absolute precision.