Effect of magnetically simulated zero-gravity and enhanced gravity on the walk of the common fruitfly

Understanding the effects of gravity on biological organisms is vital to the success of future space missions. Previous studies in Earth orbit have shown that the common fruitfly (Drosophila melanogaster) walks more quickly and more frequently in microgravity, compared with its motion on Earth. However, flight preparation procedures and forces endured on launch made it difficult to implement on the Earth''s surface a control that exposed flies to the same sequence of major physical and environmental changes. To address the uncertainties concerning these behavioural anomalies, we have studied the walking paths of D. melanogaster in a pseudo-weightless environment (0g*) in our Earth-based laboratory. We used a strong magnetic field, produced by a superconducting solenoid, to induce a diamagnetic force on the flies that balanced the force of gravity. Simultaneously, two other groups of flies were exposed to a pseudo-hypergravity environment (2g*) and a normal gravity environment (1g*) within the spatially varying field. The flies had a larger mean speed in 0g* than in 1g*, and smaller in 2g*. The mean square distance travelled by the flies grew more rapidly with time in 0g* than in 1g*, and slower in 2g*. We observed no other clear effects of the magnetic field, up to 16.5 T, on the walks of the flies. We compare the effect of diamagnetically simulated weightlessness with that of weightlessness in an orbiting spacecraft, and identify the cause of the anomalous behaviour as the altered effective gravity.     

Electrochromic behavior of W(x)Si(y)O(z) thin films prepared by reactive magnetron sputtering at normal and glancing angles

This work reports the synthesis at room temperature of transparent and colored W(x)Si(y)O(z) thin films by magnetron sputtering (MS) from a single cathode. The films were characterized by a large set of techniques including X-ray photoelectron spectroscopy (XPS), Rutherford backscattering spectrometry (RBS), Fourier transform infrared (FT-IR), and Raman spectroscopies. Their optical properties were determined by the analysis of the transmission and reflection spectra. It was found that both the relative amount of tungsten in the W-Si MS target and the ratio O(2)/Ar in the plasma gas were critical parameters to control the blue coloration of the films. The long-term stability of the color, attributed to the formation of a high concentration of W(5+) and W(4+) species, has been related with the formation of W-O-Si bond linkages in an amorphous network. At normal geometry (i.e., substrate surface parallel to the target) the films were rather compact, whereas they were very porous and had less tungsten content when deposited in a glancing angle configuration. In this case, they presented outstanding electrochromic properties characterized by a fast response, a high coloration, a complete reversibility after more than one thousand cycles and a relatively very low refractive index in the bleached state.     

Improving the Performance of Hyperspectral Image and Signal Processing Algorithms Using Parallel,Distributed and Specialized Hardware-Based Systems

Advances in sensor technology are revolutionizing the way remotely sensed data is collected, managed and analyzed. The incorporation of latest-generation sensors to airborne and satellite platforms is currently producing a nearly continual stream of high-dimensional data, and this explosion in the amount of collected information has rapidly created new processing challenges. For instance, hyperspectral signal processing is a new technique in remote sensing that generates hundreds of spectral bands at different wavelength channels for the same area on the surface of the Earth. Many current and future applications of remote sensing in Earth science, space science, and soon in exploration science will require (near) real-time processing capabilities. In recent years, several efforts have been directed towards the incorporation of high-performance computing (HPC) systems and architectures in remote sensing missions. With the aim of providing an overview of current and new trends in parallel and distributed systems for remote sensing applications, this paper explores three HPC-based paradigms for efficient implementation of the Pixel Purity Index (PPI) algorithm, available from the popular Kodak’s Research Systems ENVI software package, as a representative case study for demonstration purposes. Several different parallel programming techniques are used to improve the performance of the PPI on a variety of parallel platforms, including a set of message passing interface (MPI)-based implementations on a massively parallel Beowulf cluster at NASA’s Goddard Space Flight Center in Maryland and on a variety of heterogeneous networks of workstations at University of Maryland; a Handel-C implementation of the algorithm on a Virtex-II field programmable gate array (FPGA); and a compute unified device architecture (CUDA)-based implementation on graphical processing units (GPUs) of NVidia. Combined, these parts deliver an excellent snapshot of the state-of-the-art in those areas, and offer a thoughtful perspective on the potential and emerging challenges of adapting HPC systems to remote sensing problems.     

Determination of atrazine residues in red wine samples. A conductimetric solution

The potential of a conductimetric immunosensor to detect residual amounts of atrazine in a complex matrix, such as red wine, is evaluated. The immunosensor presented is based on interdigitated μ-electrodes (IDμEs), immunoreagents specifically developed to detect atrazine, and antibodies labelled with gold nanoparticles. Due to the amplification of the conductive signal, produced by the presence of the gold particles, atrazine can be detected using simple and inexpensive direct current (DC) measurements. Then, sensors response is related to the atrazine concentration in the sample. Likewise, the presence of gold particles generates an increase in the intensity of the electric field between the electrodes. The time for assay completion, for 48 samples, was 5 h. Nevertheless, during the first hour (devoted to the incubation assays), the number of samples could be increased without prejudice the assay duration.     

Autonomic cardiovascular control following transient arousal from sleep: a time-varying closed-loop model

Recent studies suggest that exposure to repetitive episodes of hypoxia and transient arousal can lead to increased risk for cardiovascular disease in patients with obstructive sleep apnea syndrome (OSAS). To obtain an improved understanding of and to quantitatively characterize the autonomic effects of arousal from sleep, a time-varying closed-loop model was used to determine the interrelationships among respiration, heart rate and blood pressure in 8 normal adults. A recursive least squares algorithm was used in combination with the Laguerre expansion technique to estimate the time-varying impulse responses of the 4 model components. We found that during arousal: 1) respiratory-cardiac coupling gain increases in nonrapid-eye movement (NREM) but not in REM sleep; 2) in both NREM and REM sleep, baroreflex gain shows an initial increase, but this is followed by a more sustained decrease below pre-arousal baseline levels, allowing sympathetic tone to be elevated over a relatively long duration; 3) the gains of other model components show increases with arousal that are consistent with the increased sympathetic modulation of systemic vascular resistance and contractility of the heart. These findings establish a normative database against which further measurements of cardiovascular arousal responses in OSAS may be compared.     

Removal of diazinon by various advanced oxidation processes

Diazinon is a widely used organophosphorus insecticide that is an important pollutant in aquatic environments. The chemical removal of diazinon has been studied using UV radiation, ozone, Fenton's reagent, UV radiation plus hydrogen peroxide, ozone plus hydrogen peroxide and photo‐Fenton as oxidation processes. In the photodegradation process the observed quantum yields had values ranging between 2.42 × 10^?2 and 6.36 × 10^?2 mol E^?1. Similarly, the ozonation reaction gave values for the rate constant ranging between 0.100 and 0.193 min^?1. In the combined systems UV/H₂O₂ and O₃/H₂O₂ the partial contributions to the global oxidation reaction of the direct and radical pathways were deduced. In the Fenton's reagent and photo‐Fenton systems, the mechanism of reaction has been partially discussed, and the predominant role of the radical pathway pointed out. Additionally, the rate constant for the reaction between diazinon and the hydroxyl radicals was determined, with the value 8.4 × 10⁹ L mol^?1 s^?1 obtained. A comparison of the different oxidation systems tested under the same operating conditions revealed that UV radiation alone had a moderate oxidation efficiency, which is enhanced in the case of ozone, while the most efficient oxidant is the photo‐Fenton system. Copyright © 2007 Society of Chemical Industry     

Undesired components in the transformation of biomass pyrolysis oil into hydrocarbons on an HZSM‐5 zeolite catalyst

The results of the catalytic transformation on HZSM‐5 zeolite of mixtures of components of biomass pyrolysis oil in the 673–723 K temperature range are evidence of the need for previously separating certain components (aldehydes, oxyphenols and furfural) that undergo severe thermal degradation by forming carbonaceous deposits at the reactor inlet ducts and on the catalyst itself. The deactivation of the catalyst is a consequence of the deposition of two different types of coke: one of catalytic origin (similar to that generated in the transformation of methanol and bioethanol) and the other of thermal origin, which is produced by the aforementioned degradation. The remaining oxygenate components react to each other with synergistic effect, which means that their reactivity is higher than that of the pure components. The results show that the aqueous fraction of biomass pyrolysis oil may be transformed into hydrocarbons on acid catalysts similarly to the more familiar transformation of methanol and bioethanol. Copyright © 2005 Society of Chemical Industry     

Range-Doppler image processing in linear FMCW radar and FPGA based real-time implementation

The paper introduces an FPGA based signal processing system to perform Range-Doppler processing in real-time for Linear FMCW （frequency Modulated Continuous Wave） radar systems. Novel design architecture in FPGA is proposed and experimental results indicate that the design can verify the correct operation of the processing flow. The Ping-Pang architecture in FPGA saves the resources in chip and the system has been designed so as to allow future addition of complex target detection algorithms.