Characterization of reactive graphene oxide synthesized from ball – milled graphite: its enhanced reinforcing effects on cement nanocomposites

In this study, commercial graphite powder (GP) of particle size 100 micron was subjected to high energy ball-milling (HEBM) to produce ball-milled graphite powder (BMGP) of particle size 780 nm. Both GP and BMGP were converted to respective graphene oxides (GOs) (labeled as GO1 and GO2) using Hummer’s method, which were then characterized using techniques such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X- ray diffraction (XRD). GO1 and GO2 were then investigated for their effects on compressive strength of cement mortar matrix at different curing times of 7, 14, and 28 days. Effect of variation of concentration (ranging between 0.125 and 1.00 wt% of cement) of GO1 and GO2 on the strength of matrix was examined. Microstructures of GO1-cement mortar nanocomposite and GO2-cement mortar nanocomposite were studied after 28 days of curing using SEM. Obtained results show that addition of 1.00 wt% GO1 and GO2 showed best performance by increasing the strength to 63 and 78%, respectively, in comparison to the unreinforced control sample. Improved performance of GO2 was attributed to more number of reactive sites of GO nanosheets induced by ball-milling treatment of graphite precursor.     

Poly(alkylene oxide) copolymers for nucleic acid delivery

The advancement of gene-based therapeutics to the clinic is limited by the ability to deliver physiologically relevant doses of nucleic acids to target tissues safely and effectively. Over the last couple of decades, researchers have successfully employed polymer and lipid based nanoassemblies to deliver nucleic acids for the treatment of a variety of diseases. Results of phase I/II clinical studies to evaluate the efficacy and biosafety of these gene delivery vehicles have been encouraging, which has promoted the design of more efficient and biocompatible systems. Research has focused on designing carriers to achieve biocompatibility, stability in the circulatory system, biodistribution to target the disease site, and intracellular delivery, all of which enhance the resulting therapeutic effect. The family of poly(alkylene oxide) (PAO) polymers includes random, block, and branched structures, among which the ABA type triblocks copolymers of ethylene oxide (EO) and propylene oxide (PO) (commercially known as Pluronic) have received the greatest consideration. In this Account, we highlight examples of polycation-PAO conjugates, liposome-PAO formulations, and PAO micelles for nucleic acid delivery. Among the various polymer design considerations, which include molecular weight of polymer, molecular weight of blocks, and length of blocks, the overall hydrophobic-lipophilic balance (HLB) is a critical parameter in defining the behavior of the polymer conjugates for gene delivery. We discuss the effects of varying this parameter in the context of improving gene delivery processes, such as serum stability and association with cell membranes. Other innovative macromolecular modifications discussed in this category include our work to enhance the serum stability and efficiency of lipoplexes using PAO graft copolymers, the development of a PAO gel-based carrier for sustained and stimuli responsive delivery, and the development of biodegradable PAO-based amphiphilic block copolymers.     

Rapid extraction of Cu(II) heavy metal from industrial waste water by using silver nanoparticles anchored with novel Schiff base

A new Schiff base named N-(4-hydroxy-3-methoxy benzylidine)-biphenyl-4-amine was synthesized from refluxing of equimolar quantity of vanillin and biphenyl-4-amine in alcoholic medium. Its composition, properties, and morphology were characterized by elemental analysis, FTIR (Fourier-transform infrared spectroscopy), UV–vis (ultraviolet visible spectroscopy), nuclear magnetic resonance spectroscopy, and mass spectral studies. Then, silver nanoparticles were synthesized by chemical reduction method and characterized by scanning electron microscope, UV–vis, FTIR, and mass spectra. The silver nanoparticles are then trapped with Schiff base by suitable method. The metal ion was analyzed by atomic absorption spectroscopy. Sugarcane bagasse (SCB) was used as solid phase for the removal of heavy metal from industrial waste water. Activation of solid phase was done with the base and acid, respectively. The Ag nano@Schiff base was adsorbed on the SCB. The effects of several parameters that affect the adsorption of Cu(II) metal ion including initial metal ion concentration, contact time, Schiff base weight, and pH were analyzed.     

Comprehensive review on agro technologies of low‐calorie natural sweetener stevia (Stevia rebaudiana Bertoni): a boon to diabetic patients

Stevia rebaudiana Bertoni is a low‐calorie natural sweetener plant native to Paraguay. The leaves of stevia have sweetening compounds called steviol glycosides (SGs), which contain different marker compounds, i.e. stevioside (St), rebaudioside (Rb) A, B, C, D and E, dulcoside A and steviol biosides, which are nearly 300 times sweeter than sugar. Stevia is a better alternative to sugar in formulating food products, reducing the harmful effect of sugar and improving the nutrient properties. We have tried to compile a literature on various agronomic and management aspects which are helpful in increasing the yield and quality of stevia to be grown as a crop that will benefit farmers and industrialists. The stevioside thus obtained can be used to make different food products for sweetening purposes, which could be a boon to diabetic patients. Incorporation of different agronomic techniques like propagation method, transplanting time, intercropping, irrigation, mulching, plant geometry, pinching and harvesting time not only improve the biomass but also increase the quality of stevia. Therefore, agronomic considerations are of high priority to utilize its maximum potential. © 2015 Society of Chemical Industry     

Failure Analysis of an Air Turbine Starter

Air turbine starters (ATS) are used for the ground start of aircraft engines. This case history describes the failure of an ATS that occurred while starting a developmental gas turbine engine. Fractographic features indicated that few blades of the turbine rotor disc failed in a progressive mode while the remaining blades of the rotor disc indicated failure by overload. The rotor shaft also exhibited features of sudden overload. Analysis of the previous records revealed the observation of sparks developing while the starter was in operation. This indicated possibility of blade tip rubbing which resulted in fatigue crack initiation at the blade root leading to failure.     

Scanning electron microscope investigation on the process of healing of skin wounds in Cirrhinus mrigala

Present scanning electron microscope study, reports healing of excised skin wounds in Cirrhinus mrigala. Healing process of wounds, inflicted on head skin, using biopsy punch was observed at intervals—0 hour (h), 1, 2, 4, 6, 12 h, 1 day (d) 2 and 4 d. Accumulation of mucus in wound region within 1h after infliction of wound has been considered an immediate measure to provide protection to injured skin from microbial invasion and other external environmental hazards. On infliction of wound, mobilization of epithelial cells at wound edge is associated with disturbance of coaptive relationship of epithelial cells till original coaptive stability is reached. At 6–12 h appearance of epidermal ridge in region of contact of migrating fronts is due to piling up of epithelial cells. This is associated with cessation of migration of epithelial cells and their simultaneous continual arrival in the region. Speedy epithelialization of skin wounds in C. mrigala like in other fishes, compared to that of mammals and other higher vertebrates, is possibly facilitated owing to surrounding wet external environment. Microridges in initial stages of wound healing appear fragmented without particular orientation. Further, epithelial cells in epithelium in wound region and in region adjacent to wound elongate. These changes are associated with the stretching of epithelial cells indicating their streaming and migration, toward wound. Presence of superficial neuromasts, smallest functional units of lateral line system, a hydrodynamic sensory system, has been associated with important functional significance in fish.     

Direct use of mixing data for modeling high-viscosity,melt-phase,condensation polymer reactors

Mathematical models for simultaneous reaction and mass transfer occurring in the manufacture of high-viscosity condensation polymers are considered. Particle tracking experiments are used to estimate convective flow rates and mixing volumes in a disc-ring reactor configuration. These results are incorporated directly into a mixing-cell model without resorting to the use of restrictive assumptions regarding the convective mixing. Both a penetration theory model and a flash evaporation model are used to simulate the transport at the liquid–vapor interface. Although widely used in previous studies, the penetration theory model is ultimately rejected because it underpredicts the overall reactivity. Model results predict interactions between agitation rate, residence time, and the overall reaction rate for commercial-scale systems producing poly(ethylene terephthalate). The model is partially verified by comparison with degassing data. © 1995 John Wiley & Sons, Inc.     

Development and Implementation of Current Tee for AC High Current Calibration

Thermal current converters or thermal transfer standard with AC–DC current shunts act as the reference standards for accurate and precise measurements of low frequency current in the frequency range from 40 Hz to 10 kHz. At present CSIR-NPL, India has the AC–DC current transfer difference (δ _x) calibration facility upto 20 A. To extend our AC current calibration range from 20 A to 100 A, a current Tee for AC high current using LC connectors has been indigenously designed and developed. This paper presents the development of current Tee for AC high current calibration. The calibration results for assigning ‘δ _x’ at 30 A current shunt with respect to 20 A are shown and the same measurement technique has been used to extend the current range up to 100 A.