Hyperhomocysteinemia and Cardiovascular Disease: Is the Adenosinergic System the Missing Link?

The influence of hyperhomocysteinemia (HHCy) on cardiovascular disease (CVD) remains unclear. HHCy is associated with inflammation and atherosclerosis, and it is an independent risk factor for CVD, stroke and myocardial infarction. However, homocysteine (HCy)-lowering therapy does not affect the inflammatory state of CVD patients, and it has little influence on cardiovascular risk. The HCy degradation product hydrogen sulfide (H₂S) is a cardioprotector. Previous research proposed a positive role of H₂S in the cardiovascular system, and we discuss some recent data suggesting that HHCy worsens CVD by increasing the production of H₂S, which decreases the expression of adenosine A_2A receptors on the surface of immune and cardiovascular cells to cause inflammation and ischemia, respectively.     

The GNAQ T96S Mutation Affects Cell Signaling and Enhances the Oncogenic Properties of Hepatocellular Carcinoma

Hepatocellular carcinoma (HCC), the most common malignant tumor in the liver, grows and metastasizes rapidly. Despite advances in treatment modalities, the five-year survival rate of HCC remains less than 30%. We sought genetic mutations that may affect the oncogenic properties of HCC, using The Cancer Genome Atlas (TCGA) data analysis. We found that the GNAQ T96S mutation (threonine 96 to serine alteration of the Gαq protein) was present in 12 out of 373 HCC patients (3.2%). To examine the effect of the GNAQ T96S mutation on HCC, we transfected the SK-Hep-1 cell line with the wild-type or the mutant GNAQ T96S expression vector. Transfection with the wild-type GNAQ expression vector enhanced anchorage-independent growth, migration, and the MAPK pathways in the SK-Hep-1 cells compared to control vector transfection. Moreover, cell proliferation, anchorage-independent growth, migration, and the MAPK pathways were further enhanced in the SK-Hep-1 cells transfected with the GNAQ T96S expression vector compared to the wild-type GNAQ-transfected cells. In silico structural analysis shows that the substitution of the GNAQ amino acid threonine 96 with a serine may destabilize the interaction between the regulator of G protein signaling (RGS) protein and GNAQ. This may reduce the inhibitory effect of RGS on GNAQ signaling, enhancing the GNAQ signaling pathway. Single nucleotide polymorphism (SNP) genotyping analysis for Korean HCC patients shows that the GNAQ T96S mutation was found in only one of the 456 patients (0.22%). Our data suggest that the GNAQ T96S hotspot mutation may play an oncogenic role in HCC by potentiating the GNAQ signal transduction pathway.     

Quantification of secondary structure prediction improvement using multiple alignments

The use of multiple sequence alignments for secondary structurepredictions is analysed. Seven different protein families, containingonly sequences of known structure, were considered to providea range of alignment and prediction conditions. Using alignmentsobtained by spatial superposition of main chain atoms in knowntertiary protein structures allowed a mean of 8% in secondarystructure prediction accuracy, when compared to those obtainedfrom the individual sequences. Substitution of these alignmentsby those determined directly from an automated sequence alignmentalgorithm showed variations in the prediction accuracy whichcorrelated with the quality of the multiple alignments and distanceof the primary sequence. Secondary structure predictions canbe reliably improved using alignments from an automatic alignmentprocedure with a mean increase of 6.87percnt;, giving an overallprediction accuracy of 68.5%, if there is a minimum of 25% sequenceidentity between all sequences in a family.     

THE “UCKRON-1” TEST PROBLEM FOR REACTION ENGINEERING MODELING

Testing kinetic models against a “true” and detailed kinetic expression was the aim of the Workshop on Kinetic Model Development at the Denver AIChE Meeting in August, 1983. For this purpose an artificial reaction mechanism was created, based on the known thermodynamics of the methanol synthesis as a framework. The kinetic rate laws, that were derived from this mechanism, were made thermodynamically consistent by achieving agreement between equilibrium constants calculated at various temperatures from the given, real original thermodynamic relationship and those calculated from the detailed reversible kinetic expressions.

Using the artificial kinetics as the "true" one, CSTR experiments were simulated. The results of a statistically designed set of experiments were published after 5% random error was added to the data. Participation was invited for all interested to correlate the data, develop kinetic models and to calculate the performance of the specified reactor.

The results of 19 submitted entries are summarized with the conclusion that the models had more differences than were expected, but their predictive values were not as different as was anticipated, if the extreme high production rates due to thermal runaways are not considered. This in turn points out the necessity to check models experimentally, in pilot plant, not only for predicted optimum, but also for calculated runaway conditions. Models which did not capture the true character of this reaction failed to predict the onset of runaway reactions.     

Microstructure and morphology of amine-cured epoxy coatings before and after outdoor exposures—An AFM study

Atomic force microscopy (AFM) has been used to study the morphology and microstructure of an amine-cured epoxy before and after outdoor exposure. Measurements were made from samples prepared in an essentially CO₂-free, H₂O-free glove box and from samples prepared in ambient conditions. For those prepared in a CO₂-free glove box, AFM imaging was conducted on (1) an unexposed air/coating surface, (2) an unexposed coating bulk, (3) an unexposed coating/substrate interface, and (4) a field exposed air/coating surface. For samples prepared in ambient conditions, only the unexposed air/coating surface was investigated. The same regions of the exposed samples were scanned periodically by the AFM to monitor changes in the surface morphology of the coating as UV exposure progressed. Small angle neutron scattering and Fourier transform infrared spectroscopy (FTIR) studies were performed to verify the microstructure and to follow chemical changes during outdoor exposure, respectively. The results have shown that amine blushing, which occurs only under ambient conditions, had a significant effect on the surface morphology and microstructure of the epoxy. The surface morphology of the samples prepared under CO₂-free, dry conditions was generally smooth and homogeneous. However, the interface and the bulk samples clearly revealed a two-phase structure consisting of bright nodular domains and dark interstitial regions, indicating an inhomogeneous microstructure. Such heterogeneous structure of the bulk was in good agreement with results obtained by small angle neutron scattering of unexposed samples and by AFM phase imaging of the degraded sample surface. The relationship between submicrometer physical changes and molecular chemical degradation is discussed. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004, in Chicago, IL.     

FA composition and regiospecific analysis of Acer saccharum (sugar maple tree) and Acer saccharinum (silver maple tree) seed oils

GC analysis was performed to determine regiospecific distribution and FA composition in seed oils of the Aceraceae species, Acer saccharum and A. saccharinum. The oil content in the seeds was low at 5.0% in A. saccharum and 5.8% in A. saccharinum, and the main FA were linoleic (30.8 and 29.4%), oleic (21.3 and 27.6%), palmitic (10.1 and 10.5%), and cis-vaccenic (9.4 and 7.9%) acids, respectively. In addition, both oils contained long-chain monoenes of the n−9 and n−7 groups, including 11-eicosenoic, 13-docosenoic, 15-tetracosenoic, 13-eicosenoic, and 15-docosenoic acids, whereas γ-linolenic acid accounted for 0.8% of total FA in A. saccharum, and 0.5% in A. saccharinum. Regiospecific analysis, performed using the methodology of dibutyroyl derivatives of MAG, indicated that linoleic, oleic, and linolenic acids were mainly esterified at the internal position of TAG in both seed oils, whereas long-chain monoenes of the n−7 group were almost exclusively esterified on the external positions.     

异丁烯两段催化氧化制甲基丙烯酸催化剂研究 Ⅰ．异丁烯气相氧化制甲基丙烯醛多元复合氧化物催化剂的研究

本文报导用于异丁烯（叔丁醇）选择氧化制ＭＡＬ（甲基丙烯醛）的多元复合氧化物催化剂的研究结果。同共沉淀法制备的催化剂的活性主要决定于其化学组成，同时受到制备条件的影响。最佳催化剂的主要物相组成为ＰｂＯ３，Ｂｉ２ＭｏＯ３．３、ＮｉＭｏＯ４、Ｓｂ２Ｏ３及ａ－Ｆｅ２Ｏ３小颗粒。在３５５℃，１０００～２５００ｈ－１空速范围，叔丁醇：水：空气＝１：３．３：７（摩尔比）的条件下可获得异丁烯转化率达９６％，ＭＡＬ选择性达８９％的结果。     

阳极氧化铝的表面参数对硅酮结构的装锒密封胶长期黏结性的影响(连载一)

硅酮密封胶对阳极氧化铝的黏结质量千差万别.影响黏结性的关键因素是铝材表面的封孔程度、氧化层的着色情况、清洁剂的特性以及基材表面清洁与打胶之间允许的时间间隔.由于清洁剂将有机污染物从阳极氧化铝表面去除的效果不同,所以此效果并不和黏结质量有必然联系.据猜测,吸附在阳极氧化铝表面的清洁溶剂会改善基材表面从而提高硅酮胶的黏结性,但这种改善效果会随着清洁溶剂随时间的的挥发而降低.对于给定的溶剂,最佳的黏结效果取决于材料表面的封孔程度.依照ISO 2143酸刻蚀方法测量材料表面的封孔程度,可以预测未着色的阳极氧化铝基材的黏结性.对于着色的阳极氧化铝表面,依照ISO 2931的测试标准,用电相位漂移方法可以用来预测黏结质量.一种控制阳极氧化铝表面的方法被提了出来,此方法是测量不同频率下基材的电阻抗并将它成功地和硅酮密封胶与该材料表面的长期黏接性联系起来.     

Optimization of an herbicide release from ethylcellulose microspheres

Summary The herbicide 2,4-D was microencapsulated using ethyl cellulose to develop controlled release formulations that protect it from photodegradation and evaporation and to reduce the environment pollution. Ethyl cellulose microspheres loaded with 2,4-D were prepared by the emulsion solvent-evaporation technique. We have obtained the desired microspheres with higher drug entrapment and encapsulation yield by varying certain conditions as stirring speed, polymer-solvent ratio, drug-polymer ratio, pH of continuous phase and organic phase solvent. The shape and size of microspheres were analysed by scanning electron microscopy. The herbicide release was studied at 25 °C and the release data were analysed according to Fick’s Law. The results demonstrate that we can control the release rate by modifying the process parameters.