The Relationship Between Flow Paths and Water Quality in Mine Water Oxidation Ponds in South Korea

Tests were carried out at passive mine water treatment sites in South Korea to determine how flow and pH affected other water quality parameters. Computational flow analysis and tracer tests revealed that the water took surprisingly direct flow routes in the oxidation ponds, while other areas remained stagnant. Furthermore, ferrous iron concentration, dissolved oxygen, pH, electrical conductivity, total dissolved solids, turbidity, and water depth were all directly affected by the flow patterns due to the relationship between retention time and iron precipitation.     

Electrochemical recovery of hydrogen from coal acid mine drainage for the enhancement of sulphate reduction using grass cellulose as carbon source

This paper investigates the generation of hydrogen at the cathode in an electrolytic cell treating acid mine drainage (AMD) and the effect of the generated hydrogen on the biological removal of sulphate using grass cellulose. The performance of the bioreactors was assessed by means of sulphate reduction, chemical oxygen demand (COD), and volatile fatty acid (VFA) utilization. To this end, two batch reactors, A, B were operated similarly with the exception of the addition of hydrogen. Reactor A received no hydrogen to act as a control, while reactor B received hydrogen for the experimental duration. Further experiments were conducted to investigate the feasibility of sulphide oxidation to elemental sulphur using air. The results show that during sulphide oxidation, the sulphate concentration decreased from 364 to 183 mg/L, a decrease of 50% and the concentration of sulphide decreased from 163 to 70 mg/L, a decrease of 57%.     

Dispersion of PCB in the environment following an atmospheric release caused by a fire

During a fire at a power plant located in the coastal plain of Israel, PCBs were released to the atmosphere from a ruptured transformer. Since PCBs are probably carcinogenic to humans, this study was performed in order to assess the environmental contamination by PCBs via the atmospheric pathway and the need for remediation measures. The release conditions and the meteorological conditions which prevailed during the fire were analyzed. This provided the input to a Gaussian dispersion model used to estimate the downwind-contaminated sector as well as the location of the maximal concentration within this sector. A sampling plan was then devised and vegetation collected within this sector was analyzed for PCBs. A methodology was developed to convert PCB concentrations in vegetation to concentrations in the atmosphere. It allowed a reconstitution of the PCB source term to the atmosphere from the vegetation measurements. The PCB concentrations were found to be lower than the USEPA decontamination standards. Remediation measures were not needed beyond the plant fence.     

Long-range effect of cyanide on mercury methylation in a gold mining area in southern Ecuador

Small-scale gold mining in Portovelo-Zaruma, Southern Equador, performed by mercury amalgamation and cyanidation, yields 9-10 t of gold/annum, resulting in annual releases of around 0.65 t of inorganic mercury and 6000 t of sodium cyanide in the local river system. The release of sediments, cyanide, mercury, and other metals present in the ore such as lead, manganese and arsenic significantly reduces biodiversity downstream the processing plants and enriches metals in bottom sediments and biota. However, methylmercury concentrations in sediments downstream the mining area were recently found to be one order of magnitude lower than upstream or in small tributaries. In this study we investigated cyanide, bacterial activity in water and sediment and mercury methylation potentials in sediments along the Puyango river watershed, measured respectively by in-situ spectrophotometry and incubation with ³H-leucine and ²⁰³Hg²⁺.Free cyanide was undetectable (< 1 μg·L^− 1) upstream mining activities, reached 280 μg·L^− 1 a few km downstream the processing plants area and was still detectable about 100 km downstream. At stations with detectable free cyanide in unfiltered water, 50% of it was dissolved and 50% associated to suspended particles. Bacterial activity and mercury methylation in sediment showed a similar spatial pattern, inverse to the one found for free cyanide in water, i.e. with significant values in pristine upstream sampling points (respectively 6.4 to 22 μgC·mg wet weight^− 1·h^− 1 and 1.2 to 19% of total ²⁰³Hg·g dry weight^− 1·day^− 1) and undetectable downstream the processing plants, returning to upstream values only in the most distant downstream stations. The data suggest that free cyanide oxidation was slower than would be expected from the high water turbulence, resulting in a long-range inhibition of bacterial activity and hence mercury methylation. The important mercury fluxes resultant from mining activities raise concerns about its biomethylation in coastal areas where many mangrove areas have been converted to shrimp farming.     

Performance of Sulfate-reducing Passive Bioreactors for the Removal of Cd and Zn from Mine Drainage in a Cold Climate

Mine Water and the Environment - Passive treatment is a promising, green technology that is increasingly being used for mine drainage treatment. However, several challenges remain concerning its...     

Characterization of activated sludge flocs by confocal laser scanning microscopy and image analysis

In this study we present a new approach to determine volumes, heterogeneity factors, and compositions of the bacterial population of activated sludge flocs by 3D confocal imaging. After staining the fresh flocs with fluorescein-isothiocyanate, 75 stacks of images (containing approx. 3000 flocs) were acquired with a confocal laser scanning microscope. The self-developed macro 3D volume and surface determination for the KS 400 software package combined the images of one stack to a 3D image and calculated the real floc volume and surface. We determined heterogeneity factors like the ratio of real floc surface to the surface of a sphere with the respective volume and the fractal dimension (D(f)). According to their significant influence on floc integrity and quality, we also investigated the chemical composition of flocs and quantified their bacterial population structure by using group-specific rRNA-targeted probes for fluorescence in situ hybridization. By a settling experiment we enriched flocs with poor settling properties and determined the above-mentioned parameters. This approach revealed shifts in floc volume, heterogeneity, and bacterial and chemical composition according to the settling quality of the flocs.     

Indoor air quality and energy performance of air-conditioned office buildings in Singapore

An integrated indoor air quality (IAQ)-energy audit methodology has been developed in this study in Singapore, which provides a rigorous and systematic method of obtaining the status-quo assessment of an 'IAQ signature' in a building. The methodology entails a multi-disciplinary model in obtaining measured data pertaining to different dimensions within the built environment such as the physical, chemical, biological, ventilation, and occupant response characteristics. This paper describes the audit methodology and presents the findings from five air-conditioned office buildings in Singapore. The research has also led to the development of an indoor pollutant standard index (IPSI), which is discussed in this paper. Other performance indicators such as, the ventilation index and the energy index as well as the building symptom index (BSI) are also presented and discussed in the context of an integrated approach to IAQ and energy. Several correlation attempts were made on the various symptoms, indoor air acceptability, thermal comfort, BSI and IPSI, and while BSI values are found to correlate among them as well as with IAQ and THERMAL COMFORT acceptability, no such correlation was observed between BSI and IPSI. This would suggest that the occupants' perception of symptoms experienced as well as environmental acceptability is quite distinct from IAQ acceptability determined from empirical measurements of indoor pollutants, which reinforces the complex nature of IAQ issues.     

催化逆流反应器(CH4MIN)技术及其在中国的应用潜力

通过一系列的试验，加拿大矿物与能源技术中心开发出了一项专门处理和利用煤矿矿井乏风中甲烷(甲烷体积浓度0．1％～1．0％)的技术——催化逆流反应器(CH4MIN)技术。CH4MIN技术是在催化剂的作用下，促使乏风混合气体的温度升高到足以让甲烷发生氧化，从而产生热量。通过利用这种热量达到利用乏风中甲烷的目的。本文从CH4MIN技术工作原理、试验结果分析、经济可行性分析及在中国的应用前景作了分析和论述。     

Historical perspective of heavy metals contamination (Cd, Cr, Cu, Hg, Pb, Zn) in the Seine River basin (France) following a DPSIR approach (1950-2005)

The Driver-Pressures-State-Impact-Response approach is applied to heavy metals in the Seine River catchment (65,000 km(2); 14 million people of which 10 million are aggregated within Paris megacity; 30% of French industrial and agricultural production). The contamination pattern at river mouth is established on the particulate material at different time scales: 1930-2000 for floodplain cores, 1980-2003 for suspended particulate matter (SPM) and bed-sediments, 1994-2003 for atmospheric fallout and annual flood deposits. The Seine has been among the most contaminated catchments with maximum contents recorded at 130 mg kg(-1) for Cd, 24 for Hg, 558 for Pb, 1620 for Zn, 347 for Cu, 275 for Cr and 150 for Ni. Today, the average levels for Cd (1.8 mg kg(-1)), Hg (1.08), Pb (108), Zn (370), Cu (99), Cr (123) and Ni (31) are much lower but still in the upper 90% of the global scale distribution (Cr and Ni excepted) and well above the natural background values determined on pre-historical deposits. All metal contents have decreased at least since 1955/65, well before metal emission regulations that started in the mid 1970's and the metal monitoring in the catchment that started in the early 1980's. In the last 20 y, major criteria changes for the management of contaminated particulates (treated urban sludge, agricultural soils, dredged sediments) have occurred. In the mid 1990's, there was a complete shift in the contamination assessment scales, from sediment management and water usage criteria to the good ecological state, now required by the 2000 European Directive. When comparing excess metal outputs, associated to river SPM, to the average metal demand within the catchment from 1950 to 2000, the leakage ratios decrease exponentially from 1950 to 2000 for Cd, Cr, Cu, Pb and Zn, meanwhile, a general increase of the demand is observed: the rate of recycling and/or treatment of metals within the anthroposphere has been improved ten-fold. Hg environmental trajectory is very specific: there is a marked decontamination from 1970 to 2000, but the leakage ratio remains very high (10 to 20%) during this period. Drivers and Pressures are poorly known prior to 1985; State evolution since 1935 has been reconstructed from flood plain cores analysis; Impacts were maximum between 1950 and 1970 but remained unknown due to analytical limitation and lack of awareness. Some Responses are lagging 10 y behind monitoring and have much evolved in the past 10 y.     

Local thermal sensation and comfort study in a field environment chamber served by displacement ventilation system in the tropics

This paper presents a study of local thermal sensation (LTS) and comfort in a field environmental chamber (FEC) served by displacement ventilation (DV) system. The FEC, 11.12 m (L)×7.53 m (W)×2.60 m (H), simulates a typical office layout. A total of 60 tropically acclimatized subjects, 30 male and 30 female, were engaged in sedentary office work for 3 h. Subjects were exposed to three vertical air temperature gradients, nominally 1, 3 and 5 K/m, between 0.1 and 1.1 m heights and three room air temperatures of 20, 23 and 26 °C at 0.6 m height. The objective of this study is to investigate the mutual effect of local and overall thermal sensation (OTS) and comfort in DV environment. The results show that in a space served by DV system, at OTS close to neutral, local thermal discomfort decreased with the increase of room air temperature. The OTS of occupants was mainly affected by LTS at the arm, calf, foot, back and hand. Local thermal discomfort was affected by both LTS and OTS. At overall cold thermal sensation, all body segments prefer slightly warm sensation. At overall slightly warm thermal sensation, all body segments prefer slightly cool sensation.