Individual cell lag time distributions of Cronobacter (Enterobacter sakazakii) and impact of pooling samples on its detection in powdered infant formula

Cells of six strains of Cronobacter were subjected to dry stress and stored for 2.5 months at ambient temperature. The individual cell lag time distributions of recovered cells were characterized at 25 °C and 37 °C in non-selective broth. The individual cell lag times were deduced from the times taken by cultures from individual cells to reach an optical density threshold. In parallel, growth curves for each strain at high contamination levels were determined in the same growth conditions. In general, the extreme value type II distribution with a shape parameter fixed to 5 (EVIIb) was the most effective at describing the 12 observed distributions of individual cell lag times. Recently, a model for characterizing individual cell lag time distribution from population growth parameters was developed for other food-borne pathogenic bacteria such as Listeria monocytogenes. We confirmed this model’s applicability to Cronobacter by comparing the mean and the standard deviation of individual cell lag times to populational lag times observed with high initial concentration experiments. We also validated the model in realistic conditions by studying growth in powdered infant formula decimally diluted in Buffered Peptone Water, which represents the first enrichment step of the standard detection method for Cronobacter. Individual lag times and the pooling of samples significantly affect detection performances.     

Neutronic characterization of the MEGAPIE target

The MEGAPIE project aimed to design, build and operate a liquid metal spallation neutron target of about 1 MW beam power in the SINQ facility at the Paul Scherrer Institut (Villigen, Switzerland). This project is an important step in the roadmap towards the demonstration of the accelerator driven system (ADS) concept and high power liquid metal targets in general. Following the design phase, an experimental program was defined to provide a complete characterization of the facility by performing a “mapping” of the neutron flux at different points, from the center of the target to the beam lines. The neutronic performance of the target was studied using different experimental techniques with the goals of validating the Monte Carlo codes used in the design of the target; additionally, the performance was compared with the solid lead targets used before and after the MEGAPIE experiment.     

Genomic Instability Is an Early Event in Aluminium-Induced Tumorigenesis

Genomic instability is generally considered as a hallmark of tumorigenesis and a prerequisite condition for malignant transformation. Aluminium salts are suspected environmental carcinogens that transform mammary epithelial cells in vitro through unknown mechanisms. We report here that long-term culture in the presence of aluminium chloride (AlCl₃) enables HC11 normal mouse mammary epithelial cells to form tumours and metastases when injected into the syngeneic and immunocompetent BALB/cByJ strain. We demonstrate that AlCl₃ rapidly increases chromosomal structural abnormalities in mammary epithelial cells, while we failed to detect direct modulation of specific mRNA pathways. Our observations provide evidence that clastogenic activity—a well-recognized inducer of genomic instability—might account in part for the transforming abilities of aluminium in mammary epithelial cells.     

Evaluation of the sensitivity of microbiological criteria for Listeria monocytogenes in detecting unsafe food according to the prevalence of the pathogen and the shelf-life of the food

The sensitivity of criteria in detecting unsafe food was studied for a hypothetical ready-to-eat food supporting growth of Listeria monocytogenes during storage. The effects of the prevalence of the pathogen and of the duration of the shelf-life on the probability for servings to be unsafe and on the probabilities of detecting unsafe food were evaluated. The results obtained in this example show that the probability for servings to be unsafe increases with the prevalence and the shelf-life while the probabilities of detecting unsafe food depend above all on the prevalence of the pathogen. The current criteria used for L. monocytogenes can then sometimes be relatively ineffective to prevent the consumption of unsafe food with regard to the shelf-life of foods. The exposure assessment approach described in this study could be used to establish shelf-lives consistent with a defined acceptable risk.     

Temporal variations of radon concentration in the saturated soil of Alpine grassland: The role of groundwater flow

Radon concentration has been monitored from 1995 to 1999 in the soil of the Sur-Frêtes ridge (French Alps), covered with snow from November to April. Measurements were performed at 70 cm depth, with a sampling time of 1 h, at two points: the summit of the ridge, at an altitude of 1792 m, and the bottom of the ridge, at an altitude of 1590 m. On the summit, radon concentration shows a moderate seasonal variation, with a high value from October to April (winter), and a low value from May to September (summer). At the bottom of the ridge, a large and opposite seasonal variation is observed, with a low value in winter and a high value in summer. Fluctuations of the radon concentration seem to be associated with temperature variations, an effect which is largely delusory. Indeed, these variations are actually due to water infiltration. A simplified mixing model is used to show that, at the summit of the ridge, two effects compete in the radon response: a slow infiltration response, rich in radon, with a typical time scale of days, and a fast infiltration of radon-poor rainwater. At the bottom of the ridge, similarly, two groundwater contributions compete: one slow infiltration response, similar to the response seen at the summit, and an additional slower response, with a typical time scale of about a month. This second slower response can be interpreted as the aquifer discharge in response to snow melt. This study shows that, while caution is necessary to properly interpret the various effects, the temporal variations of the radon concentration in soil can be understood reasonably well, and appear to be a sensitive tool to study the subtle interplay of near surface transfer processes of groundwater with different transit times.     

Flow investigation of phase change material (PCM) slurry as a heat transfer fluid in a closed loop system

Aqueous phase change material (PCM) particles are dispersed in an organic phase to constitute a slurry for using as a cold heat transfer medium for district cooling in refrigeration and air conditioning industry. The PCM contains 90% of water stabilized by a three‐dimensional network of polymer. The flow behaviour of the slurry is investigated in a small‐scale loop circuit with transparent pipes to allow observation of flow patterns. Data show that pressure drop increases with velocity and decreases with temperature, which can be explained by heterogeneities in flow for temperature higher than 0°C and for Reynolds number (based on the properties of the liquid phase) lower than 7000. A homogeneous particle field is observed for Reynolds number up to 7000, which guarantees a safe operation of the system without the occurrence of clogging in ducts. For this range of flow, the flow rate and the pump consumption for the PCM slurry decrease notably for the same heat transportation quantity compared with chilled water. Copyright © 2008 John Wiley & Sons, Ltd.     

Flying over the reality gap: From simulated to real indoor airships

Because of their ability to naturally float in the air, indoor airships (often called blimps) constitute an appealing platform for research in aerial robotics. However, when confronted to long lasting experiments such as those involving learning or evolutionary techniques, blimps present the disadvantage that they cannot be linked to external power sources and tend to have little mechanical resistance due to their low weight budget. One solution to this problem is to use a realistic flight simulator, which can also significantly reduce experimental duration by running faster than real time. This requires an efficient physical dynamic modelling and parameter identification procedure, which are complicated to develop and usually rely on costly facilities such as wind tunnels. In this paper, we present a simple and efficient physics-based dynamic modelling of indoor airships including a pragmatic methodology for parameter identification without the need for complex or costly test facilities. Our approach is tested with an existing blimp in a vision-based navigation task. Neuronal controllers are evolved in simulation to map visual input into motor commands in order to steer the flying robot forward as fast as possible while avoiding collisions. After evolution, the best individuals are successfully transferred to the physical blimp, which experimentally demonstrates the efficiency of the proposed approach. Jean-Christophe Zufferey and Alexis Guanella contributed equally to this work.     

Capillary electrophoretic study of the complex formation between DNA and cationic surfactants

Due to the growing interest in the use of cationic surfactants for the construction of liposomal genetic delivery systems, the study of complex formation between DNA and quaternary ammonium detergents is of fundamental importance. In this context, we undertook the study of this complex formation using capillary zone electrophoresis (CZE) with suppressed electroosmotic flow, a technique that allowed us to both monitor the change in mobility of DNA as a function of added surfactant in a precise and reproducible manner and evaluate the potential of CZE to reflect the change in hydrodynamic friction upon binding. Nevertheless, CZE must be applied with caution for binding studies where strong cooperativity occurs, because of the presence of peak splitting at concentrations close to the half-point of binding. Also, a comparison between this experiment and Manning's polyelectrolyte transport properties theory on one hand and Tirado and Garcia de la Torre expression for hydrodynamic friction of rod-like molecules on the other hand is given.     

Protection of bifidobacteria encapsulated in polysaccharide-protein gel beads against gastric juice and bile

Bifidobacterium cells were encapsulated in a mixed gel composed of alginate, pectin, and whey proteins. Two kinds of capsules were obtained: gel beads without membranes and gel beads with two membranes formed by the transacylation reaction. In vitro studies were carried out to determine the effects of simulated gastric pH and bile salts on the survival of free and encapsulated Bifidobacterium bifidum. The protective effects of gel beads without membranes and gel beads coated with two membranes formed by the transacylation reaction were evaluated. After 1 h in an acidic solution (pH 2.5), the free-cell counts decreased by 4.75 log units, compared with a <1-log decrease for entrapped cells. The free cells did not survive after 2 h of incubation at pH 2.5, while immobilized-cell counts decreased by about 2 log units. After incubation (1 or 3 h) in 2 and 4% bile salt solutions, the bifidobacterium mortality level for membrane-free gel beads (4 to 7 log units) was higher than that for free cells (2 to 3 log units). However, counts of bifidobacteria immobilized in membrane-coated gel beads decreased by <2 log units. Cell encapsulation in membrane-coated protein-polysaccharide gel beads could be used to increase the survival of healthy probiotic bacteria during their transit through the gastrointestinal tract.     

Network-controlled mobility within radio access networks based onWLAN technologies

This article presents a network-controlled approach of user terminal mobility within anIP based WirelessLAN Access Network. In a first part, this article makes a review of the mobility support, on the subject of emergingWLAN technologies asHIPERLAN/2 andIEEE 802.11, on the one hand, and, regardingIP networks as currently studied withinIETF, on the other hand. Both types ofIP mobility protocols are presented, either global mobility protocols such as MobileIP, or local mobility management protocols (micro mobility). In the next part, the overall principles of our mobility management approach are explained; this approach is based on the implementation of a new network entity dedicated to the control of user terminal mobility. The last part details a practical implementation of this approach. The implementation is carried out on the basis of Hierarchical MobileIPv6 (HMIPv6). The experimental results confirm the importance to carefully plan and control the user terminal mobility within largeIP based Access Networks, as this brings benefit to the user as well as to the operator.