Processing of mesocarbon microbeads to high-performance materials: Part II. Reaction bonding by in situ silicon carbide and nitride formation

The processing of carbon-ceramic composites by utilizing the unique sintering ability of mesocarbon microbeads (MCMB) is reported. The ceramic constituents (silicon nitride and silicon carbide) are formed in situ by reactions between MCMB and silicon in different atmospheres. In comparison with direct addition of ceramic (SiC, Si₃N₄) phases, in situ formation shows several appealing features. By inducing the reaction of silicon with MCMB, the sintering ability of the composite is enhanced via reaction bonding mechanisms. Similarly, it is demonstrated that composite porosity is limited owing to silicon reaction with nitrogen. The reactive formation of nanoscale ceramic reinforcements via decomposition of the silicon-containing polymer (e.g. poly-carbomethyl-silane) is also reported. This approach results in formation of uniform nanosized (>100 nm) SiC layers strongly bonded to the surface of the carbon particles. The presented results contribute to the development of carbon-ceramic materials with high-operational properties.     

Lipase-catalyzed synthesis and properties of estolides and their esters

Eight lipases were screened for their ability to synthesize estolides from a mixture that contained lesquerolic (14-hydroxy-11-eicosenoic) acid and octadecenoic acid. With the exception ofAspergillus niger lipase, all 1,3-specific enzymes (fromRhizopus arrhizus andRhizomucor miehei lipases) were unable to synthesize estolides.Candida rugosa andGeotrichum lipases catalyzed estolide formation at >40% yield, with >80% of the estolide formed being monoestolide from one lesquerolic and one octadecenoic acyl group:Pseudomonas sp. lipase synthesized estolides at 62% yield, but the product mixture contained significant amounts of monoestolide with two lesquerolic acyl groups as well as diestolide. ImmobilizedR. miehei lipase was chosen to catalyze the esterification of mono-and polyestolide, derived synthetically from oleic acid, with fatty alcohols or α,ω-diols. Yields were >95% for fatty alcohol reactions and >60% for diol reactions. In addition, the estolide linkage remained intact through the course of the esterification process. Esterification of estolides improved the estolide’s properties—for example, lower viscosity and higher viscosity index—but slightly raised the melting point. Estolides and, particularly, estolide esters may be suitable as lubricants or lubricant additives.     

X-ray Photoelectron Spectroscopy of Cadmium Tin Oxide Ceramics in As-Fired and Electrochemically Reduced Forms

X-ray photoelectron spectroscopy (XPS) has been employed to investigate the chemical nature of samples of dicadmium stannate (Cd₂SnO₄) in the as-fired, electrochemically reduced, and reoxidized states. The reduction of Cd₂SnO₄ was found to be associated with a dramatic color change from bright yellow to dark green, a phenomenon commonly known as the electrochromic effect. Both quantitative XPS results and binding energy measurements proved that, upon exposure of the reduced ceramic bodies to air, the Sn²⁺ to Sn⁴⁺ transition readily took place to produce the intermediate compound, Cd₂SnO₃ with divalent tin. Prolonged exposure to the atmosphere did not result in further progress of reoxidation extending to monovalent cadmium. However, complete reoxidation of the reduced samples was possible by annealing in air at 350°C for a short period of time, e.g., 3 h, by which the original features of the as-fired state such as color and electrical conductivity were restored. The results also showed that reoxidized samples at high temperature assume the same XPS characteristics as those of as-fired ceramics.     

Semiochemicals and Social Signaling in the Wild European Rabbit in Australia: I. Scent Profiles of Chin Gland Secretion from the Field

The European rabbit (Oryctolagus cuniculus) uses the secretion of the chin gland in the maintenance of social status. Previous work has concentrated on secretion collected directly from the animal. In this study, the analysis was conducted by collecting scent marks made by free-ranging animals. Scent marks were found to be concentrated at the center of the area controlled by a social group, and at the boundaries between two adjacent social groups. Only the mark from dominant animals could be identified. Marks were also collected from the skin of rabbits, where they had been placed by the dominant individual. The mark found on the head of a subordinate animal may, in the future, be used to identify the dominant animal of the social group, who placed the mark.     

Unifying Functional User Interface Design Principles

ABSTRACT

Many designers and User Interface (UI) educators discuss principles to be followed when designing the functional aspects of a UI. However, many UI principles have been proposed, scattered in scientific papers and teaching books. Some principles are different, and many are somehow similar or overlapping with others. This makes it very difficult to comprehend where to pay attention to when designing a UI. In this paper, we perform a systematic literature review to first identify the most relevant authors in the domain of functional UI design principles. Focusing on the three most cited works of these authors, we extracted 257 principles. We next analyzed all these principles, unified their variants, and, considering their scientific influence, finally derived a shorter and core selection of 36 principles. This core selection provides educators and UI designers with a clear path to teach, evaluate, learn and improve the UI functional design.     

Single-channel EEG measurement of engagement in virtual rehabilitation: a validation study

Virtual Reality - Stroke rehabilitation suffers from low levels of patient engagement, impeding recovery. Virtual rehabilitation (VR) approaches can improve patient outcomes; however, there is...     

The challenge of predicting spinnability: Investigating benefits of adding lignin to cellulose solutions in air-gap spinning

In this study, the underlying mechanism for improved spinnability when mixing lignin and cellulose in solution was investigated. Co-processing of lignin and cellulose has previously been identified as a potential route for production of inexpensive and bio-based carbon fibers. The molecular order of cellulose contributes to the strength of the fibers and the high carbon content of lignin improves the yield during conversion to carbon fibers. The current work presents an additional benefit of combining lignin and cellulose; solutions that contain both lignin and cellulose could be air-gap spun at substantially higher draw ratios than pure cellulose solutions, that is, lignin improved the spinnability. Fibers were spun from solutions containing different ratios of lignin, from 0 to 70 wt%, and the critical draw ratio was determined at various temperatures of solution. The observations were followed by characterization of the solutions with shear and elongational viscosity and surface tension, but none of these methods could explain the beneficial effect of lignin on the spinnability. However, by measuring the take-up force it was found that lignin seems to stabilize against diameter fluctuations during spinning, and plausible explanations are discussed.     

An investigation of phase transformation behavior in sputter-deposited PtMn thin films

Sputter-deposited, equiatomic PtMn thin films have application in giant magnetoresistive spin valves, tunneling magnetoresistive spin valves, and magnetic random access memory. However, the as-deposited films are found to be a disordered A1 phase in a paramagnetic state rather than an antiferromagnetic phase with L1₀ structure, which is needed for device operation. Therefore, a postannealing step is required to induce the phase transformation from the asdeposited A1 face-centered-cubic phase to the antiferromagnetic L1₀ phase. The A1 to L1₀ metastable transformation was studied by x-ray diffraction and differential-scanning calorimetry. An exothermic transformation enthalpy of −12.1 kJ/mol of atoms was determined. The transformation kinetics were simulated using the Johnson-Mehl-Avrami analysis.