Design and Architecture of Low‐Latency High‐Speed Turbo Decoders

In this paper, we propose and present implementation results of a high‐speed turbo decoding algorithm. The latency caused by (de)interleaving and iterative decoding in a conventional maximum a posteriori turbo decoder can be dramatically reduced with the proposed design. The source of the latency reduction is from the combination of the radix‐4, center to top, parallel decoding, and early‐stop algorithms. This reduced latency enables the use of the turbo decoder as a forward error correction scheme in real‐time wireless communication services. The proposed scheme results in a slight degradation in bit error rate performance for large block sizes because the effective interleaver size in a radix‐4 implementation is reduced to half, relative to the conventional method. To prove the latency reduction, we implemented the proposed scheme on a field‐programmable gate array and compared its decoding speed with that of a conventional decoder. The results show an improvement of at least five fold for a single iteration of turbo decoding.     

Does Multitasking Increase or Decrease Persuasion? Effects of Multitasking on Comprehension and Counterarguing

This study examined the effects of multitasking on persuasion, including comprehension and counterarguing of persuasive messages, which were presented in three different contexts: (a) nonmultitasking with full attention paid to the message, (b) multitasking with primary attention paid to the message, and (c) multitasking with secondary attention paid to the message. Consistent with predictions, the results suggested that multitasking reduced the actual and perceived levels of comprehension and also reduced counterarguing. The implications for research on persuasion are further discussed.     

A Video Streaming System for Mobile Phones: Practice and Experience

This paper presents a case of video streaming system for mobile phone which has actually been implemented and deployed for commercial services in CDMA2000 1X cellular phone networks. As the computing environment and the network connection of cellular phones are significantly different from the wired desktop environment, the traditional desktop streaming method is not applicable. Therefore, a new architecture is required to suit the successfully streaming in the mobile phone environment. We have developed a very lightweight video player for use in mobile phone and the related authoring tool for the player. The streaming server has carefully been designed to provide high efficiency, reliability and scalability. Based on a specifically-designed suite of streaming protocol, the server employs an adaptive rate control mechanism which transmits the media packets appropriately into the network according to the change in network bandwidth.Hojung Cha is currently a professor in computer science at Yonsei University, Seoul, Korea. His research interests include multimedia computing system, multimedia communication networks, wireless and mobile communication systems and embedded system software. He received his B.S. and M.S. in computer engineering from Seoul National University, Korea, in 1985 and 1987, respectively. He received his Ph.D. in computer science from the University of Manchester, England, in 1991.Jongmin Lee is a Ph.D. candidiate in computer science at Yonsei University, Seoul, Korea. His research interests include wireless multimedia system, QoS architecture, multimedia communication networks. He received his B.S. and M.S. in computer science from Kwangwoon University in 1999 and 2001, respectively.Jongho Nang is a professor in the Department of Computer Science at Sogang University. He received his B.S. degree from Sogang University, Korea, in 1986 and M.S. and Ph.D. degree from KAIST, in 1988 and in 1992, respectively. His research interests are in the field of multimedia systems, digital video library, and Internet technologies. He is a member of KISS, ACM, and IEEE.Sung-Yong Park is an associate professor in the Department of Computer Science at Sogang University, Seoul, Korea. He received his B.S. degree in computer science from Sogang University, and both the M.S. and Ph.D. degrees in computer science from Syracuse University. From 1987 to 1992, he worked for LG Electronics, Korea, as a research engineer. From 1998 to 1999, he was a research scientist at Telcordia Technologies (formerly Bellcore) where he developed network management software for optical switches. His research interests include high performance distributed computing and systems, operating systems, and multimedia.Jin-Hwan Jeong received the B.S. and M.S. degrees in computer science from Korea University, Seoul, Korea, in 1997, and 1999, respectively. He is currently in Ph.D. course at Korea University. His research interests include video processing for thin devices, multimedia streaming and operating systems.Chuck Yoo received the B.S. degree in electronics engineering from Seoul National University, Seoul, Korea and the M.S. and Ph.D. in computer science in University of Michigan. He worked as a researcher in Sun Microsystems Lab. from 1990 to 1995. He joined the Computer Science and Enginnering Department, Korea University, Seoul, Korea in 1995, where he is currently a professor. His research interests include high performance network, multimedia streaming, and operating systems.Jin-Young Choi received the B.S. degree from Seoul National University, Seoul, Korea, in 1982, the M.S. degree from Drexel University in 1986, and the Ph.D. degree from University of Pennsylvania, in 1993. He is currently a professor of Computer Science and Engineering Department, Korea University, Seoul, Korea. His current research interests are in real-time computing, formal methods, programming languages, process algebras, security, software engineering, and protocol engineering.     

Photomultiplication-Type Organic Photodetectors with High EQE-Bandwidth Product by Introducing a Perovskite Quantum Dot Interlayer

A photomultiplication (PM)-type organic photodetector (OPD) that exploits the ionic motion in CsPbI₃ perovskite quantum dots (QDs) is demonstrated. The device uses a QD monolayer as a PM-inducing interlayer and a donor–acceptor bulk heterojunction (BHJ) layer as a photoactive layer. When the device is illuminated, negative ions in the CsPbI₃ QD migrate and accumulate near the interface between the QDs and the electrode; these processes induce hole injection from the electrode and yield the PM phenomenon with an external quantum efficiency (EQE) >2000% at a 3 V applied bias. It is confirmed that the ionic motion of the CsPbI₃ QDs can induce a shift in the work function of the QD/electrode interface and that the dynamics of ionic motion determines the response speed of the device. The PM OPD showed a large EQE-bandwidth product >10⁶ Hz with a −3 dB frequency of 125 kHz at 3 V, which is one of the highest response speeds reported for a PM OPD. The PM-inducing strategy that exploits ionic motion of the interlayer is a potential approach to achieving high-efficiency PM OPDs.     

An Approach for Segmentation of Airborne Laser Point Clouds Utilizing Scan‐Line Characteristics

In this study, we suggest a new segmentation algorithm for processing airborne laser point cloud data which is more memory efficient and faster than previous approaches. The main principle is the reading of data points along a scan line and their direct classification into homogeneous groups as a single process. The results of our experiments demonstrate that the algorithm runs faster and is more memory efficient than previous approaches. Moreover, the segmentation accuracy is generally acceptable.     

Relations among Security Models for Authenticated Key Exchange

Usually, key‐establishment protocols are suggested in a security model. However, there exist several different security models in the literature defined by their respective security notions. In this paper, we study the relations between the security models of key establishment. For the chosen security models, we first show that some proven key‐establishment protocols are not secure in the more restricted security models. We then suggest two compilers by which we can convert a key‐establishment protocol that is secure in a specific security model into a key‐establishment protocol that is still secure in a more restricted security model.     

Large-Scale Synthesis of Graphene Films by Joule-Heating-Induced Chemical Vapor Deposition

We report large-area synthesis of few-layer graphene films by chemical vapor deposition (CVD) in a cold-wall reactor. The key feature of this method is that the catalytic metal layers on the SiO₂/Si substrates are self-heated to high growth temperature (900°C to 1000°C) by high-current Joule heating. Synthesis of high-quality graphene films, whose structural and electrical characteristics are comparable to those grown by hot-wall CVD systems, was confirmed by transmission electron microscopy images, Raman spectra, and current–voltage analysis. Optical transmittance spectra of the graphene films allowed us to estimate the number of graphene layers, which revealed that high-temperature exposure of Ni thin layers to a carbon precursor (CH₄) was critical in determining the number of graphene layers. In particular, exposure to CH₄ for 20 s produces very thin graphene films with an optical transmittance of 93%, corresponding to an average layer number of three and a sheet resistance of ~600 Ω/square.     

Growth of tin whiskers for lead-free plated leadframe packages in high humid environments and during thermal cycling

Growth behavior of tin whiskers from pure tin and tin–bismuth plated leadframe (LF) packages for elevated temperature and high humidity storages and during thermal cycling was observed. In the storage at 60 °C/93% relative humidity (RH) and 85 °C/85%RH the galvanic corrosion occurred at the outer lead toes and shoulders where the base LF material is exposed, forming tin oxide layers of SnO₂. The corroded layers spread inside the film and formed whiskers around the corroded islands. Many whiskers were observed to grow from grain boundaries for the Fe–42Ni alloy (alloy42) LF packages. It was confirmed that the corrosion tends to occur on the side surfaces of outer leads adjacent to the mold flash. The contribution of ionic contaminants in epoxy mold compound (EMC) to the corrosion was not identified. During thermal cycling between −65 °C and +150 °C whiskers grew out of as-deposited grains for pure tin-plated alloy42 LF packages and they grew linearly with an increase of number of cycle. Growth mechanisms of the whiskers from grain boundaries and as-deposited grains were discussed from the deformation mechanism map for tin and mathematical calculation with a steady-state diffusion model.     

Significantly Enhanced Photoluminescence of Doped Polymer‐Metal Hybrid Nanotubes

We report on the significantly enhanced photoluminescence (PL) of hybrid double‐layered nanotubes (HDLNTs) consisting of poly(3‐methylthiophene) (P3MT) nanotubes with various doping levels enveloped by an inorganic, nickel (Ni) metal nanotube. From laser confocal microscopy PL experiments on a single strand of the doped‐P3MT nanotubes and of their HDLNTs, the PL peak intensity of the HDLNT systems increased remarkably up to ～350 times as the doping level of the P3MT nanotubes of the HDLNTs increased, which was confirmed by measurements of the quantum yield. In a comparison of the normalized ultraviolet and visible absorption spectra of the doped‐P3MT nanotubes and their HDLNTs, new absorption peaks corresponding to surface‐plasmon (SP) energy were created at 563 and 615 nm after the nanoscale Ni metal coating onto the P3MT nanotubes, and their intensity increased on increasing the doping level of the P3MT nanotube. The doping‐induced bipolaron peaks of the HDLNTs of doped‐P3MT/Ni were relatively reduced, compared with those of the doped‐P3MT nanotubes before the Ni coating, due to the charge‐transfer effect in the SP‐resonance (SPR) coupling. Both energy‐transfer and charge‐transfer effects due to SP resonance contributed to the very‐large enhancement of the PL efficiency of the doped‐P3MT‐based HDLNTs.     

Strain‐Visualization with Ultrasensitive Nanoscale Crack‐Based Sensor Assembled with Hierarchical Thermochromic Membrane

As eidetic signal recognition has become important, displaying mechanical signals visually has imposed huge demands for simple readability and without complex signal processing. Such visualization of mechanical signals is used in delicate urgent medical or safety‐related industries. Accordingly, chromic materials are considered to facilitate visualization with multiple colors and simple process. However, the response and recovery time is very long, such that rapid regular signals are unable to be detected, i.e., physiological signals, such as respiration. Here, the simple visualization of low strain ≈2%, with ultrasensitive crack‐based strain sensors with a hierarchical thermochromic layer is suggested. The sensor shows a gradient color change from red to white color in each strain, which is attributed to the hierarchical property, and the thermal response (recovery) time is dramatically minimized within 0.6 s from 45 to 37 °C, as the hierarchical membrane is inspired by termite mounds for efficient thermal management. The fast recovery property can be taken advantage of in medical fields, such as monitoring regular respiration, and the color changes can be delicately monitored with high accuracy by software on a mobile phone.