W-band divide-by-3 frequency divider using 0.1 /spl mu/m InAlAs/InGaAs metamorphic HEMT technology

A W-band divide-by-3 frequency divider with wide bandwidth and low power dissipation is presented using harmonic injection-locking technique. A cascode FET is employed for a self-oscillating second-harmonic mixer which is injection-locked by third-harmonic input to obtain the division order of three. The fabricated frequency divider using 0.1 /spl mu/m GaAs metamorphic HEMT technology shows superior performance such as large bandwidth of 6.1 GHz around 83.1 GHz (7.3%) under small DC power consumption of 12 mW.     

Novel configurations of planar multilayer magic-T usingmicrostrip-slotline transitions

Novel configurations of microwave planar magic-T suitable for microwave integrated circuits (MICs) and monolithic MICs are described. They consist of microstrip and slotline T-junctions coupled by microstrip-slotline transitions. Since via-hole processing is not encountered, they are especially applicable to multilayer MICs. Derived equivalent network models are used efficiently for the design of the corresponding multilayer microstrip magic-T. Measured data and numerical simulations showing good amplitude and phase characteristics over an octave operating bandwidth validate the proposed configurations of planar magic-T     

Fully Programmable Memory BIST for Commodity DRAMs

To accomplish a high‐speed test on low‐speed automatic test equipment (ATE), a new instruction‐based fully programmable memory built‐in self‐test (BIST) is proposed. The proposed memory BIST generates a high‐speed internal clock signal by multiplying an external low‐speed clock signal from an ATE by a clock multiplier embedded in a DRAM. For maximum programmability and small area overhead, the proposed memory BIST stores the unique sets of instructions and corresponding test sequences that are implicit within the test algorithms that it receives from an external ATE. The proposed memory BIST is managed by an external ATE on‐the‐fly to perform complicated and hard‐to‐implement functions, such as loop operations and refresh‐interrupts. Therefore, the proposed memory BIST has a simple hardware structure compared to conventional memory BIST schemes. The proposed memory BIST is a practical test solution for reducing the overall test cost for the mass production of commodity DDRx SDRAMs.     

An Architecture of Scalable ATM Switching System and Its Call Processing Capacity Estimation

In this paper, we define the general requirements of ATM switching systems such as scalability, distributed fashion, and modularity. Also we propose a practical implementation of a scalable ATM switching system whose capacity can be easily expanded. Firstly, the architecture of the system is discussed with an emphasis on system scalability, modularity of subsystems and the simple control network of the design requirements. Secondly, we suggest the three types of distributed call/connection control schemes that are suitable for our switching system. We also estimate their call processing capacity on the average and make a comparison of them under the various system architectures. Since our scalable switching system can be constructed to perform the call processing functions on the various levels of the system capacity, it has much adaptability at the various evolution phases or regions of the network environment.     

Absorption of NOx in packed column (II)

An absorption efficiency of packed column removing nitrogen oxides with water and NaOH solution under atmospheric pressure was studied. The efficiency and the acidity produced by absorption of NO, were measured in a packed column. The model developed that was based on the mass-transfer information for packed column and absorption mechanism accompanying the chemical reaction was compared with experimental results. Predictions using the model presented by the previous paper (part 1) was shown well to agree with from the experimental results (part II). The efficiency of NO_x, absorption is largely dependent on the height of packing material and the partial pressure of NO_x in the feed gas. The efficiency of NO_x absorption decreases with the increase of the acidity produced by recycling of water as a scrubber liquid. For the recycle mode with an aqueous NaOH solution as a scrubber liquid, NO_x absorption efficiency is shown to be constant until all of the C_OH- in the scrubber liquid are converted into C_H+.     

Fatty chain compositon of ether and ester glycerophospholipids in the Japanese oysterCrassostrea gigas (Thunberg)

The fatty chain compositions of 1-O-alk-1′-enyl-2-acyl, 1-0-alkyl-2-acyl, and 1,2-diacyl glycerophospholipids of the Japanese oysterCrassostrea gigas (Thunberg) were investigated. Major fatty chains in thesn-1 position of 1-alk-1′-enyl-2-acyl ethanolamine phospholipids (EPL) were 18∶0 (64.7%) and 20∶1 (11.1%). Majorsn-1 chains of alkenylacyl choline phospholipids (CPL) were 18∶0 (63.3%) and 16∶0 (22.2%). In the case of 1-alkyl-2-acyl EPL, the predominant fatty chains in thesn-1 position were 18∶0 (51.5%), 16∶0 (16.0%) and 20∶1 (12.5%); in the case of 1-alkyl-2-acyl CPL, the majorsn-1 chains were 16∶0 (44.0%) and 14∶0 (23.4%). Saturated fatty chains were predominant in both EPL and CPL. Prominent fatty acids in thesn-2 position of the alkenylacyl EPL were 22∶6n−3 (29.0%), 20∶5n−3 (19.0%) and 22∶2 NMID (non-methylene interrupted dienes, 16.6%) contributing to about 65% of the total fatty acids, while alkenylacyl CPL was rich in the saturated acids 16∶0 (32.0%) and 18∶0 (9.2%). In the alkylacyl EPL, 16∶0, 18∶1n−9, 18∶0 and 16∶1n−7 were prominentsn-2 fatty acids and accounted for 30.6%, 10.0%, 9.8%, and 8.3%, respectively. Polyunsaturated fatty acids were detected, but were present at extremely low percentages. Majorsn-2 fatty acids in alkylacyl CPL were 16∶0 (25.4%), 22∶6n−3 (16.0%) and 20∶5n−3 (8.4%). The major fatty acids of diacyl EPL were 20∶5n−3 (22.3%), 16∶0 (17.9%), and 18∶0 (16.1%), and those of diacyl CPL were 16∶0 (30.4%), 20∶5n−3 (17.6%) and 18∶1n−7 (7.4%).     

Binary blends of nylons with ethylene vinyl alcohol copolymers: Morphological,thermal, rheological,and mechanical behavior

Binary blends of ethylene vinyl alcohol copolymers, containing 62 (EVOH-62) and 71 (EVOH-71) mole percent vinyl alcohols, with nylons (nylon-6, nylon-6/12, and nylon-12) have been prepared from melt mixing in a twin screw compounding machine. Morphological, thermal, rheological, and mechanical properties were determined. EVOH-62/nylon-6 and EVOH-71/nylon-6 blends showed homogeneous phase morphologies in the nylon-6-rich region, and fine phase separations (c.a. 2 × 10^?7 m) in the EVOH-rich region. Melting point depression, positive deviations in viscosity and flexural modulus, and negative deviation in impact strength from the simple additive rule were generally observed. And the results were possibly interpreted in terms of compatibility and increased nylon/EVOH interactions over the nylon/nylon interactions. On the contrary, clean phase separations in large domains were observed from EVOH-71/nylon-6/12 and EVOH-71 /nylon-12 blends. Fibrillation was also obtained from EVOH rich blends. Probably due to the incompatible nature of these blends, yield at low rate of shear and a mechanical property drop were also observed.     

Streaming Media and Multimedia Conferencing Traffic Analysis Using Payload Examination

This paper presents a method and architecture to analyze streaming media and multimedia conferencing traffic. Our method is based on detecting the transport protocol and port numbers that are dynamically assigned during the setup between communicating parties. We then apply such information to analyze traffic generated by the most popular streaming media and multimedia conferencing applications, namely, Windows Media, Real Networks, QuickTime, SIP and H.323. We also describe a prototype implementation of a traffic monitoring and analysis system that uses our method and architecture.