The Effect of Implanted Al and/or Y on the Scale Formation on Low-Al Fe20Cr2Al Alloy

The very early stages of the oxidation of an Fe20Cr2Al alloy, unmodified and ion-implanted by aluminium, yttrium and a combination of both elements, Al and Y, were studied at 1100 °C in oxygen using two-stage-oxidation exposures with ¹⁸O₂ as a tracer and subsequent characterisation of the scales using SIMS analyses of distribution of oxygen isotopes and oxide-related negative ion clusters, SEM observations of the surface morphology and photoluminescence spectroscopy analysis of the phase composition. The scales formed in all cases, except for the Al-implanted alloy, exhibited layered structures, with the outer part comprising Fe- and Cr-rich oxide, and the inner part being Al₂O₃, which grew due to a mixed outward–inward mechanism . The alumina sub-layers contained the transient oxides and α-Al₂O₃. Implanted Al significantly affected the mechanism of the scale growth, providing that the scale consisted essentially of α-Al₂O₃, and grew via a mixed inward-outward mechanism typical for scales on alumina formers.     

Production of hydrogen via methane reforming using atmospheric pressure microwave plasma

In this paper, results of hydrogen production via methane reforming in the atmospheric pressure microwave plasma are presented. A waveguide-based nozzleless cylinder-type microwave plasma source (MPS) was used to convert methane into hydrogen. Important advantages of the presented waveguide-based nozzleless cylinder-type MPS are: stable operation in various gases (including air) at high flow rates, no need for a cooling system, and impedance matching. The plasma generation was stabilized by an additional swirled nitrogen flow (50 or 100 l min⁻¹). The methane flow rate was up to 175 l min⁻¹. The absorbed microwave power could be changed from 3000 to 5000 W. The hydrogen production rate and the corresponding energy efficiency in the presented methane reforming by the waveguide-based nozzleless cylinder-type MPS were up to 255 g[H₂] h⁻¹ and 85 g[H₂] kWh⁻¹, respectively. These parameters are better than those typical of the conventional methods of hydrogen production (steam reforming of methane and water electrolysis).     

Confidence intervals in repeated-measures designs: The number of observations principle.

Since the publication of Loftus and Masson’s (1994) method for computing confidence intervals (CIs) in repeated-measures (RM) designs, there has been uncertainty about how to apply it to particular effects in complex factorial designs. Masson and Loftus (2003) proposed that RM CIs for factorial designs be based on number of observations rather than number of participants. However, determining the correct number of observations for a particular effect can be complicated, given the variety of effects occurring in factorial designs. In this paper the authors define a general “number of observations” principle, explain why it obtains, and provide step-by-step instructions for constructing CIs for various effect types. The authors illustrate these procedures with numerical examples. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Properties of pore structure of thin-layer external plasters under ageing in simulated environment

The basic and commonly used four types of thin-layer facade plasters on cement and silicate binders were subjected to 400 cycles of accelerated ageing in the simulate chamber. The main attention was focused on the character of pore structure evolution during of ageing process. To reach this objective, examinations of the microstructure by the mercury intrusion method and total porosity by the densitometry method were carried out in time per 100 cycles. During the study, the main emphasis was put on the open porosity and changes of dimensional groups of pores. On the ground of the hysteresis of the mercury pressure by mercury intrusion porosimetry testing, the presence of pores with capillary entrance was suggested. In view of this, the cylindrical and spherical model of porous structure has been defined. The contribution of capillary and spherical pores vary in time together with properties such as: average pore radius, length of cylindrical pores and their tortuosity. The changes of these values confirm that atmospherical ageing influences plasters’ binders in two zones. It appears on the one hand by the decrease of total porosity, length and diameter of capillaries but on the other hand by the increase of open porosity and the decrease of pores’ tortuosity. It indicates the tightening character of the inside pore structure of the examined plasters and at the same time it gives diverse effect in its external zone.     

Hydroprocesssing of light gas oil — rape oil mixtures

Two series of experiments of hydroprocessing of light gas oil - rape oil mixtures were carried out. The reactor feed was composed of raw material: first series — 10 wt.% rape oil and 90 wt.% of diesel oil; second series — 20 wt.% rape oil and 80 wt.% of diesel oil.     

Synthesis and surface activity of nonionic surfactants containing fluorocarbon hydrophobes

Nonionic surfactants having polydisperse polyoxyethylene chains and highly fluorinated hydrophobes were synthesized via a complex reaction route and their adsorption at water/air interfaces studied. They exhibit high surface activity and decrease both effectively and efficiently the surface tension of their aqueous solutions. The effect of the length of the polyoxyethylene chain upon surfactant surface activity is relatively low. Lower values of surface tension, below 30 mN m^?1, are obtained for surfactants having a low degree of ethoxylation. Surfactants having two terminal highly fluorinated hydrophobes are less surface active than analogues with one terminal hydrophobe.     

Cross section measurements of the 23Na(n, 2n)22Na, 58Ni(n, 2n)57Ni and 115In(n,n′)115mIn reactions

Cross sections for two high energy threshold reactions ²³Na(n, 2n)²²Na and ⁵⁸Ni(n, 2n)⁵⁷Ni were measured by the activation method in the neutron energy range from 14 to 18 MeV. Inelastic scattering cross section for ¹¹⁵In was measured in the threshold region, i.e. from 0.5 to 1.3 MeV. The results of measurements are compared with scarce and divergent earlier data.     

AdROSA—Adaptive personalization of web advertising

One of the greatest and most recent challenges for online advertising is the use of adaptive personalization at the same time that the Internet continues to grow as a global market. Most existing solutions to online advertising placement are based on demographic targeting or on information gained directly from the user. The AdROSA system for automatic web banner personalization, which integrates web usage and content mining techniques to reduce user input and to respect users’ privacy, is presented in the paper. Furthermore, certain advertising policies, important factors for both publishers and advertisers, are taken into consideration. The integration of all the relevant information is accomplished in one vector space to enable online and fully personalized advertising.