一种实时心电图数据压缩算法

提出了一种实时心电图ＥＣＧ数据压缩算法。它是将自适应变门限算法与转折点算法相结合。自适应变门限算法是对ＡＺＴＥＣ算法的改进．它计算ＥＣＧ信号的几个统计参数来确定可变门限值。转折点算法是分析采样点的趋势并只存储每对连续的采样点中的一个。它保留信号的斜坡标志发生变化的峰点和谷点。本文算法兼有这两种算法的优点。这种算法在较高压缩比的情况下重建心电图信号失真较小．     

硫化铜矿中提取铜的新方法研究

对从硫化铜矿中提取铜的溶剂进行了详细研究，提出了“过硫酸铵－氨水－Ａｇ￣＋”催化、氧化、络合的提取法。     

混合Hermite-Lagrange插值之同时逼近

对于(-1,1)中的结点组{X_k}_(k=1)~n,记l_k(x)为相应的Lagrange插值基本多项式,又记A_n=‖∑(2-x~2-x_k~2)(1-x_k~2)~-1丨l_k(x)‖。对于f∈C_([-1,1)~q与r=[q+2/2],本文证明满足条件H_n(f,x_k)=f(x_k)(k=1,2,…,n),H_n~(s)(f,±1)=f~(s)(±1)(s=0,1,…,n-1)的n+2r-1次代数多项式H_n(f,x)有逼近性质H_n~(s)(f,x)-f~(s)(x)=(?)其中δ_n(x)=n~(-1)(1-x~2)~(1/2),△_n(x)=δ_n(x)+n~(-2).作为证明的重要工具,本文还对n次代数多项式P_n(x),建立了另一形式的Bernstein不等武:若 P_n(x)=O(1)δ_n~q(x)ω(δ_n(x)),则p_n~(S)(X)=O(1)δ_n~(q-2S)(X)ω(δ_n(X))△_n~s(X)。     

A novel cyclic process using CaSO<Subscript>4</Subscript>/CaS pellets for converting sulfur dioxide to elemental sulfur without generating secondary pollutants: Part I. Feasibility and kinetics of the reduction of sulfur dioxide with calcium-sulfide pellets

Certain new sulfide-smelting processes and coal-gasification processes generate high-strength sulfur dioxide streams, for which a new process for converting sulfur dioxide to elemental sulfur needs to be developed because no process exists that is generally and economically applicable to the treatment of such streams. A thermodynamic and experimental investigation to develop a new process for converting sulfur dioxide to elemental sulfur by a cyclic process involving calcium sulfide and calcium sulfate without generating secondary pollutants was carried out. In this process, the starting raw material, calcium sulfate, is reduced by a suitable reducing agent, such as hydrogen, to produce calcium sulfide, which is used to reduce sulfur dioxide to elemental sulfur vapor and calcium sulfate. The latter is, in turn, reduced to regenerate calcium sulfide. In this Part I, detailed experimental results are presented on the kinetics of the reaction between sulfur dioxide and calcium-sulfide pellets, which produces elemental sulfur and calcium sulfate. The experiments were carried out at temperatures between 1023 and 1088 K and sulfur-dioxide partial pressures between 9 and 60 kPa by the use of a thermogravimetric analysis (TGA) technique. The rate of this reaction was demonstrated by the conversion of 40 pct calcium-sulfide pellets obtained from the hydrogen reduction of fresh calcium sulfate in 10 minutes at 1073 K under a sulfur-dioxide partial pressure of 43 kPa. The reactivity decreased somewhat during the first three cycles but remained largely unchanged thereafter up to the tenth cycle. This characteristic of the pellets is important because the solids must be reusable for repeated cycles to avoid generating secondary pollutants. A pore-blocking model was found to fit the reaction rate. The reaction is first order with respect to sulfur-dioxide partial pressure and has an activation energy of 101 to 134 kJ/mol (24 to 32 kcal/mol) for calcium-sulfide pellets reacted and regenerated several different times. Sulfur dioxide-containing streams from certain sources, such as the regenerator off-gas from an integrated-gasification, combined-cycle, desulfurization unit and new sulfide-smelting plants, contain much higher partial pressures of SO₂. In these cases, the rate of the first reaction is expected to be proportionally higher than in the test conditions reported in this article. The reduction kinetics of calcium-sulfate pellets with hydrogen gas is reported in the accompanying Part II.     

电动潜油泵多功能自动控制测试系统

为了提高电潜泵产品质量 ,延长电潜泵井的检泵周期 ,研制了电动潜油泵多功能自动控制测试系统。该系统由自动控制、参数测试、管线流程及电气控制 4部分组成 ,既能对电潜泵机组进行全面检测 ,又能对测试数据进行管理和跟踪 ,具有测试参数齐全、速度快、精度高、操作容易、安全性强、智能化程度高、测量范围广、容量大等特点 ,并在计算机自动调节井口压力、测试电动机转矩以及测控回路与计算机分离等方面具有创新。该系统能够模拟现场工况完成各种型号的电潜泵的测试 ,为电潜泵的理论设计及现场应用提供可靠的试验数据。     

基于过程能量综合优化的延迟焦化装置扩大生产能力改造策略

根据延迟焦化流程的特点，分析了延迟焦化装置扩大生产能力的瓶颈，探讨了基于能量综合优化的装置扩能解除瓶颈的策略方法，基于过程能量综合优化，运用流程模拟技术，通过配套的加热炉优化，分馏塔操作优化，换热网络柔性设计等手段，实现了装置扩大生产能力的目的，并运用所提出的策略对某延迟焦化装置进行了基于能量系统优化的扩能改造，在原流程与设备的基础上，装置处理量增大18．2％，装置物耗，能耗大幅度降低，改造设备投资少，说明能量综合优化对工艺装置扩能改造具有重要意义。     

Skeletal Isomerization and Inter—molecular Hydrogen Transfer Reactions in Catalytic Cracking

Bimolecular hydrogen transfer and skeletal isomerization the important secondary reac-tions among catalytic cracking reactions,which affect product yield distribution and product quality,Catalyst properties and operating parameters have great impact on bimolecular hydrogen transfer and skeletal isomerization reactions .Bimolecular hydrogen transfer activity and skeletal isomrization activity of USY-containing catalysts are higher thn that of ZSM-5-containing catalyst.Coke deposition on the active sites of catalyst may suppress bimolecular hydrogen transfer activity and skeletal isomer-ization activity of catlys in different degrees.Short raction time causes a decrease of hydrogen trans-fer reaction,but and increase of skeletal isomerization reaction compared to cracking reaction in catalytic cracking process.     

Microbiological denitrification of red beet juice

The purpose of study was the determination of optimal conditions for red beet juice denitrification by Paracoccus denitrificans bacteria as well as the evaluation of the usefulness of microbiologically treated juice for the production of a natural colouring preparation for foods. Total reduction of nitrates was found during bacterial culturing at 25 and 30 °C, at an initial pH of 7.0-8.0 and juice osmotic pressure of 900-1100 mOsm/kg. Microbiological denitrification procedure affected colour, taste and aroma of the juice. However, the use of juice as food colouring and component was made feasible by acidification and partial evaporation of water together with volatile substances.     

A comparison between different PMD compensation techniques

We quantify the benefits of using different techniques for compensation of polarization mode dispersion (PMD) in fiber-optic communication systems by means of numerical simulations. This is done both with respect to PMD-induced pulse broadening and in terms of system outage probability for different data formats [nonreturn-to-zero (NRZ) and return-to-zero (RZ)]. Attention is focused on simple and relevant single- and double-stage post-transmission compensators with a few degrees of freedom (DOF). It is generally believed that a PMD compensator with a polarization controller and a variable delay line can only compensate the PMD to the first order. We show, from analytical results, the counterintuitive fact that this scheme can also partially compensate for higher order PMD. We also investigate the benefit of using a polarizer as compensation element where the optical average power can be used as a feedback signal