Study on esterification of acrylic phenolic resin by maleic anhydride and photocrosslinking properties of the alkali‐soluble product

An alkali‐soluble, photocrosslinkable polymer was synthesized by esterification of OH groups of acrylic phenolic resin with maleic anhydride. The OH groups were formed by the ring‐opening reaction of epoxy groups of epoxy phenolic resin with acrylic acid. The esterification conditions were studied. The results showed that it is better to use tetramethyl ammonium bromide as catalyst than N,N‐dimethylbenzylamine. The conversion of maleic anhydride in acetone can reach about 80% at 56°C for 4 h. The purified product was characterized by IR, DSC, and TGA. The product containing acrylate and maleic acid monoester groups, above a certain content, can be dissolved in 1% Na₂CO₃ solution. The photocrosslinkable properties of the product were investigated through selection of photoinitiator, accelarator, crosslinkable diluent monomer, etc. The acrylate and maleic acid monoester group‐containing phenolic resin exhibited very good photocrosslinking behavior, since it contains double bonds from both acrylate groups and maleic acid monoester groups. The activity of photoinitiator decreases in the order: isopropylthioanthraquinone > benzoin ethyl ether (BE) > anthraquinone (AQ) > benzophenone > Michel ketone (MK) > 2,2‐diethoxyacetophenone. The combination of some photoinitiators showed synergistic effects. The order of increasing activity for the accelerator is as follows: MK > ethyl p‐(dimethylamino)benzoate > N,N‐dimethylaniline > triethanolamine. The optimum diluent monomer is trimethylolpropane trimethacrylate. The gel content of the mixture of the resin and trimethylolpropane trimethacrylate could reach 85% using the combined photoinitiators of BE and AQ under UV exposure for 120 s. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1607–1614, 2005     

Diterpene resin acids: Major active principles in tall oil against Variegated cutworm,Peridroma saucia (Lepidoptera: Noctuidae)

Tall oil, a by-product of the kraft process for pulping softwood, has been shown to have insecticidal properties. In the present study, the active principles in tall oil against the variegated cutworm,Peridroma saucia Hübner, were investigated. GC-MS analysis showed that abietic, dehydroabietic, and isopimaric acids were major resin acid components of crude tall oil and depitched tall oil. When crude tall oil samples of differing resin acid composition were incorporated into artificial diet at a concentration of 2.0% fresh weight, they suppressed larval growth by 45–60% compared to controls. This suppression was significantly (P0.05) correlated with the equivalent contents of abietic, dehydroabietic, isopimaric, and total resin acids. These results were also evident from a diet choice test, showing that the second-instar larvae obviously selected diets with low levels of resin acids when different diets were randomly arranged in a Petri dish. Bioassays with pure resin acids (abietic, dehydroabietic, and isopimaric acids) demonstrated that all individual chemicals have similar bioactivity against this insect. Comparison of the bioactivities of depitched tall oil and an equivalent mixture of pure resin acids in thePeridroma chronic growth bioassay indicated that pure resin acids and depitched tall oil share a common mode of action to this insect. This study confirms that resin acids are major active principles in tall oil against the variegated cutworm, but other chemicals likely also contribute to the bioactivity of tall oil.     

Random Copolymers with 2,2′-Dioxy-1,1′-biphenyl-phosphazene and Chiral 2,2′-dioxy-1,1′-binaphthylphosphazene Units Functionalized in the 6,6′-Positions with PPh<Subscript>2</Subscript> Groups as Precursors for Ru(arene) Catalysts

The chiral phosphazene copolymers {[NP(O₂C₁₂H₈)]_0.9[NP(O₂C₂₀H₁₂)]_0.1} (1) and {[NP(O₂C₁₂H₈)]_0.9[NP(O₂C₂₀H₁₀Br₂)]_0.1} _n (2) [(O₂C₁₂H₈) = 2,2′-dioxy-1,1′-biphenyl; (O₂C₂₀H₁₂) = R-2,2′-dioxy-1,1′-binaphthyl and (O₂C₂₀H₁₀Br₂) = R-6,6′-dibromo-2,2′-dioxy-1,1′-binaphthyl] were prepared by sequential substitution from [NPCl₂] _n and the corresponding dihydroxy-biphenyl or binaphthyl reagents in the presence of Cs₂CO₃ and K₂CO₃. The reaction of (2) with ^tBuLi in THF, followed by addition of PPh₂Cl and a treatment with SiHCl₃/PPh₃ to eliminate any oxidized OC₆H₄P(O)Ph₂ groups, gave the phosphine containing copolymer {[NP(O₂C₁₂H₈)]_0.9[NP(O₂C₂₀H₁₀[PPh₂]₂)]_0.1} _n (3), that was used as a chiral ligand to support [Ru(p-cymene)Cl] complexes. The resulting catalyst was active for hydrogen transfer from isopropyl alcohol to acetophenone but the placement of the Ru centers in the 6,6′-positions of the binaphthoxyphosphazene units induced no enantioselectivity. Dedicated to Professor Christopher Allen.     

Novel method for preparation of quaternary ammonium ionomer from epoxidized styrene–butadiene–styrene triblock copolymer and its use as compatibilizer for blending of styrene–butadiene–styrene and chlorosulfonated polyethylene

A novel method for the preparation of a quaternary ammonium ionomer of styrene–butadiene–styrene triblock copolymer (SBS) was developed by a ring‐opening reaction of epoxidized SBS with triethylamine hydrochloride in the presence of a phase transfer catalyst. The optimum conditions were studied. The ionomer was characterized by quantitative analysis, IR spectroscopy, and ¹H‐NMR spectroscopy. Its water absorbency, oil absorbency, dilute solution viscosity, and use as a compatibilizer for the blending of SBS and chlorosulfonated polyethylene (CSPE) were investigated. The results showed that, under optimum conditions, the epoxy groups can be completely converted to the quaternary ammonium groups. The IR spectrum did not exhibit the absorption peak for quaternary ammonium groups, whereas the ¹H‐NMR spectrum and titration method demonstrated it. With increasing ionic group content, the water absorbency of the ionomer increased whereas its oil absorbency decreased. These indicated the amphiphilic character of the SBS ionomer. The dilute solution viscosity of the ionomer in toluene/methanol (9/1) solvent increased with increasing quaternary ammonium group content. The ionomer was used as a compatibilizer for the blends of SBS and CSPE. The addition of a small amount of the ionomer to the blend enhanced the mechanical properties of the blends: 2 wt % ionomer based on the blend increased the tensile strength and ultimate elongation of the blend nearly 2 times. The blends of equal parts SBS and CSPE behaved as oil‐resistant thermoplastic elastomers. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1975–1980, 2006     

ZrO2-CaO-BN复合材料抗氧化性的研究

为解决浸入式水口的结瘤问题 ,采用热压烧结方法制备了ZrO2 -CaO -BN复合材料 ,讨论了其氧化动力学过程 ,推导了氧化速度和氧化温度的数学关系式 ,并研究了其抗氧化性能及氧化层产物的显微结构。实验表明 :ZrO2 -CaO -BN复合材料在 90 0℃以下有很好的抗氧化性 ,而在 12 0 0℃以上氧化明显加剧 ;135 0℃时 ,材料的氧化产物主要由Ca3 B2 O6组成 ;ZrO2 -CaO -BN材料的氧化规律服从反应控速 -混合控速 -扩散控速 3段模型。     

Characteristic modes and flow structure of non-premixed flame in humid-air combustion

An experimental study has been performed in order to determine the effect of humidity on the flow field and the flame stability limit in turbulent non-premixed flame. Two-dimensional Particle Image Velocimetry (PIV) measurements were made to quantify the velocity field, with and without steam injected. The results indicate the addition of steam decreases the recirculation flow and reduces the distance between the forward and aft stagnation points. The detailed stabilization regimes show that the critical fuel-to-air velocity ratios of the central fuel penetration in the humid air case are 16% to 22% lower, and the partially quenching limits are at least 25% lower. The decreased penetration limit is due to a reduction in momentum of the humid air. An analysis of flamelet concepts reveals that increased chemical reaction time leads to lower partially quenching limits in the humid air combustion.     

Identification of organochlorines and organobromines in coals

Four Chinese bituminous coals were extracted with CS₂, n-hexane, benzene, methanol, acetone, tetrahydrofuran (THF) and THF/methanol (1: 3 vol/vol) mixed solvent sequentially. The resulting 28 extracts were analyzed with GC/MS. Six organochlorines (OCs) and two organobromines (OBs) were identified in eight extracts from the coals. Our experiments provide, for the first time, the information on the molecular structure of OCs and OBs in coals.     

纯正黑色釉的研制

研究了用金属氧化物和硅酸盐材料直接制取纯正黑色釉的可行性，探讨了氧化铁、氧化铝、氧化钢、氧化信和氧化锰对黑釉性质的影响。     

Modeling of photocatalytic oxidation of VOCs in a packed bed reactor under continuous and discontinuous illuminations

In this paper, a mathematical model is presented to describe the photocatalytic degradation of VOCs in a packed bed reactor. Here, the adsorption of VOCs on the wall of the reactor is taken into account and the diffusion of VOCs in the axial direction is neglected. First-order kinetics is used to describe the photocatalytic oxidation of VOCs. The analytical solution of the present model is obtained by traveling wave method. The solution shows that the reactor performance is totally dependent on the inlet concentration of VOCs when the time is large enough. The present model is validated through the experimental result of the photocatalytic oxidation of trichloroethylene in a packed bed and the predicted results accord well with the experimental data. The influence of flow rate and inlet concentration on the performance of the reactor is discussed in detail. High flow rate offers high reaction rate and low conversion efficiency. The different inlet conditions and different reaction patterns are also investigated. The model would be useful to estimate the rate constant and help to the design of the reactor.     

Phase Relations in the System Al2O3–B2O3–Nd2O3

The phase relations at a temperature below "subsolidus" in the system Al₂O₃–B₂O₃–Nd₂O₃ are reported. Specimens were prepared from various compositions of Al₂O₃, B₂O₃, and Nd₂O₃ of purity 99.5%, 99.99%, and 99.9%, respectively, and fired at 1100°C. There are six binary compounds and one ternary compound in this system. The ternary compound, NdAl₃(BO₃)₄ (NAB), has a phase transition at 950°C ± 15°C. The high-temperature form of NAB has a second harmonic generation (SHG) efficiency of KH₂PO₄ (KDP) of the order of magnitude of the form which has been used as a good self-activated laser material, and the low-temperature form of NAB has no SHG efficiency.