Internet网络延时分析

本文对Internet网络延迟进行了较为全面的分析，介绍了几种减少网络延迟的技术。然后提出一种新的方法，并用排队论加以分析。     

THE SIMULATION OF THE SAR IMAGE OF INTERNAL SOLITARY WAVES IN ALBORAN SEA

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＯｃｅａｎｉｎｔｅｒｎａｌｗａｖｅｉｓａｋｉｎｄｏｆｇｒａｖｉｔｙｗａｖｅｇｅｎｅｒａｔｅｄｉｎｔｈｅｓｔｒａｔｉｆｉｅｄｏｃｅａｎ .Ｉｔｐｒｏｄｕｃｅｂｙｔｈｅｉｎｔｅｒａｃｔｉｏｎｏｆｔｉｄｅｃｕｒｒｅｎｔａｎｄｔｏｐｏｇｒａｐｈｙ ,ｓｅａｑｕａｋｅａｎｄｍｏｖｉｎｇｓｈｉｐｗｈｅｎｔｈｅｓｔｒｏｎｇ ,ｓｈａｌｌｏｗｐｙｃｎｏｃｌｉｎｅｉｓ ｐｒｅｓｅｎｔ.Ｔｈｅｉｎｔｅｒｎａｌｗａｖｅｓｉｎｔｈｅｃｏｎｔｉｎｅｎｔａｌｓｈｅｌｆａｒｅａｌｍｏｓｔｔｉｄｅｐｒｏｄ…     

YAG激光熔覆的研究现状与发展趋势

本文介绍了YAG激光熔覆的特点，并与CO2激光进行了比较，显示了YAG激光熔覆的优势和潜力。叙述了YAG激光熔覆的研究进展及其应用前景。     

测井资料高分辨率层序地层分析

高分辨率层序地层学克服了岩性地层对比穿时的缺点.高分辨率层序地层对比是等时的高精度的地层对比,它满足了勘探开发中地层对比等时性和高分辨率的要求.测井资料的纵向分辨率较高,是高分辨率层序地层研究的重要资料.提出了利用测井相分析技术,从测井资料上识别出单井岩性和沉积微相剖面,结合测井曲线特征,划分单井基准面旋回,并进行连井地层等时对比,这为定量地进行高分辨率层序地层分析提供了一种方法.通过研究区实际资料的处理,验证了该方法的有效性.     

Adiabatic shear bands on the titanium side in the titanium/mild steel explosive cladding interface: Experiments, numerical simulation, and microstructure evolution

The microstructure and microtexture in adiabatic shear bands (ASBs) on the titanium side in the titanium/mild steel explosive cladding interface are investigated by means of optical microscopy, scanning electron microscopy/electron backscattered diffraction (SEM/EBSD), and transmission electron microscopy (TEM). Highly elongated subgrains and fine equiaxed grains with low dislocation density are observed in the ASBs. Microtextures (25 deg, 75 deg, 0 deg), (70 deg, 45 deg, 0 deg), and (0 deg, 15 deg, 30 deg) formed within the ASBs suggest the occurrence of the recrystallization. The grain boundaries within ASBs are geometrically necessary boundaries (GNBs) with high angles. Finite element computations are performed to obtain the effective strain and temperature distributions within the ASBs under the measured boundary conditions. The rotation dynamic recrystallization (RDR) mechanism is employed to describe the kinetics of the nanograins’ formation and the recrystallized process within ASBs. During the deformation time (about 5 to 10 μs), the following processes take place: dislocations accumulate to form elongated cell structures, cell structures break up to form subgrains, and subgrains rotate and finally form recrystallized grains. The small grains within ASBs are formed during the deformation and do not undergo significant growth by grain boundary migration after deformation.     

氢化非晶硅磷掺杂工艺条件的研究

本文对氧化非晶硅磷掺杂的工艺条件进行了研究，得出掺磷氢化非晶硅的电导率随衬底温度、气体流量、气体压力、射频功率、淀积时间的变化关系，为非晶硅的有效掺杂和器件研究提供了依据。     

深大露天矿综合开采工艺主要设计参数的研究

深大露天矿的间断向半连续开采工艺过渡时，合理深度及半连续开采工艺的移设步距是两个重要的开采参数，对矿山的经济效果影响巨大，本文首次提出采用组合台阶单位体的开采来分析确定这两个重要的参数，得到的结论在霍林河煤矿的应用中取得了满意的结果，对其它类似矿山具有应用价值。     

激光光束质量因子M~2的物理概念与测试方法

激光光束传输质量因子Ｍ２是一种全新的描述激光光束质量的参数，它能定量表征单模、多模光束传播特性。本文介绍Ｍ２的物理概念、特点、测试方法及近年来国外的研究概况。     

多缝式烧嘴点火器在攀钢烧结生产中的应用

多缝式烧嘴点火器具有燃烧效率高，火焰长度易调，炉膛温度分布合理等优点，经工业试验证明，该点火器能满足攀钢烧结点火工艺要求，并有明显节能效果。