Study on hydrogen atom adsorption and diffusion properties on Mg (0001) surface

Hydrogen atom adsorption and diffusion properties on clean and vacancy defective Mg (0001) surface have been investigated systematically by using a first-principles calculations method based on the density functional theory. The calculation results of adsorption energy and diffusion energy barrier show that hydrogen atom is apt to be adsorbed at fcc and hcp sites on clean Mg (0001) surface, and fcc adsorption site is found to be more preferred. The highest diffusion energy barrier is estimated as 0.6784 eV for the diffusion of hydrogen from clean Mg (0001) surface into its bulk. Surface effects, which affect hydrogen diffusion obviously, results in a slow diffusion velocity of hydrogen from surface to subsurface, while a fast one from subsurface to bulk, indicating the range of surface effects is only restricted within two topmost layers of Mg (0001) surface. Comparatively, Mg atom vacancy on Mg (0001) surface not only enhances the chemisorption interaction between H and Mg surface, but also benefits H atom diffusion in Mg bulk with relatively more diffusion paths compared with that of clean surface. Besides, hydrogen atom is found to occupy mostly the tetrahedral interstice when it diffuses into the Mg bulk. Further analysis of the density of states (DOS) shows that the system for hydrogen atom to be adsorbed at fcc site has a lower DOS value (N (E _F)) at Fermi level and more bonding electrons at the energy range blow the Fermi level of H/Mg (0001) system as compared with that at hcp site. On the other hand, the enhanced chemisorption interaction between hydrogen and defective surface should be attributed to the fact that the electronic structures of Mg (0001) surface are modified by an Mg vacancy, and the bonding electrons of the topmost layer Mg atoms are transferred from low energy range to Fermi level, which is in favor of improving the surface activity of Mg (0001) surface. Supported by the PhD Programs Foundation of Ministry of Education of China (Grant No. 200805321032), the Science and Technology Program Project of Hunan Province (Grant No. 2008GK3083) and the Program for Changjiang Scholars and the Innovative Research Team in university (Grant No. 531105050037)     

Separation of nanocolloids driven by dielectrophoresis: A molecular dynamics simulation

The nonequilibrium molecular dynamics (MD) method was used to model the nanocolloids and the solvent particles. By introducing a non-uniform electric field, colloids were polarized to have opposite polarities. Separation of colloids driven by dielectrophoresis (DEP) could be seen clearly under a strong electric field at low temperatures. Analyzing the ratio of DEP velocities of colloids to thermal velocities of neutral solvent particles showed that when the ratio was correspondingly big, collision between colloids and solvent particles would be intense, making the DEP velocity of colloids fluctuate frequently. By changing the electric field strength, it was found that the enhancement of electric field strength would quicken the separation of colloids. But when the electric field strength increased to a certain degree, the separation motion would be slow because of the strong friction resistance of the solvent particles to the colloids. Moreover, studying the separation reason of colloids based on the potential energy showed that after colloids were polarized, the attractive potential energy among the colloids would be weaker than before, while the increase of temperature would reduce the attractive potential energy and increase the repulsive potential energy, which accorded with the DLVO theory. Supported by the National Hi-Tech Research and Derelopment Program of China (“863” Project) (Grant No. 2006AA04Z351) and the National Natural Science Foundation of China (Grant Nos. 50675033, 30770553)     

Effect of coagulation temperature on structures and properties of poly(<Emphasis Type="Italic">p</Emphasis>-phenylene benzobisoxazole) (DHPBO) fibers during dry-jet wet-spinning process

The effect of coagulation temperature on the morphology, microstructures and mechanical properties of dihydroxy poly(p-phenylene benzobisoxazole) (DHPBO) fibers was investigated during dry-jet wet-spinning process, in which the coagulation bath concentration and drawn ratio were kept as 10 wt% of PPA in water and 1.7, respectively. The structures and mechanical properties of the as-spun DHPBO fibers were characterized by FTIR, XRD, SEM, and single fiber tensile testing. The results indicated that in PPA/H₂O coagulation system, when the coagulation temperature was 25°C, highly crystallized DHPBO as-spun fibers possessing fine crystallites, circular and smooth morphology, and excellent mechanical properties could be achieved. Supported by the National Natural Science Foundation of China (Grant No. 50673017), Shanghai Leading Academic Discipline Project (Grant No. B603) and the Program of Introducing Taleuts of Discipline to University of People’s Republic of China (“111” Program) (Grant No. 111-2-04)     

Development of a unified viscoplasticity constitutive model based on classical plasticity theory

The traditional unified viscoplasticity constitutive model can be only applied to metal materials. The study of the unified constitutive theory for metal materials has discovered the correlation between the classical plasticity theory and the unified viscoplasticity constitutive model, thus leading to the concepts of the classic plastic potential and yield surface in the unified constitutive model. Moreover, this research has given the continuous expression of the classical plastic multiplier and presented the corresponding constructive method, which extends its physical significance and lays down a good foundation for the application of the unified constitutive theory to the material analysis in more fields. This paper also introduces the unified constitutive model for metal materials and geo-materials. The numerical simulation indicates that the construction should be both reasonable and practical. Supported by the National Natural Science Foundation of China (Grant No. 90410012)     

Rapid prediction method for nonlinear expansion process of medical vascular stent

A neural network model with high nonlinear recognition capability was constructed to describe the relationship between the deformation impact factors and the deformation results of vascular stent.Then,using the weighted correction method with the attached momentum term,the network training algorithm was optimized by introducing learning factor η and momentum factor ψ,so the speed of the network training and the system robustness were enhanced.The network was trained by some practi-cal cases,and the statisti...     

A new type counter electrode for dye-sensitized solar cells

A new type counter electrode for dye-sensitized solar cells (DSCs) was proposed which consists of substrate, aluminum film and platinum film. The new type counter electrode can obviously improve the photoelectric conversion efficiency of DSCs from 3.46% to 7.07% under the standard AM1.5 irradiation condition. Advantages and shortcomings of this new type counter electrode in terms of electrical properties, optical properties and anti-corrosive properties were analyzed. As a result, some improvements were proposed. Supported by the Key Foundation for Fundamental Research of Tianjin Municipal Science & Technology Commission in China ( Grant No. 06YFJZJC01700) and the National Basic Research Program of China (“973“ Project) (Grant Nos. 2006CB20260, 2006CB202603)     

Method of change management based on dynamic machining error propagation

In multistage machining processes(MMPs),the final quality of a part is influenced by a series of machining processes,which are complex correlations.So it is necessary to research the rule of machin-ing error propagation to ensure the machining quality.For this issue,a change management method of quality control nodes(i.e.,QC-nodes) for machining error propagation is proposed.A new framework of QC-nodes is proposed including association analysis of quality attributes,quality closed-loop control,error tracing...     

Equilibrium equations for nonlinear buckling analysis of drill-strings in 3D curved well-bores

With the development of drilling technology, the oil/gas well has evolved from its early vertical straight form to the inclined, horizontal, plane curved, or even 3D curved well-bore. Understanding of the buck-ling behavior of a drill-string in a well-bore is crucial for the success of a drilling operation. Therefore, equilibrium equations for analyzing the buckling behavior of a drill-string in a 3D curved well-bore are required. Based on Love’s equilibrium equations for a curved and twisted rod in space, ...     

A macro-meso constitutive law for concrete having imperfect interface and nonlinear matrix

The overall behavior of concrete depends on its meso structures such as aggregate shape, interface status, and mortar matrix property. The two key meso structure characters of concrete, bond status of interface and nonlinear property of matrix, are considered in focus. The variational structure principle is adopted to establish the macro-meso constitutive law of concrete. Specially, a linear reference composite material is selected to make its effective behavior approach the nonlinear overall behavior of concrete. And the overall property of linear reference composite can be estimated by classical estimation method such as self-consistent estimates method and Mori-Tanaka method. This variational structure method involves an optimum problem ultimately. Finally, the macro-meso constitutive law of concrete is established by optimizing the shear modulus of matrix of the linear reference composite. By analyzing the constitutive relation of concrete established, we find that the brittleness of concrete stems from the imperfect interface and the shear dilation property of concrete comes from the micro holes contained in concrete. Supported by the National Natural Science Foundation of China (Grant Nos. 50679022, 90510017, 50539090) and National Basic Research Program of China (Grant No. 2007CB714104)     

Development of Zr/ZrO<Subscript>2</Subscript> high temperature and high pressure sensors for <Emphasis Type="Italic">in-situ</Emphasis> measuring chemical parameters of deep-sea water

In order to in situ measure chemical parameters of deep-sea water and hydrothermal fluids at midocean ridge(MOR), it is necessary to use high temperature and high pressure chemical sensors.Developing new sensors is essential to measure in-situ pH and other chemical parameters(dissolved H2, dissolved H2S) of deep-sea water and hydrothermal fluids in a wide temperature range(2℃―400℃) at MOR vents.The YSZ(Yttria Stabilized Zirconia, 9%Y2O3) ceramic-based(HgO/Hg) chemical sensors possess excellent electrochemic...