The (1–3, 1–4)‐β‐Glucanases in Malting Barley: Enzyme Survival and Genetic and Environmental Effects

Eighteen barley genotypes used in Brazilian malting barley breeding programs were characterized in relation to (1–3, 1–4)‐β‐glucanase activity in green and kilned malt. They were tested to determine the loss of enzyme activity during kilning in the malting process and the environmental effects on enzyme activity were measured. The genotypes analyzed showed great variation regarding the enzyme activity in both kinds of malt, in a range from 531.94 to 934.31 U/kg in green malt, and from 187.02 to 518.40 U/kg in dry malt. The mean enzyme activity loss during kilning was close to 60%, very similar to the results obtained in other studies. The loss among genotypes varied from 8.04% to 71.54%. The enzyme activity varied significantly under the different environments tested, showing existence of environmental effects on the genotypes analyzed. Embrapa 127 was the genotype that exhibited the highest enzyme activity in finished malt although it had shown a low activity in green malt, reflecting a negligible loss of activity during kilning. The data indicate promising results to malting barley breeding due to the wide variability exhibited by genotypes as to enzyme activity and levels of isoenzyme with high thermostability.     

Dredging and disposal of fine sediments in the state of Rio de Janeiro, Brazil.

Dredging is employed quite frequently in the state of Rio de Janeiro, especially for the installation and upkeep of commercial ports and rehabilitation of the hydraulic section of silted bodies of water. Until recently, all dredged material with no economic use was destined for marine disposal or stored at the edge of the water body. Since the 1990s, however, a new approach has been adopted for dredging as a result of pressure from the environmental organisations, encouraging closer interaction in Rio de Janeiro between the local and state public authorities and the universities on issues relating to licensing of this kind of activity. The recent experiments of the Civil and Ocean Engineering Programs of COPPE-UFRJ (Federal University of Rio de Janeiro) described herein are included in this context. The state of Rio de Janeiro has three bays, several coastal lagoon systems and a number of small and medium sized rivers in or close to urban areas, with a gentle slope as they near the sea. This is, then, a region highly susceptible to silting processes of water bodies, and therefore, to maintenance and/or environmental rehabilitation. As discussed in the article, fine and almost always organic sediments prevail, which is a considerable obstacle to the end disposal and possibility of reuse.     

Triethanolamine Stabilization of Methotrexate-β-Cyclodextrin Interactions in Ternary Complexes

The interaction of methotrexate (MTX) with beta-cyclodextrin (β-CD) in the presence of triethanolamine (TEA) was investigated with the aim to elucidate the mechanism whereby self-assembly cyclodextrin systems work in association with this third component. Solubility diagram studies showed synergic increment of the MTX solubility to be about thirty-fold. Experiments using 2D ROESY and molecular modeling studies revealed the inclusion of aromatic ring III of the drug into β-CD cavity, in which TEA contributes by intensifying MTX interaction with β-CD and stabilizes MTX:β-CD:TEA ternary complex by electrostatic interaction. The maintenance of these interactions in solid phase was also studied in ternary MTX:β-CD:TEA and comparisons were made with freeze dried binary MTX:β-CD and physical mixtures. FTIR studies evidenced that MTX–β-CD interaction remained in solid ternary complexes, which was also supported by thermal (differential scanning calorimetry (DSC), thermogravimetric analysis (TG)/first derivative of TG analysis (DTG) and C,N,H elementary analysis) and structural (X-ray diffraction analysis, (XRD)) studies, mainly regarding the increment of drug stability. The efficient in vitro drug dissolution studies successfully demonstrated the contribution of ternary complexes, which highlights the importance of this possible new raw material for further applications in drug delivery systems.     

Springtime Monitoring of Passive Cool Roofs in Subtropical Climate

Passive strategies for acclimatization of buildings have been studied by several authors in many countries, especially the evaporative and radiant cooling techniques. Fiber cement tiles are very common in popular constructions due to their low cost. However, they have over twice of the value thermal transmittance indicated to this bioclimatic zone according to Brazilian guidelines. The objective is to present an alternative to reduce high temperatures on fiber cement tiles. In this paper, the monitoring of passive cooling of roofing during the spring season in a city with subtropical climate is described. Single and combined reflective and evaporative cooling systems were studied in different environmental conditions. Internal surface temperatures of tiles were monitored together with weather variables. Results show a decrease of about 6 ℃, 9 ℃, 10 ℃ and 11 ℃ as compared to the original tiles according to environment conditions and the combined passive cooling techniques. These results allow for the conclusion that the use of passive cooling techniques opens up new possibilities to attenuate the internal surface temperatures of tiles and to consequently decrease the roofing solar heat gain into buildings, thus, providing less air cooling energy consumption.     

Fatigue crack growth rates of API X70 pipeline steel in a pressurized hydrogen gas environment

Hydrogen is known to have a deleterious effect on most engineering alloys. It has been shown repeatedly that the strength of steels is inversely related to the ductility of the material in hydrogen gas. However, the fatigue properties with respect to strength are not as well documented or understood. Here, we present the results of tests of the fatigue crack growth rate (FCGR) on API X70 from two sources. The two materials were tested in air, 5.5 and 34 MPa pressurized hydrogen gas, and at both 1 and 0.1 Hz. At these hydrogen pressures, the FCGR increases above that of air for all values of the stress intensity factor range (ΔK) greater than ~7 MPa · m^1/2. The effect of hydrogen is particularly sensitive at values of ΔK below ~15 MPa · m^1/2. That is, for values of ΔK between 7 and 15 MPa · m^1/2, the FCGR rapidly increases from approximately that found in air to as much as two orders of magnitude above that in air. Above 15 MPa · m^1/2, the FCGR remains approximately one to two orders of magnitude higher than that of air.     

Dilute mixed-acid pretreatment of sugarcane bagasse for ethanol production

Integral utilisation of bagasse is a high priority for the diversification of the sugarcane industry. The application of a biorefinery philosophy to bagasse utilisation requires its fractionation into its main components: cellulose, hemicelluloses and lignin. The first stage in that process is the pretreatment, in which a considerable part of hemicelluloses is solubilised, and cellulose is activated towards enzymatic hydrolysis. In this work, a pretreatment method using a mixture of sulfuric and acetic acid is investigated. Two different solid-to-liquid ratios (1.5:10 and 1:10) were used in the pretreatment. Both conditions efficiently hydrolysed the hemicelluloses giving removals above 90%. The extractive components were also effectively solubilised, and lignin was only slightly affected. Cellulose degradation was below 15%, which corresponded to the low crystallinity fraction. The analysis of the morphology of pretreated bagasse confirmed the results obtained in the chemical characterization.     

Transition from screen-film to computed radiography in a paediatric hospital: the missing link towards optimisation

In paediatrics, the risks associated with ionising radiation should be a major concern, due to children's higher susceptibility to radiation effects. Measure entrance skin dose (ESD) in chest and pelvis X-ray projections and compare the results with the 'European guidelines on quality criteria for diagnostic radiographer images in paediatrics' in order to optimise radiological practice. ESD values were obtained using an ionisation chamber Diamentor M4 KDK (PTW) in 429 children, who underwent chest X-ray or pelvis X-ray in a Computed Radiography system. In the first phase of the study, data were collected according to protocols used in the department; in a second phase different tube voltage values were used according to patient weight. A third phase was carried out, only for chest X-ray, using the exposure parameters of phase 2, plus activating lateral ionisation chamber. Three paediatric radiologists blindly assessed image quality of chest X-ray, using a validated assessment available in the 'European guidelines on quality criteria for diagnostic radiographer images in paediatrics'. Considering all the patients submitted to chest X-ray, the average ESD was 0.22, 0.16 and 0.08 mGy, for phases 1, 2 and 3, respectively. For pelvis X-ray, the average ESD decreased from 1.18 mGy in phase 1 to 0.78 mGy in phase 2. Dose optimisation was achieved. ESD was reduced 63.6 and 33.9 % in chest and pelvis X-ray, respectively.     

Towards a conceptualisation of quality in information technology projects

Quality has been extensively studied in repetitive operations, but it remains under-researched in projects. The uncertainty and dynamics of projects challenge the principles of quality developed for repetitive operations, and call for project-tailored solutions. This article explores the attributes of quality in projects, based on interviews conducted within a large IT-services company. An adapted repertory grid was used to investigate the understanding of quality by comparing concrete examples of projects considered as high or low quality. Eight attributes of quality were identified, which indicate a tension between a mechanistic standpoint of quality, and the need to incorporate less tangible aspects.     

Modifications in the molecular structure of hydroxyapatite induced by titanium ions

The purpose of this study was to contribute to the understanding of the effect of titanium ions released from a metallic substrate on the molecular structure of hydroxyapatite. The effects of pH, time of incubation and concentration of titanium ions were investigated. The solids were analysed by X-ray diffraction, Fourier transform infrared spectroscopy, Fourier transform Raman spectroscopy, energy dispersive X-ray analysis and thermogravimetric analysis. The results clearly indicate the presence of a titanium phosphate, Ti(HPO₄)₂·nH₂O (n=1–3), which probably has a double layered structure. The formation of this compound is dependent on the titanium concentration and its crystallinity increases with the time of incubation.     

Treatment of lupus crisis with IgIV

BACKGROUND: Intravenous Immunoglobulin (i.v.Ig) has been advocated as efficacious for Systemic Lupus Erytematosus (SLE) and Lupic Nephritis (LN) using high dosages, propitious a prolonged remission of SLE. MATERIAL AND METHOD: We show the case of a male patient 16 years old, with SLE diagnosis until 1993, and LN phase IV. He attend to hospital with a Lupic Crisis, positives ANAs, DNAds, ScL 427, C3 45, C4 13, IgG 179, urinary sediment: leukocytes 30-40 xc, erythrocytes 8-10 xc. Renal failure: BUN 243, seric Cr: 10.16. I.v. Ig administrated 400 mgs k do. And nephrologic assistance, NK. RESULTS: There was improvement after infusion, clinical and serological, persisting with renal failure. The mechanism by which i.v. Ig might have effected improvement in this patient was reviewed. CONCLUSION: The use in our patient with SLE and LN was satisfactory. Is difficult affirm categorical the outcome or failure of i.v. Ig in patients with SLE, even report founded are only few cases report.