Validation of an LC-MS/MS method for malachite green (MG), leucomalachite green (LMG), crystal violet (CV) and leucocrystal violet (LCV) residues in fish and shrimp

A quantitative liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for the simultaneous analyses of malachite green (MG), crystal violet (CV) and its major metabolites, leucomalachite green (LMG) and leucocrystal violet (LCV) residues in fish and shrimp samples has been validated. Fish and shrimp samples were extracted with citrate buffer/acetonitrile, and the extracts were purified on strong cation-exchange (SCX) solid-phase extraction (SPE) cartridge. After conversion of LMG into MG using a post column oxidation reactor containing lead (IV) oxide (PbO(2)), the effluents were analysed. Residues were analysed using positive-ion electrospray ionisation (ESI). Identification and quantification of analytes were based on the ion transitions monitored by multiple reaction monitoring (MRM). Validation of the method was carried out in accordance with the Decision 2002/657/EC, which establishes criteria and procedures for the validation of methods. The following parameters were determined: decision limit (CCα), detection capability (CCβ), linearity, accuracy, precision, selectivity, specificity and matrix effect. The decision limits (CCα) for MG, LMG, CV and LCV were 0.164, 0.161, 0.248 and 0.860 μg kg(-1). The respective detection capabilities (CCβ) were 0.222, 0.218, 0.355 and 1.162 μg kg(-1). Typical recoveries (intermediate precision) in shrimp, for MG, CV, LMG and LCV for 2.0 μg kg(-1) level fortified samples using the optimised procedure were in the range 69%, 97%, 80.3% and 71.8%, respectively. The findings demonstrate the suitability of the method to detect simultaneously MG, CV and its metabolite (LMG and LCV) in fish and shrimp.     

Residential electricity consumption in Portugal: Findings from top-down and bottom-up models

An econometric study of the Portuguese residential electricity consumption is presented, with a focus on the influence of dwelling characteristics on consumption. The relationship between the dwelling and household characteristics on per capita residential electricity consumption is estimated at two different scales, involving two distinct databases: the first includes data at the municipality level for 2001, the second is the most recent Portuguese consumer expenditure survey that was collected in 2005 and 2006. The results of the analysis at both scales are consistent and indicate that household and dwelling characteristics have a significant influence on residential electricity consumption. Our results show that in Portugal the direct effect of income on electricity consumption is low and becomes smaller when more relevant control variables are included in the analysis. Future demand of electricity in Portugal will be significantly influenced by trends in socioeconomic factors as well as changes in the building stock. These trends should be taken in consideration in the formulation of policy measures to reduce electricity consumption.     

Bisnaphthalimidopropyl Derivatives as Inhibitors of Leishmania SIR2 Related Protein 1

The NAD⁺‐dependent deacetylases, namely sirtuins, are involved in the regulation of a variety of biological processes such as gene silencing, DNA repair, longevity, metabolism, apoptosis, and development. An enzyme from the parasite Leishmania infantum that belongs to this family, LiSIR2RP1, is a NAD⁺‐dependent tubulin deacetylase and an ADP‐ribosyltransferase. This enzyme's involvement in L. infantum virulence and survival underscores its potential as a drug target. Our search for selective inhibitors of LiSIR2RP1 has led, for the first time, to the identification of the antiparasitic and anticancer bisnaphthalimidopropyl (BNIP) alkyl di‐ and triamines (IC₅₀ values in the single‐digit micromolar range for the most potent compounds). Structure–activity studies were conducted with 12 BNIP derivatives that differ in the length of the central alkyl chain, which links the two naphthalimidopropyl moieties. The most active and selective compound is the BNIP diaminononane (BNIPDanon), with IC₅₀ values of 5.7 and 97.4 μM against the parasite and human forms (SIRT1) of the enzyme, respectively. Furthermore, this compound is an NAD⁺‐competitive inhibitor that interacts differently with the parasite and human enzymes, as determined by docking analysis, which might explain its selectivity toward the parasitic enzyme.     

The Role of Cytoskeleton Revealed by Quartz Crystal Microbalance and Digital Holographic Microscopy

The connection between cytoskeleton alterations and diseases is well known and has stimulated research on cell mechanics, aiming to develop reliable biomarkers. In this study, we present results on rheological, adhesion, and morphological properties of primary rat cardiac fibroblasts, the cytoskeleton of which was altered by treatment with cytochalasin D (Cyt-D) and nocodazole (Noc), respectively. We used two complementary techniques: quartz crystal microbalance (QCM) and digital holographic microscopy (DHM). Qualitative data on cell viscoelasticity and adhesion changes at the cell–substrate near-interface layer were obtained with QCM, while DHM allowed the measurement of morphological changes due to the cytoskeletal alterations. A rapid effect of Cyt-D was observed, leading to a reduction in cell viscosity, loss of adhesion, and cell rounding, often followed by detachment from the surface. Noc treatment, instead, induced slower but continuous variations in the rheological behavior for four hours of treatment. The higher vibrational energy dissipation reflected the cell’s ability to maintain a stable attachment to the substrate, while a cytoskeletal rearrangement occurs. In fact, along with the complete disaggregation of microtubules at prolonged drug exposure, a compensatory effect of actin polymerization emerged, with increased stress fiber formation.     

Leaf and stem micromorphology of Byrsonima sericea DC. by light and scanning electron microscopy

Micromorphological studies were carried out using multiple microscopic techniques on the leaves and stem bark of Byrsonima sericea DC. (Malpighiaceae), a species popularly known as “murici” and used medicinally, in order to identify both qualitative and quantitative features of leaf and stem anatomy and histochemistry as differential parameters to support both the quality control of its ethnodrugs and the taxonomy of the genus. The study was conducted using traditional techniques of plant anatomy, histochemical tests, and the stomatal index (SI). Byrsonima sericea has hypostomatic leaves, anomocytic stomata, and its epidermal walls are anticlinal and straight on the adaxial and curved on the abaxial faces. T‐shaped trichomes were observed mainly on the abaxial surface. The leaf epidermis showed waxes syntopism on both surfaces, with the occurrence of different crystalloid forms on a single phylloplane. The mesophyll is dorsiventral, with 3‐4 collateral vascular bundles. Phenolic compounds, starch, and proteins were identified in the petiole and stem. The SI was 14.5 ± 0.53% (p < .05), but did not showed significant variations. A set of characters were found to be distinctive for the studied species, however, constituting parameters that could be used to separate B. sericea from other species of the genus.     

Life cycle assessment of Jatropha biodiesel as transportation fuel in rural India

Since 2003 India has been actively promoting the cultivation of Jatropha on unproductive and degraded lands (wastelands) for the production of biodiesel suitable as transportation fuel. In this paper the life cycle energy balance, global warming potential, acidification potential, eutrophication potential and land use impact on ecosystem quality is evaluated for a small scale, low-input Jatropha biodiesel system established on wasteland in rural India. In addition to the life cycle assessment of the case at hand, the environmental performance of the same system expanded with a biogas installation digesting seed cake was quantified. The environmental impacts were compared to the life cycle impacts of a fossil fuel reference system delivering the same amount of products and functions as the Jatropha biodiesel system under research. The results show that the production and use of Jatropha biodiesel triggers an 82% decrease in non-renewable energy requirement (Net Energy Ratio, NER = 1.85) and a 55% reduction in global warming potential (GWP) compared to the reference fossil-fuel based system. However, there is an increase in acidification (49%) and eutrophication (430%) from the Jatropha system relative to the reference case. Although adding biogas production to the system boosts the energy efficiency of the system (NER = 3.40), the GWP reduction would not increase (51%) due to additional CH₄ emissions. For the land use impact, Jatropha improved the structural ecosystem quality when planted on wasteland, but reduced the functional ecosystem quality. Fertilizer application (mainly N) is an important contributor to most negative impact categories. Optimizing fertilization, agronomic practices and genetics are the major system improvement options.     

Bactericidal Effects of HVOF-Sprayed Nanostructured TiO2 on Pseudomonas aeruginosa

Titanium dioxide (TiO₂) has been shown to exhibit photocatalytic bactericidal activity. This preliminary study focused on examining the photocatalytic activity of high-velocity oxy-fuel (HVOF) sprayed nanostructured TiO₂ coatings to kill Pseudomonas aeruginosa. The surfaces of the nanostructured TiO₂ coatings were lightly polished before addition of the bacterial solution. Plates of P. aeruginosa were grown, and then suspended in a phosphate buffer saline (PBS) solution. The concentration of bacteria used was determined by a photo-spectrometer, which measured the amount of light absorbed by the bacteria-filled solution. This solution was diluted and pipetted onto the coating, which was exposed to white light in 30-min intervals, up to 120 min. It was found that on polished HVOF-sprayed coatings exposed to white light, 24% of the bacteria were killed after exposure for 120 min. On stainless steel controls, approximately 6% of the bacteria were not recovered. These preliminary results show that thermal-sprayed nanostructured TiO₂ coatings exhibited photocatalytic bactericidal activity with P. aeruginosa.     

The Titanic sunk,so what? Project manager response to unexpected events

Projects are inherently uncertain and face unexpected events, from small changes in scope to unforeseen client’s bankruptcy. This paper studies how project managers respond to such events and how successful and unsuccessful responses differ from the perspective of the practitioner. We analysed 44 unexpected events faced by 22 experienced project managers in defence and defence-related organisations. The project managers compared two unexpected events that they faced, one that they considered the response successful and the other unsuccessful. We identified three pillars supporting successful responses to unexpected events: (1) responsive and functioning structure at the organisational level, (2) good interpersonal relationship at the group level and (3) competent people at the individual level. The events and respective responses analysed suggest that improvement in project management can be achieved by better managing these three pillars, allowing project and programme managers to “create their own luck”.     

Finite field trigonometric transforms

In this paper, the finite field trigonometric transforms (FFTT) are introduced. The FFTT family includes eight types of cosine transforms and eight types of sine transforms, which are developed from concepts related to the finite field trigonometry. New lemmas are presented and some properties of the FFTT are discussed.     

New carbon composite adsorbents for the removal of textile dyes from aqueous solutions: Kinetic,equilibrium, and thermodynamic studies

New carbon composite materials were prepared by pyrolysis of mixture of coffee wastes and red mud at 700 °C with the inorganic: organic ratios of 1.9 (CC-1.9) and 2.2 (CC-2.2). These adsorbents were used to remove reactive orange 16 (RO-16) and reactive red 120 (RR-120) textile dyes from aqueous solution. The CC-1.9 and CC-2.2 materials were characterized using Fourier transform infrared spectroscopy, Nitrogen adsorption/desorption curves, scanning electron Microscopy and X-ray diffraction. The kinetic of adsorption data was fitted by general order kinetic model. A three-parameter isotherm model, Liu isotherm model, gave the best fit of the equilibrium data (298 to 323 K). The maximum amounts of dyes removed at 323 K were 144.8 (CC-1.9) and 139.5 mg g^?1 (CC-2.2) for RO-16 dye and 95.76 (CC-1.9) and 93.80 mg g^?1 (CC-2.2) for RR-120 dye. Two simulated dyehouse effluents were used to investigate the application of the adsorbents for effluent treatment.