Heat transfer in forced cooled cables

A calculation method is presented for continuous rating of cable lines. The method takes into account the actual environment conditions, such as different types of soil, change of geometrical disposition, etc. This method is based on the resolution in terms of limit differences. The results for a full-scale experimental installation were used to check the theoretical model. Comparison between the measured and calculated rises showed a difference of 5% in general and a maximum of 7%, which may be considered acceptable for line design     

YEAST FLOCCULATION: A NEW METHOD FOR CHARACTERISING CELL SURFACE INTERACTIONS

Flocculation is a property of yeast cells that has been traditionally used in industrial fermentations, especially in the brewing and wine industries. It is a cell wall interaction and an increase in flocculation is strongly correlated with an increase in cell surface hydrophobicity . Methods to assay yeast cell surface hydrophobicity are only qualitative and while electrostatic interactions can play an important role, they are not always taken into account . In this work, a simple and accurate method based on contact angle measurements is described to determine yeast cell surface hydrophobicity. With this method, it is possible to quantify yeast cell surface hydrophobicity by determining the free energy of interaction between cells and water molecules. Several yeast strains with different flocculation characteristics have been used to validate the method .     

Visible PL Phenomenon at Room Temperature in Disordered Structure of SrWO4 Powder

The SrWO₄ (SWO) powders were synthesized by the polymeric precursor method and annealed at different temperatures. The SWO structure was obtained by X-ray diffraction and the corresponding photoluminescence (PL) spectra was measured. The PL results reveal that the structural order–disorder degree in the SWO lattice influences in the PL emission intensity. Only the structurally order–disordered samples present broad and intense PL band in the visible range. To understand the origin of this phenomenon, we performed quantum-mechanical calculations with crystalline and order–disordered SWO periodic models. Their electronic structures were analyzed in terms of band structure. The appearance of localized levels in the band gap of the order–disordered structure was evidenced and is a favorable condition for the intense PL to occur.     

Improved Peanut Flour for a Reduced-Fat Peanut Butter Product

A commercial peanut flour (12% fat) was mixed with water (30% w/w), homogenized and drum‐dried in a double drum dryer. The drum clearance was adjusted to result in thin dried sheets which on milling resulted in a very fine, single banded particle size flour. The flour was no longer gritty and was used to dilute fat by mixing with full fat (52.5%) paste to obtain a 30% fat reduction in the peanut butter product. Response surface methodology, RSM, was used to optimize drum temperature (T), speed (S), and clearance (C) in order to minimize stickiness and hardness, maximizing oil separation and particle size. Based on surface responses and contour plots, optimum conditions were: T = 135 °C, S = 1 rpm and C = 0.33 mm. Optimum values predicted by RSM for peanut flour particle size, peanut butter stickiness, hardness, and oil separation were: 49.65 μm, 12347 N, 311.4 N and 6.87% respectively. Close agreement between experimental and predicted values was obtained.     

Compact nA/V triode-MOSFET transconductor

A simple nA/V CMOS transconductor for low-frequency g/sub m/-C filters is presented. To benefit from the lowest g/sub m//I/sub D/ ratio, input transistors operate in the triode region, with g/sub m/ adjusted by their (W/L) and V/sub DS/, the latter a tuning-voltage replica. Since V/sub DS/ surmounts the equivalent noise of the replica circuit, excellent control of g/sub m/ is attained. Simulations support theoretical analysis. A 5Hz bandpass filter was designed, featuring SNR=59.2 dB for THD<1% at 150 mV and 17 nW consumption.     

The use of tritium content as an indicator of the groundwater contamination by sanitary landfills leachates in the region of Belo Horizonte City, Brazil

Tritium content in the leachate of sanitary landfills, in concentrations well above those observed in global precipitation, can be used as a tracer for the evaluation of the contamination of groundwater in piezometers of the landfills and in neighbouring tubular wells. This possibility was first investigated in Brazil for sanitary landfills in the region of Belo Horizonte City. Tritium levels together with the content of metals present in water and the measurement of soil electrical conductivity, proved to be valuable for these studies and also as a tracer for hydrodynamic studies of the surface water in the Ressaca creek.     

Current control of unbalanced electrical systems

The vector modeling approach is employed to describe the behavior of unbalanced three-phase (three-wire), unbalanced two-phase and single-phase systems. In the case of single-phase systems, a fictitious circuit is introduced in order to create the vector model. Continuous-time and discrete-time current controllers based on the vector approach are presented. The current control scheme is based on two controllers, one for the positive sequence and another for the negative sequence. The controllers are implemented in the synchronous reference frame and in the stationary reference frame. In the stationary reference frame, the use of the same integral gains for both controllers simplifies the equations of the control law especially for single-phase systems. Simulation and experimental results obtained with a pulsewidth modulation voltage-source inverter supplying unbalanced systems are presented     

Write–Read–Erase Molecular‐Switching System Trapped in a Polymer Hydrogel Matrix

In this paper we report the encapsulation of the compound 4′,7‐dihydroxyflavylium in a water‐permeable crosslinked poly(2‐hydroxyethyl methacrylate) matrix. The water permeability of the polymer and its transparency allow the use of pH and light stimuli to attain different states on the network defined by the various chemical reactions (multistate/multifunctional system). Unlike in water, in the polymer the compound 4′,7‐dihydroxyflavylium encapsulated exhibits a thermal barrier between the cis‐ and trans‐chalcones, a necessary requirement to define a write–read–erase cycle.     

Influence of anthocyanins and derivative pigments from blueberry (Vaccinium myrtillus) extracts on MPP intestinal uptake: A structure–activity approach

The aim of the present study was to investigate the influence of an anthocyanin extract (extract I), and two other derivative extracts (extracts II and III), which are being developed aiming to be further applied in the food industry, on intestinal uptake of organic cations. For this purpose, the effect of these compounds on ³H-MPP⁺ uptake was evaluated in Caco-2 cells (an enterocyte-like cell line derived from a human colonic adenocarcinoma).