The High Temperature Properties of Mar-M Alloy 509

Mar-M alloy 509 is a contemporary Co-base alloy intended for constructional use in a corrosive environment at high temperature. This paper is the result of a continuing investigation to evaluate mechanical, process and physical parameters of this alloy system. The alloy exhibits low room-temperature ductility; heat treatments can improve ductility but will reduce rupture life at moderate stress and temperature (25ksi, 1600°F.) Mar-M alloy 509 exhibits good oxidation resistance to 1900°F and excellent hot-corrosion resistance at 1600°F. The flat negative slope of the Mar-M alloy 509 stress-rupture curve also indicates a high degree of phase stability.     

Directed assembly of metal-cyanide cluster magnets

The simple, well-understood coordination chemistry of the cyanide ligand is of significant utility in the design of new single-molecule magnets. Its preference for bridging two transition metals in a linear M'-CN-M geometry permits the use of multidentate blocking ligands in directing the assembly of specific molecular architectures. This approach has been employed in the synthesis of numerous high-nuclearity constructs, including simple cubic M4M'4(CN)12 and face-centered cubic M8M'6(CN)24 coordination clusters, as well as some unexpected cluster geometries featuring as many as 27 metal centers. The ability to substitute a range of different transition metal ions into these structures enables adjustment of their magnetic properties, facilitating creation of high-spin ground states with axial magnetic anisotropy. To date, at least four different cyano-bridged single-molecule magnets have been characterized, exhibiting spin-reversal barriers as high as 25 cm(-1). Ultimately, it is envisioned that this strategy might lead to molecules possessing much larger barriers with the potential for storing information at more practical temperatures.     

Molecular motions in poly(vinyl acetate) revisited. A thermally stimulated current study

The dipolar relaxation mechanisms in poly(vinyl acetate) have been studied in detail using the technique of thermally stimulated currents. The papers published in the literature about this subject are very contradictory, particularly with respect to the assignment of the observed discharges to the corresponding motions at the molecular level. This work aims at clarifying these problems. We detected and characterised three different relaxation mechanisms: (1) a low temperature one (around ?140°C) which was attributed to local internal rotations in the acetate side-groups; (2) a relaxation whose maximum occurs at 42°C, which corresponds to the glass transition relaxation, and shows a compensation behaviour; (3) an upper glass transition relaxation whose maximum appears at 87°C and was attributed to a liquid-liquid transition. These assignments have been made on the basis of the analysis of the behaviour of the samples when submitted to different thermal and electrical treatments.     

Using liquid superheating energy for a quick estimation of overpressure in BLEVEs and similar explosions

A method is proposed for the quick estimation of the peak overpressure caused by a Boiling Liquid Expanding Vapor Explosion (BLEVE) or a similar explosion. The method is based on the use of the "superheating energy" (SE), which is the difference between the specific enthalpy of the liquid at the temperature just before the explosion and the specific enthalpy of the liquid at its saturation temperature, at atmospheric pressure. The analysis performed with a set of reference substances showed that in a BLEVE or in similar explosions, the energy converted into overpressure will range between 3.5 and 14% of SE. The comparison of the values thus obtained with experimental data from the literature shows a fairly good agreement.     

Hydroxyapatite Modified with Carbon‐Nanotube‐Reinforced Poly(methyl methacrylate): A Nanocomposite Material for Biomedical Applications

The paper reports on a freeze‐granulation technique to prepare a novel nanocomposite of poly(methyl methacrylate) (PMMA)‐modified hydroxyapatite (HA) with multiwalled carbon nanotubes (MWCNTs) as reinforcement for a new generation biomedical bone cement and implant coatings. By using this technique it is possible to increase material homogeneity and also enhance the dispersion of MWCNTs in the composite matrix. The phase composition and the surface morphology of the nanocomposite material were studied using X‐ray diffraction, field‐emission scanning electron microscopy, and micro‐Raman spectroscopy. Additionally, nanomechanical properties of different concentrations of MWCNT‐reinforced nanocomposite were performed by a nanoindentation technique, which indicates that a concentration of 0.1 wt % MWCNTs in the PMMA/HA nanocomposite material gives the best mechanical properties.     

Surface Engineered Carboxymethylchitosan/Poly(amidoamine) Dendrimer Nanoparticles for Intracellular Targeting

Novel highly branched biodegradable macromolecular systems have been developed by grafting carboxymethylchitosan (CMCht) onto low generation poly(amidoamine) (PAMAM) dendrimers. Such structures organize into sphere‐like nanoparticles that are proposed to be used as carriers to deliver bioactive molecules aimed at controlling the behavior of stem cells, namely their proliferation and differentiation. The nanoparticles did not exhibit significant cytotoxicity in the range of concentrations below 1 mg mL^?1, and fluorescent probe labeled nanoparticles were found to be internalized with highly efficiency by both human osteoblast‐like cells and rat bone marrow stromal cells, under fluorescence‐activated cell sorting and fluorescence microscopy analyses. Dexamethasone (Dex) has been incorporated into CMCht/PAMAM dendrimer nanoparticles and release rates were determined by high performance liquid chromatography. Moreover, the biochemical data demonstrates that the Dex‐loaded CMCht/PAMAM dendrimer nanoparticles promote the osteogenic differentiation of rat bone marrow stromal cells, in vitro. The nanoparticles exhibit interesting physicochemical and biological properties and have great potential to be used in fundamental cell biology studies as well as in a variety of biomedical applications, including tissue engineering and regenerative medicine.     

Production and characterization of recombinant cyprosin B in Saccharomyces cerevisiae (W303-1A) strain

The Saccharomyces cerevisiae W303-1A strain transformed with a centromeric plasmid containing CYPRO11, which codifies the aspartic protease cyprosin B, was grown in a 3 l bioreactor under aerobic conditions. Expression of cyprosin B is directly dependent on the concentration of galactose used as the inducer and carbon source in 1% yeast extract, 2% bactopeptone, and 4% galactose in culture medium. For 4% of galactose, 209 mg.l(-1) total protein, and 1036 U.ml(-1) recombinant cyprosin B activity were obtained from 6.1 g dcw.l(-1) biomass. The recombinant cyprosin B, purified by two consecutive anion-exchange chromatographies (diethyl amino-ethyl [DEAE]-Sepharose and Q-Sepharose XK-16 columns), shows a specific activity of 62 x 10(3) U.mg(-1), corresponding to a purification degree of 12.5-fold and a recovery yield of 25.6% relative to that in fermentation broth. The proteolytic activity of recombinant cyprosin B is optimal at 42 degrees C and pH 4.5. The recombinant cyprosin B activity is 95% inhibited by pepstatin A, which confirms its aspartic protease nature. The pure recombinant cyprosin B is composed of two subunits, one with 14 and the other with 32 kDa. It exhibits clotting activity, similar to that of the natural enzyme from Cynara cardunculus flowers. The results reported here show that recombinant cyprosin B, the first clotting protease of plant origin produced in a bioreactor, can now be produced in large scale and may constitute a new and efficient alternative to enzymes of animal or fungal origin that are widely used in cheese making.     

Reduction of low voltage power cables electromagnetic field emission in MV/LV substations

In this paper a solution to reduce magnetic field emission levels generated by MV/LV substation power cables is proposed. The reduction is obtained by the arrangement of the phases in a proper way and by shielding the cables with magnetic or conductive materials. The effects introduced by these two options have been analyzed by means of simulations, using finite elements method calculation software, and by experimental measurements. The introduced results allow selecting an optimal arrangement and the best screening material in order to reduce the magnetic fields in those directions required to protect.     

Foliar Spraying of Silicon Associated with Salicylic Acid Increases Silicon Absorption and Peanut Growth

Silicon - Silicon (Si) combined with foliar spraying of salicylic acid (SA) can affect the absorption of this beneficial element. A study with Si non-accumulators plants (soybean and bean) observed...