Using chromium stable isotope ratios to quantify Cr(VI) reduction: lack of sorption effects

Chromium stable isotope values can be effectively used to monitor reduction of Cr(VI) in natural waters. We investigate effects of sorption during transport of Cr(VI) which may also shift Cr isotopes values, complicating efforts to quantify reduction. This study shows that Cr stable isotope fractionation caused by sorption is negligible. Equilibrium fractionation of Cr stable isotopes between dissolved Cr(VI) and Cr(VI) adsorbed onto gamma-Al2O3 and goethite is less than 0.04 per thousand (53Cr/52Cr) under environmentally relevant pH conditions. Batch experiments at pH 4.0 and pH 6.0 were conducted in series to sequentially magnify small isotope fractionations. A simple transport model suggests that adsorption may cause amplification of a small isotope fractionation along extreme fringes of a plume, leading to shifts in 53Cr/52Cr values. We therefore suggest that isotope values at extreme fringes of Cr plumes be critically evaluated for sorption effects. A kinetic effect was observed in experiments with goethite at pH 4 where apparently lighter isotopes diffuse into goethite clumps at a faster rate before eventually reaching equilibrium. This observed kinetic effect may be important in a natural system that has not attained equilibrium and is in need of further study. Cr isotope fractionation caused by speciation of Cr(VI) between HCrO4- and CrO4(2-) was also examined, and we conclude that it is not measurable. In the absence of isotope fractionation caused by equilibrium speciation and sorption, most of the variation in delta53Cr values may be attributed to reduction, and reliable estimates of Cr reduction can be made.     

Thermodynamic Modeling of the Miscibility Gaps and the Metastable Liquidi in the MgO-SiO2, CaO-SiO2, and SrO-SiO2 Systems

A range of compositions and temperatures below the monotectic temperature exists where there are thermodynamic restrictions that prevent the equilibrium solid from forming directly from the undercooled homogeneous liquid. In this region, the solid can form only after liquid-liquid phase separation has occurred. As suggested by earlier research, the thermodynamic restrictions on the crystallization process may be useful to control the crystallized grain structure in glass-ceramic systems. Thus, understanding the thermodynamic limitations on the formation of the solid in monotectic systems could have commercial significance. In the present paper, the metastable liquidus boundaries, liquid miscibility gaps, and spinodal curves in binary MgO-SiO₂, CaO-SiO₂, and SrO-SiO₂ systems are calculated by using analytical expressions for the Gibbs free energies of the liquid phases. Calculating the metastable liquidus rather than using a simple extrapolation as originally proposed in the aforementioned previous research provides greater control of the heat-treatment processes and, thus, greater control over the resulting microstructure.     

Lipoxygenase Products in the Urine Correlate with Renal Function and Body Temperature but not with Acute Transplant Rejection

Acute transplant rejection is the leading cause of graft loss in the first months after kidney transplantation. Lipoxygenase products mediate pro- and anti-inflammatory actions and thus we aimed to correlate the histological reports of renal transplant biopsies with urinary lipoxygenase products concentrations to evaluate their role as a diagnostic marker. This study included a total of 34 kidney transplant recipients: 17 with an acute transplant rejection and 17 controls. LTE4, LTB4, 12-HETE and 15-HETE concentrations were measured by enzyme immunoassay. Urinary lipoxygenase product concentrations were not significantly changed during an acute allograft rejection. Nevertheless, LTB4 concentrations correlated significantly with the body temperature (P ≤ 0.05) 3 months after transplantation, and 12- and 15-HETE concentrations correlated significantly with renal function (P ≤ 0.05) 2 weeks after transplantation. In conclusion, our data show a correlation for LTB4 with the body temperature 3 months after transplantation and urinary 12- and 15-HETE concentrations correlate positively with elevated serum creatinine concentrations but do not predict acute allograft rejection.     

Draft angle and surface roughness effects on stereolithography molds

Stereolithography (SL) is a rapid prototyping process, which allows one to build complex shapes quickly. Current research investigates the possibilities of using this process to make injection molds. This would allow designers to manufacture and test molds easily and rapidly. One of the main issues with this technique is the effects of its surface on the part. Molds built by SL have high roughness. This gives rise to a high friction force between the part and the mold, and increases the ejection force needed to eject the part from the mold. High ejection forces often lead to damage or breakage of the part and the mold. Research was undertaken on the effects of draft angle and roughness on ejection forces. It was found that increasing the draft angle does not necessary assist the ejection of the part. As the draft angle increases, the roughness and hence the friction force between the part and the mold also increase. There is a trade‐off between draft angle and roughness. A model based on Glanvill's equation was developed to predict ejection force and was consistent with experimental results.     

Estimation of the costs of acute gastrointestinal illness in British Columbia, Canada

The costs associated with gastrointestinal infection (GI) in the province of British Columbia, Canada, were estimated using data from a population-based survey in three health service delivery areas, namely Vancouver, East Kootenay and Northern Interior. The number of cases of disease, consequent expenditure of resources and associated economic costs were modeled as probability distributions in a stochastic model. Using 2004 prices, the estimated mean annual cost per capita of gastrointestinal infection was CAN$128.61 (euro207.96), with a mean annual cost per case of CAN$1,342.57 (euro2,170.99). The mean estimate of the overall economic burden to British Columbia was CAN$514.2 million (euro831.5 million) (95% CFI CAN$161.0 million to CAN$5.8 billion; euro260.3 million to euro9.38 billion). The major element of this cost was the loss of productivity associated with time away from paid employment by both the sick and their caregivers. Sensitivity analysis suggested that the uncertainty associated with the base model assumptions did not significantly affect the estimates. The results are comparable to those obtained in an earlier study using a similar analytical framework and data from the city of Hamilton, Ontario, Canada.     

Pressure death and tailing behavior of Listeria monocytogenes strains having different barotolerances

The objectives of this study were to investigate the variability among Listeria monocytogenes strains in response to high-pressure processing, identify the most resistant strain as a potential target of pressure processing, and compare the inactivation kinetics of pressure-resistant and pressure-sensitive strains under a wide range (350 to 800 MPa) of pressure treatments. The pressure resistance of Listeria innocua and nine strains of L. monocytogenes was compared at 400 or 500 MPa and 30 degrees C. Significant variability among strains was observed. The decrease in log CFU/ml during the pressure treatment was from 1.4 to 4.3 at 400 MPa and from 3.9 to >8 at 500 MPa. L. monocytogenes OSY-8578 exhibited the greatest pressure resistance, Scott A showed the greatest pressure sensitivity, and L. innocua had intermediate resistance. On the basis of these findings, L. monocytogenes OSY-8578 is a potential target strain for high-pressure processing efficacy studies. The death kinetics of L. monocytogenes Scott A and OSY-8578 were investigated at 350 and 800 MPa. Survivors at 350 MPa were enumerated by direct plating, and survivors at 800 MPa were enumerated by the most-probable-number technique. Both pressure-resistant and pressure-sensitive strains exhibited non-first-order death behavior, and excessive pressure treatment did not eliminate the tailing phenomenon.     

Direct quantification of topological protection in symmetry-protected photonic edge states at telecom wavelengths

Topological on-chip photonics based on tailored photonic crystals(PhCs)that emulate quantum valley-Hall effeas has recently gained widespread interest owing to its promise of robust unidirectional transport of classical and quantum information.We present a direct quantitative evaluation of topological photonic edge eigenstates and their transport properties in the telecom wavelength range using phase-resolved near-field optical microscopy.Experimentally visualizing the detailed sub-wavelength structure of these modes propagating along the interface between two topologically non-trivial mirror-symmetric lattices allows us to map their dispersion relation and differentiate between the contributions of several higher-order Bloch harmonics.Selective probing of forward-and backward-propagating modes as defined by their phase velocities enables direct quantification of topological robustness.Studying near-field propagation in controlled defects allows us to extract upper limits of topological protection in on-chip photonic systems in comparison with conventional PhC waveguides.We find that protected edge states are two orders of magnitude more robust than modes of conventional PhC waveguides.This direct experimental quantification of topological robustness comprises a crucial step toward the application of topologically protected guiding in integrated photonics,allowing for unprecedented error-free photonic quantum networks。     

Preparation of Benzylamine by Highly Selective Reductive Amination of Benzaldehyde Over Ru on an Acidic Activated Carbon Support as the Catalyst

Platinum particles (<1.5 nm) have been shown to behave as bases in their interaction with -alumina. FTIR spectra of adsorbed pyridine probe molecules showed that the acid strength of the -alumina was decreased by the presence of (<1.5 nm) Pt particles. Ammonium chloride treatment converts the primary Pt clusters to H _x Pt _y Cl _z intermediates that de-anchor from the support. Consequently, agglomeration to 8 nm Pt particles was observed following treatment in hydrogen at a relatively mild temperature. For the treated catalyst the IR data of absorbed pyridine show a 3 cm^-1 increase relative to the original Pt/-Al₂O₃ catalyst, indicating a strengthening of the acidity. Changes in the Pt particle size were confirmed by FTIR spectroscopy of CO absorbed onto the Pt particles before and after treatment. Consecutive CO and pyridine probe adsorption demonstrated the electronic interplay between the Pt particles and the support. Pyridine adsorption onto the -alumina support of a Pt/Al₂O₃ catalyst pre-dosed with CO produces a nearly 40 cm^-1 lowering of the CO peak position, indicative of CO bond weakening. In the case of CO adsorbed onto a catalyst pre-dosed with pyridine, a shift in the pyridine IR spectrum was only observed from the original highly dispersed catalyst.     

Polymorph selection by continuous crystallization

This article is motivated by a remarkable observation reported recently by Myerson, Trout, and co‐workers that continuous crystallization is capable of producing metastable polymorphs in stable steady‐state operation. We explain why this phenomenon occurs and give simple design rules for reproducing it in other polymorphic systems. A linear stability analysis gives simple functions of parameters for which one can continuously produce thermodynamically metastable products based only on the relative polymorph dynamics. We demonstrate agreement with two sets of experimental data; L‐glutamic acid grown from aqueous solution and p‐aminobenzoic acid also grown from aqueous solution. For many polymorphic compounds, engineering a process to produce a desired polymorph is as simple as finding a reasonable operating point for the continuous mixed‐suspension mixed‐product removal crystallization process (temperature, residence time, initial supersaturation, etc.) according to the rules reported in this article. © 2016 American Institute of Chemical Engineers AIChE J, 62: 3505–3514, 2016