Experimental Investigation of the Froth Height in Columns with Sandwich Packings

Sandwich packings, consisting of alternatingly stacked conventional structured packings with different geometric surface areas, are promising for increasing capacity and efficiency of separation columns. Film flow and froth flow evolve along a stack, which requires comprehensive fluid dynamic analysis. In particular, the froth height is an essential parameter to determine the spatial extent of the flow regimes. Ultrafast X‐ray tomography and a 3D‐printed pressure drop profile measurement module were applied to independently estimate this parameter. The results are compared with existing correlations.     

Phosphorylated sodium alginate/APP/DPER intumescent flame retardant used for polypropylene

Flame-retardant polypropylene (FR-PP) materials are realized by use of natural-sourced flame-retardant materials. Phosphorylated sodium alginate, ammonium polyphosphate, and dipentaerythritol are used to create an intumescent flame retardant (IFR). This realized flame retardant is embedded into polypropylene (PP) through melt blending method. The components, chemical structures, thermal properties, and degradation mechanisms of the samples are characterized by infrared spectrometry, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, and cone calorimeter test. The results indicate that an effective IFR is obtained due to gas phase and condensed phase synergistic flame-retardant ability during combustion and degradation of FR-PP. This work presents a facile method for preparing FR-PP with efficient flame retardancy. This study is a first proof of concept for an innovative flame retardant, which could find application in future in the fields of automotive industry and the construction of electronic devices. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47794.     

The effect of dietary forage to concentrate ratio and forage type on milk fatty acid composition and milk fat globule size of lactating cows

We examined the effects of 2 grass silage-based diets differing in forage:concentrate (FC) ratio and those of a red clover silage-based diet on intake, milk production, ruminal fatty acid (FA) biohydrogenation, milk FA composition, and milk fat globule (MFG) size distribution. Ten multiparous Nordic Red cows received the following treatments: grass silage-based diets containing high (70:30, HG) or low (30:70, LG) FC ratio or a red clover silage-based diet with an FC ratio of 50:50 (RC) on a dry matter basis. Determinations of MFG were performed from fresh milk samples without addition of EDTA so the results of fat globules >1 µm in diameter are emphasized instead of the entire globule population. Lower FC ratio in grass silage-based diets increased milk production with no effect on daily fat yield, leading to 13% lower milk fat concentration. The effect of FC ratio on MFG size was moderate. It did not affect the volume-weighted diameter in grass silage-based diets, although LG lowered the volume-surface diameter of MFG in the size class >1 µm compared with HG. Compared with HG, feeding LG moderately decreased the biohydrogenation of 18:2n-6, leading to a higher level of polyunsaturated fatty acids in milk fat. Feeding RC lowered milk fat concentration and daily milk fat yield compared with grass silage-based diets. The volume-weighted diameter of MFG in the size class >1 µm was smaller in RC milk compared with grass silage-based diets. Feeding RC increased the flow of 18:3n-3 at the omasum by 2.4-fold and decreased the apparent ruminal 18:3n-3 biohydrogenation compared with grass silage-based diets despite similar intake of 18:3n-3. It also resulted in the lowest amount of saturated FA and the highest amounts of cis-9 18:1, 18:3n-3, and polyunsaturated FA in milk. In conclusion, LG decreased milk fat content and induced minor changes in MFG size distribution compared with HG, whereas RC lowered milk fat production, altered milk FA composition to nutritionally more beneficial direction, and led to smaller MFG compared with grass silage-based diets.     

Fabrication of ceramic particles from preceramic polymers using stop flow lithography

Stop flow lithography (SFL) combines aspects of microfluidic and photolithography to continuously fabricate particles with uniform planar shapes as dictated by a mask. In this work we aim to expand the palette of materials suitable for SFL processing by investigating the use of UV-crosslinkable preceramic polymers to make ceramic particles. A commercially available methacrylated-polysiloxane was used as the preceramic polymer and was mixed with 2.5 wt% Irgacure 651 photoinitiator. A simple SFL system was assembled to continuously fabricate UV-crosslinked preceramic polymer particles in the shape of hexagons, triangles, and gears with diameters ranging from 100 to 200 μm and thicknesses of 74 μm +/- 4 μm. Particles were harvested from the excess preceramic solution, cleaned and then pyrolyzed at 1000 °C to transform them into silicon oxycarbide ceramic particles. Particle shape was maintained during pyrolysis despite a ～80 % linear shrinkage due to the removal of acryl and methyl side groups, as confirmed via FTIR. After pyrolysis the outer diameters of the SiOC particles ranged from 20 to 40 μm with thicknesses of 10 μm–12 μm. Pyrolyzed particles were successfully recovered and dispersed in water. This work demonstrates a robust path for the fabrication of ceramic particles with specific shapes from preceramic polymers via SFL.     

Evaluation of the pore morphology formation of the Freeze Foaming process by in situ computed tomography

The so-called Freeze Foaming method aims at manufacturing ceramic cellular scaffolds for diverse applications. One application is dedicated to potential bone replacement material featuring open, micro and interconnected porosity. However, the main challenges of this foaming method is to achieve a homogeneous pore morphology. In a current project, the authors throw light on the bubble/pore and strut formation of this process by in situ computed tomography. This allows for evaluating varying process parameter’s effects on the growth of the ceramic foam during the foaming process. As first result and basis for CT analysis, a stable and reproducible model suspension was developed which resulted in reproducible foam structures. In dependence of selected process parameters like pressure reduction rate or air content in the ceramic suspension resulting Freeze Foams became adjustable with regard to their pore morphology. Pore size and distribution data as well as the porosity were characterized and evaluated accordingly.     

Phase portraits of Abel quadratic differential systems of second kind with symmetries

We provide normal forms and the global phase portraits on the Poincaré disk of the Abel quadratic differential equations of the second kind having a symmetry with respect to an axis or to the origin. Moreover, we also provide the bifurcation diagrams for these global phase portraits.