Simulations for the Development of Thermoelectric Measurements

In thermoelectricity, continuum theoretical equations are usually used for the calculation of the characteristics and performance of thermoelectric elements, modules or devices as a function of external parameters (material, geometry, temperatures, current, flow, load, etc.). An increasing number of commercial software packages aimed at applications, such as COMSOL and ANSYS, contain vkernels using direct thermoelectric coupling. Application of these numerical tools also allows analysis of physical measurement conditions and can lead to specifically adapted methods for developing special test equipment required for the determination of TE material and module properties. System-theoretical and simulation-based considerations of favorable geometries are taken into account to create draft sketches in the development of such measurement systems. Particular consideration is given to the development of transient measurement methods, which have great advantages compared with the conventional static methods in terms of the measurement duration required. In this paper the benefits of using numerical tools in designing measurement facilities are shown using two examples. The first is the determination of geometric correction factors in four-point probe measurement of electrical conductivity, whereas the second example is focused on the so-called combined thermoelectric measurement (CTEM) system, where all thermoelectric material properties (Seebeck coefficient, electrical and thermal conductivity, and Harman measurement of zT) are measured in a combined way. Here, we want to highlight especially the measurement of thermal conductivity in a transient mode. Factors influencing the measurement results such as coupling to the environment due to radiation, heat losses via the mounting of the probe head, as well as contact resistance between the sample and sample holder are illustrated, analyzed, and discussed. By employing the results of the simulations, we have developed an improved sample head that allows for measurements over a larger temperature interval with enhanced accuracy.     

Modification of emission wavelength in organic random lasers based on photonic glass

Control of the emission wavelength of a random laser (RL) system over a 7-nm waveband is demonstrated using a green-emitting π-conjugated polymer infiltrated into a photonic glass formed by nano/micro-size monodisperse silica spheres. The use of a solution-based conjugated polymer enables the complete filling of the voids within the photonic glass without suffering from quenching and the gain can therefore be maximized. The emission wavelength of these structures is set by a combination of the material system spectral gain and of the transport mean free path, the latter being controlled by the mean diameter of the spheres in the nano-scale range. Transport mean free paths of photons in the RL’s active region are calculated using Mie scattering theory and corroborated with coherent backscattering measurements. Further wavelength modification is also possible by changing the pump spot size and the pump fluence.     

Inverse Design of Mechanical Metamaterials That Undergo Buckling

Metamaterials are man‐made materials which get their properties from their structure rather than their chemical composition. Their mesostructure is specifically designed to create functionalities not found in nature. However, despite the broad variety of metamaterials developed in recent years, a straightforward procedure to design these complex materials with tailored properties has not yet been established. Here, the inverse design problem is tackled by introducing a general optimization tool to explore the range of material properties that can be achieved. Specifically, a stochastic optimization algorithm is applied and its applicability to disjoint problems is demonstrated, with a focus on tuning the buckling properties of mechanical metamaterials, including experimental verification of the predictions. Besides this problem, this algorithm can be applied to a large variety of systems that, because of their complexity, would be challenging otherwise. Potential applications range from the design of optomechanical resonators, acoustic band gap materials, to dielectric metasurfaces.     

Design and analysis of UW-OFDM signals

Unique word-orthogonal frequency division multiplexing (UW-OFDM) is a novel signaling concept where the guard interval is implemented as a deterministic sequence, the so-called unique word. The UW is generated by introducing a certain level of redundancy in the frequency domain. Different data estimation strategies and the favourable bit error ratio (BER) performance of UW-OFDM, as well as comparisons to competing concepts have already extensively been discussed in previous papers. This work focuses on the different possibilities on how to generate UW-OFDM signals. The optimality of the two-step over the direct approach in systematic UW-OFDM is proved analytically, we present a heuristic algorithm that allows a fast numerical optimization of the redundant subcarrier positions, and we show that our original intuitive approach of spreading the redundant subcarriers in systematically encoded UW-OFDM by minimizing the mean redundant energy is practically also optimum w.r.t. transceiver based cost functions. Finally, we derive closed form approximations of the statistical symbol distributions on individual subcarriers as well as the redundant energy distribution and compare them with numerically found results.     

OFDM with reduced peak-to-average power ratio by multiple signal representation

In this paper two highly effective, flexible and distortionless peak power reduction schemes for orthogonal frequency division multiplexing (ofdm) with low amount of additional complexity and almost vanishing redundancy are presented. The schemes work with arbitrary numbers of subcarriers and signal sets. The first approach generates a set of several alternative multicarrier signals and selects that transmit signal with the lowest peak power value. The second method optimally combines partial transmit sequences to minimize the peak-to-average power ratio (PAR-coefficient). The schemes are analyzed theoretically and their performance is covered by simulations.     

Smart Antennas with Two-Dimensional Array Configurations for Performance Enhancement of a Joint Detection CDMA Mobile Radio System

Smart antennas for base stations of cellular mobile radio systems offer the potential of system performance enhancement by taking advantage of the directionally inhomogeneous signal reception at the receiver. In this paper, two-dimensional array configurations employed at the uplink receiver of a joint detection CDMA (JD-CDMA) mobile radio system are investigated. This smart antenna concept can be split up into a novel channel estimator and data detector which incorporate explicitely the information of the direction-of-arrival (DOA) of signals emerging from users assigned to the considered base station. Proceeding from channel models that model the directional inhomogeneity of the mobile radio channel with single DOAs, the link level performance of a JD-CDMA mobile radio system using this smart antenna concept is evaluated for the rural propagation environment. The performance evaluation is based on Monte Carlo simulations of data transmission and average bit error rates versus the average signal to noise ratio per net information bit are presented for different array configurations. Although these results should be considered as upper bounds for the link level performance, they reveal the advantages of implementing two-dimensional array configurations at the uplink receiver of a JD-CDMA mobile radio system.     

Substrate-Independent and Re-Writable Surface Patterning by Combining Polydopamine Coatings,Silanization, and Thiol-Ene Reaction

Polydopamine coating is a unique, simple, and substrate-independent surface functionalization strategy. Techniques for secondary functionalization, patterning, and re-functionalization of polydopamine modified materials are important to broaden the scope of applications of such materials in a variety of fields. Here, a facile and substrate-independent strategy for surface functionalization and patterning is presented. This approach combines the advantages of three important methods: facile and substrate-independent polydopamine coating, versatile gas phase silanization, and rapid thiol-ene photoclick reaction for patterning. They demonstrate equally efficient functionalization and patterning of diverse materials, such as glass, polytetrafluoroethylene, aluminum, polypropylene, or polyethylene. They also show the possibility of controlled chemical removal of the patterns or surface functionalization by treatment with tetrabutylammonium fluoride, which allows re-modification or re-patterning of the substrate. Thus, this universal and powerful approach for substrate independent surface modification and patterning can significantly facilitate the development of novel functional materials and devices useful for various applications.     

Solvent‐Induced Morphology in Polymer‐Based Systems for Organic Photovoltaics

Studies on the influence of four different solvents on the morphology and photovoltaic performance of bulk‐heterojunction films made of poly(3‐hexylthiophene) (P3HT) and [6,6]‐phenyl‐C₆₁ butyric acid methyl ester (PCBM) via spin‐coating for photovoltaic applications are reported. Solvent‐dependent PCBM cluster formation and P3HT crystallization during thermal annealing are investigated with optical microscopy and grazing‐incidence wide‐angle X‐ray scattering (GIWAXS) and are found to be insufficient to explain the differences in device performance. A combination of atomic force microscopy (AFM), X‐ray reflectivity (XRR), and grazing‐incidence small‐angle X‐ray scattering (GISAXS) investigations results in detailed knowledge of the inner film morphology of P3HT:PCBM films. Vertical and lateral phase separation occurs during spin‐coating and annealing, depending on the solvent used. The findings are summarized in schematics and compared with the IV characteristics. The main influence on the photovoltaic performance arises from the vertical material composition and the existence of lateral phase separation fitting to the exciton diffusion length. Absorption and photoluminescence measurements complement the structural analysis.     

Channel Sounding System for MM-Wave Bands and Characterization of Indoor Propagation at 28 GHz

The aim of this work is to present a vector network analyzer based channel sounding system capable of performing measurements in the range from 2 to 50 GHz. Further, this paper describes an indoor measurement campaign performed at 26–30 GHz. The sounding system is capable of receiving two channels and transmitting one. Using this feature a channel measurement has been performed using both a directional horn antenna and a virtual uniform circular array (UCA) at the same time. This allows for comparative studies of measured channels with two different antennas in a simultaneous way. The measurement has been conducted with 42 measurement positions distributed along a 10 m long path through an indoor laboratory environment. The transmitter was positioned such that measurements were conducted both in line-of-sight and non-line-of-sight scenarios. The measurements showed good agreement between the measurement data collected with the horn antenna and the data collected with the UCA. The propagation environment was found to be sparse both in delay and angular domain for the given scenario. Based on the performed measurement campaign together with validation measurements of the system stability, it is found that the system works as expected.