Photovoltaics as a demand-side management technology: An analysis of peak-shaving and direct load control options

For photovoltaic (PV) technology to play an increasing role in the utility sector at its present price, the technology needs to be developed in a manner that is consistent with, and takes advantage of, the economics of the demand-side management (DSM) market. High-value applications in this direction are for photovoltaics to perform a DSM function either as a direct load control (DLC) device or as a peak-shaving option, which has the effect of raising the end-use efficiency of customers' electrical equipment. This paper describes two PV-DSM applications involving a water heater and an air conditioner studied at a residential PV test facility, Solar One House, located on the campus of the University of Delaware. A single 55-W PV module directly connected to an electric water heater was found to offset standby and mixing losses, resulting in a 2°C increase in water temperature at the end of the afternoon compared to the standard DLC (grid-disconnected) case. A conservatively sized PV array without storage could meet the house air-conditioning load over 97% of the time from noon to 3 p.m., but only 69% from 3 p.m. to 6 p.m. If a PV system is combined with an air-conditioning cycling program, success rates for supply of an air-conditioning load are greatly increased, meeting almost 100% of the load between noon and 3 p.m. and 85% during 3 p.m. to 6 p.m. Furthermore, our results suggest that a modest-size PV array with storage could significantly shave peak air-conditioning loads during 3 p.m. to 6 p.m., thus reducing the peak demand faced by a utility. Preliminary analyses support the economic compatibility of a PV system as a DLC device or a peak-shaving tool.     

Critical conditions for wear in pivoted follower valve train systems

There are numerous wear problems associated with the use of pivoted cam follower valve train systems in modern high-speed automotive engines. These problems have led to the introduction of an increasing number of engines of this type as specification tests to assess the antiwear performance of lubricants. Critical conditions for wear in these systems have been identified by the application of a steady-wear process model to the kinematic analysis of the cam/follower contact cycle. The positions of maximum wear identified by this technique showed better agreement with worn engine components than the more commonly used criteria of maximum contact pressure and oil film thickness.     

An Objective Illustration of the Inadequacy of the Official EC “Ewers” Method for the Determination of Starch

The Ewers method for starch determination is currently the Official EEC method for measurement of starch purity. In this communication we demonstrate that the use of trifluroacetic acid for solubilisation of starch prior to polarimetric measurements is preferred over the use of mineral acids since the degree of hydrolytic degradation observed with this reagent was minimal compared to mineral acids, thereby giving improved starch purity values. Of particular concern we demonstrate that the Ewers method is non-specific in that the addition of an epichlorohydrin cross-linked dextran as an adulterant enhances the value of starch purity obtained. The Ewers method however was able to detect agarose and carboxymethyl cellulose added to starch as adulterants. It is concluded that the Ewers method is not an acceptably satisfactory method for starch purity measurement on which to base quality control or eligibility for rebate and refund schemes.     

Aurora Kinase A Is Involved in Controlling the Localization of Aquaporin-2 in Renal Principal Cells

The cAMP-dependent aquaporin-2 (AQP2) redistribution from intracellular vesicles into the plasma membrane of renal collecting duct principal cells induces water reabsorption and fine-tunes body water homeostasis. However, the mechanisms controlling the localization of AQP2 are not understood in detail. Using immortalized mouse medullary collecting duct (MCD4) and primary rat inner medullary collecting duct (IMCD) cells as model systems, we here discovered a key regulatory role of Aurora kinase A (AURKA) in the control of AQP2. The AURKA-selective inhibitor Aurora-A inhibitor I and novel derivatives as well as a structurally different inhibitor, Alisertib, prevented the cAMP-induced redistribution of AQP2. Aurora-A inhibitor I led to a depolymerization of actin stress fibers, which serve as tracks for the translocation of AQP2-bearing vesicles to the plasma membrane. The phosphorylation of cofilin-1 (CFL1) inactivates the actin-depolymerizing function of CFL1. Aurora-A inhibitor I decreased the CFL1 phosphorylation, accounting for the removal of the actin stress fibers and the inhibition of the redistribution of AQP2. Surprisingly, Alisertib caused an increase in actin stress fibers and did not affect CFL1 phosphorylation, indicating that AURKA exerts its control over AQP2 through different mechanisms. An involvement of AURKA and CFL1 in the control of the localization of AQP2 was hitherto unknown.     

Structure and properties of poly(p-xylylene) composites made by electrochemical and vapor deposition polymerization

Poly(para-xylylene)(PPX)/carbon fiber towpregs were produced by two different in-situ polymerization processes: Electrochemcal polymerization (ECP) and vapor deposition polymerization (VDP). The monomer used for the ECP process was α, α′ -dibromo-para-xylylene and di-para-xylylene was the starting material for the VDP process. A series of tests, including FTIR, WAXD, DSC, TG, and SEM were carried out to identify and compare these two composite towpregs. It has been confirmed that the PPX samples obtained by the two different polymerization processes were basically chemically identical. However, the polymer coating on the fiber surface produced by the VDP process was much smoother than that produced by the ECP process, which produced a porous coating.     

Investigation of radiation-induced surface activation effect in austenitic stainless steel under ultraviolet and γ-ray irradiations

The radiation-induced surface activation (RISA) effect will be applied to the core design in supercritical light water reactor (SCWR) in order to achieve a high performance with excellent economy and safety. The purpose of the present study is to investigate the RISA effect in the candidate fuel cladding materials in SCWR such as PNC1520. The change of weldability due to RISA effect and the related microstructure analysis were performed in oxidized PNC1520 and 304 stainless steel with various oxidization periods. The phases contained in the surface oxide layer of the present specimen were identified as Fe₂CrO₄, γ-Fe₂O₃, and Fe₂O₃. The lifetime of 13.8 days for wettability improving factor was confirmed in the ultraviolet (UV) irradiation. Meanwhile, the long life of 13.8 days and short life of 0.8 days for wettability improving factors were identified in the γ-ray irradiation. Based on the fact that the band gap energies of Fe₂CrO₄, γ-Fe₂O₃, and Fe₂O₃ were, respectively, 2.1, 2.0, and 2.2 eV, and the photo energies of UV and γ-ray irradiation were 4.48 eV and 13.3 MeV, it is therefore clarified that the hydrophilization on the oxide layer is ascribed to the RISA effect.