Use of weibull statistics to quantify property variability in TiAl alloys

Tensile experiments have been performed on specimens of four different investment-cast TiAl-based alloys with variations in casting conditions. The average ductilities obtained in these experiments vary between approximately 0.8 to 2.0 pct plastic strain to failure in tension. By using the three-parameter form of the Weibull relation, with the 0.2 pct offset yield strength as the minimum failure strength, the resulting variability in the data can be quantified and is found to be similar for those alloys with similar microstructural scale (grain size). Large variations in lamellar volume fraction, segregation, and phase distribution have a minor influence on property variability, compared to changes in the scale of the grain structure caused by either variations in cooling rate during casting or the addition of grain refiners.     

A comparison of three approaches for predicting C4 species cover of northern mixed grass prairie

The C4 composition of Canadian mixed-grass communities is more sensitive to environmental change than other grasslands. Reliable methods of detecting such changes are necessary if these landscapes are to be properly managed. One approach is to use satellite remote sensing systems. Various studies have shown that the asynchronous seasonality of C3 and C4 species allows the relative abundance of each photosynthetic type to be estimated using temporal trajectory indices (TTIs) of sensor-derived normalized difference vegetation index (NDVI). In this study, we compared three approaches for predicting C4 species cover at Grasslands National Park (GNP) (Saskatchewan, Canada). TTIs related to Approach I were calculated from plots of NDVI vs. day-of-year (DOY). TTIs related to Approach II were calculated from plots of normalized cumulative NDVI vs. growing degree day (GDD). TTIs related to Approach III were calculated as ratios of early-season NDVI to late-season NDVI. Our analyses were conducted at two separate ecological scales. A within-community analysis used field-sampled data from upland grassland to compare techniques at sampling resolutions of 0.5, 2.5, 10, and 50 m. An across-community analysis compared techniques using a vegetation survey of the GNP region and TTIs calculated from Advanced Very High Resolution Radiometer (AVHRR) data (1 km). At both scales, TTIs related to the timing of specific phenological events were the best predictors of C4 species cover. While all techniques performed well in the within-community study, Approach III performed best. Here, the predictive ability of each approach was weak at a resolution of 0.5 m but stronger at 2.5, 10, and 50 m resolutions. We also found that the optimal sampling dates for Approach III fell within a certain GDD range. This is encouraging for the a priori selection of sample dates, which would make the need for full seasonal time series redundant. In the across-community analysis, the AVHRR-derived Approach II TTIs were better able to discriminate among grasslands of different C4 composition than any other technique (overall accuracy=74%). However, for some C4 cover classes, the predictive accuracy of this approach was low. While these results are encouraging for the use of spectral data in monitoring the C4 cover of northern prairie, various research issues remain. At the within-community level, these include (a) further attempts to define objective criteria for the a priori identification of sampling dates for Approach III, and (b) and the extension of such studies to other growing seasons and community types/grassland regions. At the across-community level, these include the expansion of such techniques to a larger geographical region that contains a wider range in C4 cover values and land use types (e.g. ungrazed vs. grazed grasslands).     

The need for style systems in ODA

Many advanced document systems provide a formatting mechanism called ‘style sheets’ Style sheets provide a great deal of flexibility in describing a document's format, and allow easy maintenance of different house styles for a collection of documents. In this paper, we describe the basics of general style sheet systems, argue that successful document interchange must include the exchange of style sheet information, and evaluate ODA's style mechanism against this requirement.     

A One-Dimensional Nonlocal Damage-Plasticity Model for Ductile Materials

This paper presents a new 1-D non-local damage-plasticity deformation model for ductile materials. It uses the thermodynamic framework described in Houlsby and Puzrin (2000) and holds, nevertheless, some similarities with Lemaitre’s (1971) approach. A 1D finite element (FE) model of a bar fixed at one end and loaded in tension at the other end is introduced. This simple model demonstrates how the approach can be implemented within the finite element framework, and that it is capable of capturing both the pre-peak hardening and post-peak softening (generally responsible for models instability) due to damage-induced stiffness and strength reduction characteristic of ductile materials. It is also shown that the approach has further advantages of achieving some degree of mesh independence, and of being able to capture deformation size effects. Finally, it is illustrated how the model permits the calculation of essential work of rupture (EWR), i.e. the specific energy per unit cross-sectional area that is needed to cause tensile failure of a specimen.     

Hydrogen adsorption studies in micro-size cobalt dots

Hydrogen desorption curves were obtained from a sample composed of a square arrangement of Co dots with average diameter of 4.4 μm, separated by a distance of 11.6 μm. A macroscopic sample of Co dots grown on a 2.5 × 2.5 cm Si substrate was made by standard lithographic techniques and used in these experiments. Thermal programmed desorption (TPD) was performed under ultra-high vacuum conditions. Hydrogen TPD curves were obtained from a 1 × 1 cm Co dots samples displaying a maximum of intensity at 425 K. Hydrogen TPD curve was also obtained from 1 cm× 1 cm samples of Co films and Co foils for comparison. The hydrogen TPD curves have decreasing intensity from the Co foils to the Co dots and finally to the Co films. This indicates that there are more sites for hydrogen adsorption on the Co dots than in the Co films. This is a surprising result because there is approximately 8.7 times less Co atoms exposed in the Co dots that in the Co film sample. A desorption energy of 27 kcal/mol was obtained for the Co dots suggesting that hydrogen is adsorbed on an hcp hollow site of the Co dot crystalline structure.     

Neuropsychological functioning of girls with attention-deficit/hyperactivity disorder followed prospectively into adolescence: Evidence for continuing deficits?

The current study prospectively followed girls with attention-deficit/hyperactivity disorder (ADHD), along with a matched comparison sample, 5 years after childhood neuropsychological assessments. Follow-up neuropsychological measures emphasized attentional skills, executive functions, and language abilities. Paralleling childhood findings, the childhood-diagnosed ADHD group displayed moderate to large deficits in executive/attentional performance as well as in rapid naming relative to the comparison group at follow up (Mage 14.2 years). ADHD-inattentive versus ADHD-combined contrasts were nonsignificant and of negligible effect size, even when a refined, sluggish cognitive tempo subgroup of the inattentive type was examined. Although ADHD versus comparison group differences largely withstood statistical control of baseline demographics and comorbidities, control of childhood IQ reduced executive function differences to nonsignificance. Yet when the subset of girls meeting diagnostic criteria for ADHD in adolescence was compared with the remainder of the participants, neuropsychological deficits emerged even with full statistical control. Overall, childhood ADHD in girls portends neuropsychological and executive deficits that persist for at least 5 years. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Conditionals and conditional probability.

The authors report 3 experiments in which participants were invited to judge the probability of statements of the form if p then q given frequency information about the cases pq, p?q, ?pq, and ?p?q (where ? = not). Three hypotheses were compared: (a) that people equate the probability with that of the material conditional, 1 - P(p?q); (b) that people assign the conditional probability, P(q/p); and (c) that people assign the conjunctive probability P(pq). The experimental evidence allowed rejection of the 1st hypothesis but provided some support for the 2nd and 3rd hypotheses. Individual difference analyses showed that half of the participants used conditional probability and that most of the remaining participants used conjunctive probability as the basis of their judgments. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Characteristics of Milk Powders Produced by Spray Freeze Drying

Skim and whole milk powders were manufactured at lab scale by spray freeze drying (SFD), using liquid nitrogen as the cryogen. The polydispersity of droplet/particle sizes was limited using an encapsulator nozzle to atomize the feed. Particle morphology was examined using a scanning electron microscope. Samples were compared with equivalent spray-dried powders in tests of wettability and dissolution in water. The spray freeze-dried powders were found to be highly porous, with a uniform structure of pores throughout the entire particles. When tested in water, SFD skim milk powders wetted roughly three times as fast as industrially spray-dried agglomerated skim milk powders and were observed to dissolve rapidly by breaking down into smaller particles.     

Analysis of the Datagram Congestion Control Protocol’s connection management procedures using the sweep-line method

State space explosion is a key problem in the analysis of finite state systems. The sweep-line method is a state exploration method which uses a notion of progress to allow states to be deleted from memory when they are no longer required. This reduces the peak number of states that need to be stored, while still exploring the full state space. The technique shows promise but has never achieved reductions greater than about a factor of 10 in the number of states stored in memory for industrially relevant examples. This paper discusses sweep-line analysis of the connection management procedures of a new Internet standard, the Datagram Congestion Control Protocol (DCCP). As the intuitive approaches to sweep-line analysis are not effective, we introduce new variables to track progress. This creates further state explosion. However, when used with the sweep-line, the peak number of states is reduced by over two orders of magnitude compared with the original. Importantly, this allows DCCP to be analysed for larger parameter values. Somsak Vanit-Anunchai was partially supported by an Australian Research Council Discovery Grant (DP0559927) and Suranaree University of Technology. Guy Edward Gallasch was supported by an Australian Research Council Discovery Grant (DP0559927).     

P#: a concurrent Prolog for the .NET framework

We discuss P#, our implementation of a tool that allows interoperation between a concurrent superset of the Prolog programming language and C#. This enables Prolog to be used as a native implementation language for Microsoft's .NET platform. P# compiles a linear logic extension of Prolog to C# source code. We can thus create C# objects from Prolog and use C#'s graphical, networking and other libraries. We add language constructs on the Prolog side that allow concurrent Prolog code to be written. A primitive predicate is provided that evaluates a Prolog structure on a newly forked thread. Communication between threads is based on the unification of variables contained in such a structure. It is also possible for threads to communicate through a globally accessible table. All of the new features are available to the programmer through new built-in Prolog predicates. We discuss two software engineering tools implemented using P#. Copyright © 2004 John Wiley & Sons, Ltd.