Evaluation of a commercial process for collection and cooling of beef offals by a temperature function integration technique.

The hygienic adequacy of a commercial process for the collection and cooling of beef offals was assessed by a temperature function integration technique. The diverse operations for collection of offals were inspected. The rates of product movement through those operations, and the temperatures of products at the time of their being packed, were determined. From that information, four of the nine product types were selected for examination of their temperature histories during the assembly and cooling of the cartoned products. The products selected encompassed product at near-body and near-air-ambient temperatures at the time of packaging, product in the largest and smallest cartons used in the process, and product with relatively short and long residence times in an unchilled carton stack assembly area. Twenty-one temperature histories were collected for each of the products, and the possible proliferation of an indicator organism, Escherichia coli, calculated for each temperature history. The results were assessed against a temperature function integration criterion derived from studies of beef carcass and cartoned meat cooling processes. Products packaged at near-ambient temperature readily met with the criterion, but products packed at near-body temperatures did not comply. The latter non-compliance was extreme for product packaged in large cartons. However, the principal cause of non-compliance was identified as highly variable cooling conditions in the carton freezing facility. A brief survey of air speeds and temperatures within that facility indicated means by which product cooling could be better controlled.     

Precision and accuracy of total body bone mass and body composition measurements in the rat using x-ray-based dual photon absorptiometry

Lean body mass (LBM), total body bone mineral mass (BMC), total body bone areal density (BMD), and body fat mass (FM) were measured in rats by dual photon absorptiometry (DXA), using two different instruments. The coefficients of variation for repeated measurements of LBM and FM were about 0.4 and 2.5%, respectively, over an animal body weight range of 150 to 600 g. For BMC and BMD, the coefficients of variation were less than 2%. The correlation coefficients for LBM, FM, BMC, and BMD measured on the two densitometers were all greater than 0.94. The slope of the regression line relating LBM measured by DXA and LBM measured by carcass analysis was 0.999, and the correlation coefficient was 0.99. For FM the slope was 1.05, and the correlation coefficient was 0.98. BMC measures by DXA were falsely low in small animals. For larger animals, the correlation between BMC and ash weight was 0.93, but the slope of the regression line was 0.78. DXA measures of LBM and FM were accurate and reproducible for rats weighing between 150 and 600 g. There was a size-dependent error in BMC, which will be significant in longitudinal measurements of bone mass.     

Effects of a quick-release form of bromocriptine (Ergoset) on fasting and postprandial plasma glucose, insulin, lipid, and lipoprotein concentrations in obese nondiabetic hyperinsulinemic women

OBJECTIVE: To assess the effect on various aspects of carbohydrate and lipid metabolism of administering a quick-release formulation of bromocriptine (Ergoset) to obese, nondiabetic, hyperinsulinemic women. RESEARCH DESIGN AND METHODS: Hourly concentrations of prolactin, glucose, insulin, free fatty acid (FFA), and triglyceride were measured for 24 h before and after approximately 8 weeks of treatment with Ergoset. In addition, fasting lipid and lipoprotein concentrations and the steady-state plasma glucose (SSPG) concentration in response to a continuous infusion of somatostatin, insulin, and glucose were determined before and after Ergoset administration. RESULTS: Circulating prolactin concentrations were dramatically decreased (P < 0.001) following treatment, associated with a significant fall (P < 0.05) in 24-h-long plasma glucose, FFA, and triglyceride concentrations. Neither circulating plasma insulin concentrations nor the ability of insulin to mediate glucose disposal changed with treatment. Finally, fasting total cholesterol fell (P < 0.05) and the ratio of total to HDL cholesterol decreased (P = 0.06) in association with Ergoset treatment. CONCLUSIONS: The fact that significant metabolic improvement was seen in the obese nondiabetic hyperinsulinemic women studied suggests that Ergoset could be of therapeutic benefit in clinical conditions of hyperglycemia and/or dyslipidemia.     

Antimicrobial activity and spectrum of LB20304, a novel fluoronaphthyridone

Compound LB20304 is a fluoronaphthyridone carboxylic acid with a novel pyrrolidine substituent. This drug was compared with ciprofloxacin, levofloxacin, ofloxacin, and trovafloxacin against over 800 pathogens, most from blood stream infections, by National Committee for Clinical Laboratory Standards reference methods. LB20304 was the most active agent against gram-positive species including strains observed to be resistant to other fluoroquinolones and glycopeptides. The potency of LB20304 (MIC50, 0.03 micrograms/ml) against the Enterobacteriaceae was exceeded only by that of ciprofloxacin (0.015 micrograms/ml). It has limited activity against gram-negative anaerobes.     

Determination of tryptophan in feedstuffs: Comparison of two methods of hydrolysis prior to HPLC analysis

The tryptophan content of nine samples of commercial feed was determined using two procedures (I and II) differing mainly in the hydrolysis conditions used prior to analysis. With I, hydrolysis was performed with 4 M LiOH in the presence of maltodextrin with 5-methyltryptophan used as internal standard at 110°C for 24 h; with II. oxygen-free 1.3 M Ba(OH)₂ was used at 125°C for 16 h. The two procedures gave identical results for a given sample indicating that the corrections for the incomplete recovery of tryptophan 5-methyltryptophan quantitation were satisfactory.     

Tracking musical patterns using joint accent structure.

Joint Accent Structure (JAS) is a construct that uses temporal relationships between different accents in a melodic pattern as indices of its complexity. The present study examines the role of different JASs in real time, attending to simple musical events. 39 adults with or without musical training were told to selectively attend to and synchronize finger taps with accents in 2 experiments that examined attentional tracking to musical patterns having a concordant or discordant JAS. Results indicate that tapping was more variable with discordant than with concordant JAS patterns, both with respect to produced inter-accent time periods and with respect to the phase of taps relative to accent onsets. These findings are interpreted in terms of real time attending and its control by event time structure. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

SED88: a Pascal program for the analysis of sedimentation equilibrium data

Analytical ultracentrifugation is commonly used for the determination of molecular weights (sedimentation equilibrium) and sedimentation coefficients (sedimentation rate) of biological macromolecules in solution. A Turbo Pascal program for the analysis of sedimentation equilibrium centrifugation data produced by absorbance optical systems is described. The user may enter data from a scan of absorbance versus distance from the centre of rotation, via a graphics tablet (or ASCII file). This is subsequently manipulated to yield an apparent weight average molecular weight for the given sample. Plots of ln (absorbance) versus (radius2) may also be produced. The method described uses readily available computational equipment requiring only a graphics tablet in addition to an IBM PC compatible computer. This technique and the software developed have been used to investigate the molecular weight range of two International Humic Substances Society (IHSS) reference samples from the Suwannee River.     

Mechanical properties of poly(ether-ether-ketone) for engineering applications

An outline of the characteristics of PEEK and the versatility of its compositional forms (micro and macro composites) are given to illustrate its wide potential for success in engineering applications. Although it is necessary to have particular tabulations of mechanical properties for engineering design, these are seldom available and consequently it is argued that an understanding of stiffness, toughness and strength properties are required to fully exploit available manufacturer's data and thus develop the full potential of PEEK and its composites. Stiffness characteristics are considered in terms of a modulus function which is dependent on time under load and temperature. In its composite forms, whether reinforced with short or continuous fibres, stiffness anistropy can be both considerable and complex, but some empirical ground-rules are apparent. For continuous fibre composites even in the form of complex lay-ups, it is also possible to attempt some stiffness prediction from certain pseudo-elastic constants. Toughness of PEEK and its composites is described in terms of both comparative and intrinsic properties. Instrumented falling weight impact data, particularly as a function of temperature enable some insight into ductile-brittle transitions for the unreinforced material, but crack initiation and crack propagation processes for the various fibre reinforced forms. Intrinsic toughness is described in terms of linear elastic fracture mechanics theory. Strength properties are described for static and dynamic loading configurations. In particular, PEEK and its composites are evaluated for increasing test severities for strength characteristics; stress concentration, loading form and test temperature are considered.