Low-intensity optical bistability in an active Fabry-Perot mirror induced by input-phase-insensitive parametric downconversion

A Fabry-Perot resonator filled with second-order nonlinear optical material is investigated. Attention is devoted to making the resonator act as a nonlinear mirror for ultralow-intensity light signals that can be switched by a control beam at the second-harmonic frequency. The interaction process is an input-phase-independent parametric downconversion. The theoretical problem is solved through implementation of a dummy variable method optimized for a parametric process. Efficient amplification and bistability of low-intensity signals have been found.     

Forthcoming Contributions

Table of Contents

Forthcoming Contributions     

Approximation of a Variable Density Cloud of Points by Shrinking a Discrete Membrane

This paper describes a method to obtain a closed surface that approximates a general 3D data point set with nonuniform density. Aside from the positions of the initial data points, no other information is used. Particularly, neither the topological relations between the points nor the normal to the surface at the data points are needed. The reconstructed surface does not exactly interpolate the initial data points, but approximates them with a bounded maximum distance. The method allows one to reconstruct closed surfaces with arbitrary genus and closed surfaces with disconnected shells.     

Reconstructing 3D light microscopic images using the EM algorithm

An iterative method to recover perfectly focused images from a set of light microscopic images is proposed. The method is based on the EM algorithm, and it assumes a prior knowledge about the Point Spread Function of the optical system, as well as about the optical parameter settings of the acquisition system. The method is applied to the visualization of integrated circuit samples through an optical microscope and to the recovery of their depth information.     

Phytotoxicity and heavy metals speciation of stabilised sewage sludges

The presence of heavy metals in the sludges produced in wastewater treatment restricts plants growth and hence their use for agricultural purposes. This study looks at different types of sludges (aerobic, anaerobic, unstabilised and sludge from a waste stabilisation pond) and compares the distribution of the heavy metals that they contain according to the treatment that they have undergone. The sewage sludges were subjected to chemical characterisation and phytotoxicity testing (in absence of substrate) to provide a preliminary assessment of their suitability for land application. In addition, the total quantity of metals (Cd, Cr, Cu, Ca, K, Fe, Mg, Ni, Na, Pb and Zn) was determined. The Community Bureau of Reference (BCR) method for heavy metal speciation was followed. It was confirmed that the total concentration of heavy metals did not exceed the limits set out by European legislation and that the stabilisation treatment undergone by the sludges strongly influenced the heavy metal distribution and the phases to which they were associated. The sludge extracts did not exert any significant adverse effect on the relative seed germination (RSG) of barley (Hordeum vulgare L.) or cress (Lepidium sativum L.), although the reduction in germination index (GI) indicates that some characteristics existed did have an adverse effect on root growth.     

Atmospheric dry deposition of persistent organic pollutants to the Atlantic and inferences for the global oceans

Atmospheric deposition to the oceans is a key process affecting the global dynamics and sinks of persistent organic pollutants (POPs). A new methodology that combines aerosol remote sensing measurements with measured POP aerosol-phase concentrations is presented to derive dry particulate depositional fluxes of POPs to the oceans. These fluxes are compared with those due to diffusive air-water exchange. For all polychlorinated biphenyl (PCB) congeners and lower chlorinated dibenzo-p-dioxins and furans (PCDD/Fs), air-water exchange dominates the dry deposition mechanism. However, this tendency reverses in some areas, such as in marine aerosol influenced areas and dust outflow regions, consistent with the important variability encountered for the depositional fluxes. Seasonal variability is mainly found in mid-high latitudes, due to the important influence of wind speed enhancing dry deposition fluxes and temperature as a driver of the gas-particle partitioning of POPs. The average dry aerosol deposition flux of sigmaPCBs and sigmaPCDD/Fs to the Atlantic Ocean is calculated to be in the order of 66 ng m(-2) yr(-1) and 9 ng m(-2)yr(-1) respectively. The total dry aerosol deposition of sigmaPCBs and sigmaPCDD/Fs to the Atlantic Ocean is estimated to be 2200 kg yr(-1) and 500 kg yr(-1), respectively, while the net air-water exchange is higher, 22000 kg sigmaPCBs yr(-1) for PCBs and 1300 kg sigmaPCDD/Fs yr(-1). Furthermore, it is suggested that marine aerosol plays an important role in scavenging atmospheric contaminants.     

Passive in situ remediation of metal-polluted water with caustic magnesia: evidence from column experiments

Passive remediation consists of a permeable system that enables the water to pass through while retaining metals by means of biogeochemical reactions. Conventional passive treatments are based on calcite dissolution. This increases the pH to values between 6 and 7, which are insufficiently high to precipitate divalent metals. Alternative treatments are based on sulfate reduction with organic matter in order to precipitate metal sulfides. However, redox reactions are usually too slow to treat large groundwater flows as currently found in gravel aquifers (>50 m/a). Caustic magnesia obtained from calcination of magnesium carbonate was tested as an alternative material to devising passive remediation systems. Caustic magnesia reacts with water to form magnesium hydroxide, which dissolves, increasing the pH to values higher than 8.5. Then zinc and lead are mainly precipitated as hydroxides, copper is precipitated as hydroxysulfate, and manganese(II) is oxidized and precipitated as manganese(III) oxides. Thus, metal concentrations as high as 75 mg/L in the inflowing water are depleted to values below 0.04 mg/L. Magnesia dissolution is sufficiently fast to treat flows as high as 100 m/a. The new precipitates may lead to a permeability drop in the porous treating system. Mixtures of caustic magnesia and an inert material such as silica sand (approximately 50% of each) have been shown to be as reactive as pure magnesia and permeable for a longer time (more than 10 months and 1000 pore vol).     

Solid-phase microextraction liquid chromatography/tandem mass spectrometry to determine postharvest fungicides in fruits

A method to determine five postharvest fungicides (dichloran, flutriafol, o-phenylphenol, prochloraz, tolclofos methyl) in fruits (cherries, lemons, oranges, peaches) has been developed using solid-phase microextraction (SPME) coupled to liquid chromatography (LC) with photodiode array (DAD), mass spectrometry (MS), or tandem mass spectrometry (MS/MS) with ion trap detection. Extraction involved sample homogenization with an acetone/water solution (5:1), filtration, and acetone evaporation prior to fiber extraction. The pesticides were isolated with a fused-silica fiber coated with 50-microm Carbowax/template resin. The effects of pH, ion strength, sample volume, and extraction time were investigated, and their impact on the SPME-LC/MS was studied. Dynamic and static modes of desorption were compared and the variables affecting desorption processes in SPME-LC optimized. Static desorption provided the best recoveries and peak shapes. Recoveries at the limit of quantification (LOQ) levels were between 10% for prochloraz and 60% for o-phenylphenol, with relative standard deviations from 13.6% for prochloraz to 3.1% for o-phenylphenol. The versatility of the method was also exhibited by its excellent linearity in the concentration intervals between 0.0005 and 5 mg kg(-1) for dichloran and 0.01-10 mg kg(-1) for tolclofos methyl and prochloraz. LOQs ranged from 0.25 to 1 microg g(-1) using DAD, from 0.002 to 0.01 microg g(-1) using LC/MS, and from 0.0005 to 0.01 to microg g(-1) using LC/MS/MS. LOQs obtained in the present study using LC/MS and LC/MS/MS are lower than maximum residue limits established for all the fungicides in any matrix studied. The method enables to determine polar pesticides at low-microgram per gram levels in fruits.     

An analysis of the determinants in Economics and Business publications by Spanish universities between 1994 and 2004

The objective of this study consists, firstly, of quantifying differences between Spanish universities’ output (in terms of publications and citations), and secondly, analysing its determinants. The results obtained show that there are factors which have a positive influence on these indicators, such as having a third-cycle programme, with public financing obtained in competitive selection procedures, having a large number of full-time researchers or involvement in collaborations with international institutions. However, other factors which appear to have the opposite effect were also noted. These include a higher number of students per lecturer or a lower proportion of lecturers with recognised six-year periods.