Extrusion-rotomolding of plasticized PVC formulations

In this work, we present a novel process to produce plasticized PVC articles. Plasticized PVC dispersion resin (dry blend) was extruded and poured into a hot mold. The mold was transferred to a rotomolding machine, where the final geometry was obtained. Formulations using commercial PVC suspension resin and three different types of plasticizers were prepared under different processing conditions. The physical appearance of the articles and the tensile properties of the materials were evaluated.     

In-situ-Messung der Stickoxidkonzentration in turbulenten Diffusionsflammen

Zusammenfassung Die laserspektroskopischen Me?methoden laserinduzierte Fluoreszenz und spontane Ramanspektroskopie werden eingesetzt zur Messung der Konzentrationen von Stickoxid, Hydroxyl sowie der chemischen Hauptkomponenten und der Temperatur. Betrachtet wird die thermische Umsetzung von Wasserstoff mit Luftsauerstoff. Es wird die experimentelle Vorgehensweise und Problematik dargestellt. Ebenso wird der Weg der Modellierung und Berechnung turbulenter Verbrennungsvorg?nge am konkreten Beispiel skizziert. Die Annahme chemischen Gleichgewichts stellt sich als ungenügend in der Berechnung der Stickoxid- und Hydroxylkonzentrationen heraus. Eine deutlich bessere Vorhersage wird durch Einführen einer Reaktionsfortschrittsvariablen für das chemische Modell erreicht.     

Influence of two-step process and of different stoichiometric ratios on morphologies generated in castor oil epoxy resins

Phase separation during polymerization was studied in a model system consisting of a diepoxide based on diglycidyl ether of bisphenol A (DGEBA), variable amounts of ethylenediamine (EDA) and the mass of castor oil (CO) necessary to obtain a mass fraction equal to 0-15 in a final system where the stoichiometric ratio of amine to epoxy equivalents, r, was equal to 1. A two-step polymerization process was performed by curing first a system with r = 0-5, during variable times before phase separation, and then carrying the system to r = 1. Thermodynamic analysis of samples with different r values led to a linear relationship between the Flory-Huggins interaction parameter and r. The concentration (P) and average size (D?) of dispersed-phase particles followed opposite trends, i.e. P increased while D? decreased, when either r was increased or the time of curing in the first step of a two-step process was decreased. This was explained by assuming that the competition between nucleation and growth was determined by the viscosity at the cloud point, η_cp. Low values of η_cp favoured growth over nucleation and led to fewer but larger particles.     

From the individual element test to finite element templates: Evolution of the patch test

This paper starts a sequence of three articles that follow an unconventional approach in finite element research. The ultimate objective is to construct high-performance elements and element-level error estimators for those elements. The approach takes off from our previous work in high-performance elements and culminates with the development of finite element templates. The present paper concentrates on the patch test and evolved versions of the test that have played a key role in this research. Following a brief review of the historical roots, we present the Individual Element Test (IET) of Bergan and Hanssen in an expanded context that encompasses several important classes of new elements. The relationship of the IET to the multielement forms A, B and C of the patch test and to the single-element test are investigated. An important consequence of the IET application is that the element stiffness equations decompose naturally into basic and higher-order parts. The application of this decomposition to the “sanitization” of the non-convergent BCIZ element is described and verified with numerical experiments. Two sequel papers in preparation are subtitled ‘the algebraic approach’ and ‘element-level error estimation’. These apply the fundamental decomposition to the derivation of templates for specific mechanical elements and to the construction of element-level error estimators, respectively.     

An overview of FDA medical device regulation as it relates to deep brain stimulation devices.

The United States Food and Drug Administration (FDA) is charged with assuring the safety and effectiveness of a variety of medical products and the FDA's Center for Devices and Radiological Health is responsible for premarket and postmarket regulation of medical devices. In this paper, we review--from device classification and clinical studies to the final marketing application--FDA's premarket requirements and postmarket requirements as they relate to deep brain stimulation devices.     

Integrating scheduling and control functions in computer integrated manufacturing using artificial intelligence

Proper integration of scheduling and control in Flexible Manufacturing Systems will make available the required level of decision-making capacity to provide a flexibly-automated, efficient, and quality manufacturing process. To achieve this level of integration, the developments in computer technology and sophisticated techniques of artificial intelligence (AI) should be applied to such FMS functions as scheduling. In this paper, we present an Intelligent Scheduling System for FMS under development that makes use of the integration of two AI technologies. These two AI technologies — Neural Networks and Expert Systems — provide the intelligence that the scheduling function requires in order to generate goodschedules within the restrictions imposed by real-time problems. Because the system has the ability to plan ahead and learn, it has a higher probability of success than conventional approaches. The adaptive behavior that will be achieved contribute to the integration of scheduling and control in FMS.     

The Los Alamos beacon receiver array

Describes radio receivers that monitor transmissions from beacons on geosynchronous satellites. The receivers can detect ionospheric perturbations of a 300-3000 s period in the electron density integrated from beacon to receiver, for amplitudes as low as (1-2)×10¹³ m^-2. Data are used in studies of atmospheric acoustic and acoustic-gravity waves     

Longitudinal investigation of the abstinence violation effect in binge eaters.

This study, guided in part by G. A. Marlatt and J. R. Gordon's (1985) abstinence violation effect (AVE) model, examined whether variability in cognitive and emotional reactions to binges accounts for recurrence of binge eating. Attributional, cognitive, and affective reactions to 2 successive binges, as well as the latencies between each binge and a subsequent binge, were evaluated through a series of structured phone interviews with 50 nonpurging normal-weight female bingers. Reported mood after binging was unrelated to binge latency. However, when Ss made more intense internal, global, and uncontrollable causal attributions for a binge, a subsequent binge followed significantly sooner. Within-subject variations in AVEs across binges prospectively predicted within-subject variations in the speed with which another binge followed. Analyses suggested that cognitive states (e.g., AVE and guilt) evoked by particular events were better predictors of how quickly binging repeats than were stable differences in attributional style. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of pretreatments and freezing rate on the firmness of potato tissue after a freeze–thaw cycle

The texture of potato tissue after a freeze–thaw process using different freezing rates and different pretreatments was analysed, in order to select the best strategy for optimum preservation of the textural characteristics of pre‐frozen potato. Ten blanching conditions were tested and a two‐step blanching process with calcium chloride (0.07 g mL^?1) proved the most effective in protecting the tissue after a freeze–thaw process (maximum load force around 10–55% of the raw tissue, depending on potato batch, for air‐blast freezing and 20–60% for immersion freezing). Vacuum impregnation at 100 and 400 mbar, even when followed by different pre‐drying treatments to remove excess water, was very detrimental to resistance to a freeze–thaw process (maximum load force below 10% of the raw tissue for air‐blast freezing and below 20% for immersion freezing). Microstructure analysis confirmed better tissue integrity retention with ethyleneglycol immersion freezing instead of air‐freezing. Differences were found between batches with a 6‐month difference in storage time, indicating that the fresher batch was more suitable for freezing.