Economics of liquid hydrogen from water electrolysis

Using the data from vendors and open literature, we have constructed a preliminary cost model to predict the cost of liquid hydrogen (LH₂) from water electrolysis. The model has been applied to two LH₂ plants. Both have a production rate of 10 886 kg day⁻¹. The first plant (Plant 1) consists of a tank-type electrolyzer and a liquefier and runs all day at the base-load (or equivalent base-load) power rate. The second (Plant 2) consists of a tank-type electrolyzer, a liquefier, a compressor, and storage vessels. The electrolyzer and the compressor shall run only during the off-peak hours at the off-peak power rate. However, the liquefier shall run all day at the base-load (or equivalent base-load) power rate. The costs of LH₂ from both plants are presented. Unless the base-load power rate is high and the off-peak power rate is substantially low, Plant 1 appears to be economically more feasible than Plant 2.     

TOXICITY OF 1, 2-DIMETHYLHYDRAZINE IN MICE: EFFECT OF DIET AND DEVELOPMENT OF TOLERANCE

The effect of diet on the lethality of 1, 2-dimethylhydrazine (DMH) injections was investigated using Swiss mice. Mortality was highest when mice were fed a nutrient-diluted/high-fat diet, was intermediate with a nutrient-diluted/low-fat diet and was lowest with laboratory chow. Wheat bran was not protective. Mice developed tolerance to DMH after receiving several injections of progressively increasing dose.     

Undesirable sensory properties of the dried pea (Pisum sativum). The rôle of saponins

The rôle of saponins in the undesirable sensory properties of the dried pea P sativum is reported. The sensory properties of isolated soyasaponin I are defined and described as bitter, astringent and metallic. The distribution of saponin in various air-classified pea flour fractions shows that the protein-rich fraction may contain sufficient saponin to cause undesirable tastes.     

Production of biodiesel from waste fryer grease using mixed methanol/ethanol system

Transesterification of waste fryer grease (WFG) containing 5–6 wt.% free fatty acid (FFA) was carried out with methanol, ethanol, and mixtures of methanol/ethanol maintaining the oil to alcohol molar ratio of 1:6, and initially with KOH as a catalyst. Mixtures of methanol and ethanol were used for transesterification in order to use the better solvent property of ethanol and rapid equilibrium using methanol. Formation of soap by reaction of FFA present in WFG with KOH instigated difficulty in the separation of glycerol from biodiesel ester. To untangle this problem, two-stage (acid and alkali catalyzed) method was used for biodiesel synthesis. More than 90% ester was obtained when two-stage method was used compared to ∼ 50% ester in single stage alkaline catalyst. In the case of mixed alcohol, a relatively smaller amount of ethyl esters was formed along with methyl esters. Acid value, viscosity, and cetane number of all the esters prepared from WFG were within the range of the ASTM standard. Esters obtained from WFG showed good performance as a lubricity additive.     

Weekly storage of coolness in heavy brick and adobe walls

Weekly storage of coolness in heavy walls (walls with large thermal inertia or large characteristic time constants or low Fourier numbers) was investigated numerically by considering one-dimensional heat conduction through the walls. The study consisted of first analyzing the heat flow through a single wall and considering various boundary conditions on the inside. The boundary conditions were: constant inside air tempeture throughout the day, variable inside air temperature on a 24-hour cycle, and variable inside air temperature on a 48-hour cycle. Next, the heat flow through walls was studied through a thermal network analysis of a simple building. In this case it was assumed that the ambient air temperature (following a periodic distribution) was increased suddenly and followed this new distribution for many days thereafter.It was concluded that walls with high thermal inertia or time constant can store coolness for several days. The larger the time constant of the wall (for example adobe as compared with brick) the longer it takes for the wall temperature to reach a steady periodic distribution after the change has occurred. However, because of low thermal conductivity of adobe, the retrieval of the stored coolness in these walls is slow, and the mean daily temperature of the room air in the adobe building does not change appreciably beyond seven days after the change. Increase of the wall thickness beyond 50 cm does not improve the thermal performance of the building significantly.     

Temperature resistance coefficient of composite resistive materials in the mixed-structure approximation

A method of calculating the temperature resistance coefficient and its temperature dependence for resistive materials in the approximation of a matrix-statistical structure is outlined.Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 49, No. 3, pp. 477–481, September, 1985.