Hydrothermal Synthesis of Acicular Lead Titanate Fine Powders

A pure, acicular lead titanate (PbTiO₃) fine powder with a white color has been prepared by hydrothermal synthesis. It is a new phase of PbTiO₃ with I 4 symmetry, cell parameters of a = 12.358 Å and b = 14.541 Å, and a density of 6.80 g.cm⁻³. The influences of pH (12.5 to 14.4), Pb/Ti ratio (1.0 to 1.6) in the feedstock, reaction temperature (130° to 230°C), time (0.25 to 4 h), starting materials, and additives on the formation of acicular PbTiO₃ under hydrothermal conditions have been investigated. The acicular PbTiO₃ with I 4 symmetry, referred to as the PX phase, can be converted to the perovskite-type (PE phase) of PbTiO₃ at about 605°C while its acicular morphology is essentially unchanged. The preferable conditions for preparing pure acicular PX-phase PbTiO₃ are that the pH is 13.0 to 14.0, Pb/Ti ratio is >1.3, reaction temperature is 170° to 200°C, time is 0.5 to 1.0 h, titanium butoxide (Ti[O(CH₂)₃CH₃]₄) is the starting material, and poly(vinyl alcohol) is an additive. The acicular grain of the PX phase is usually less than 100 nm in diameter and more than 1000 nm in length.     

水平井生产测井技术应用

通过技术合作，对水平井生产动态监测测井技术进行了探索，取得了一定效果。介绍了水平井产出剖面测井的关键技术。介绍了将测井仪器送入水平钻穿的地层中的3个传输测井工艺，包括钻杆传输方法、柔性管传输方法和井下牵引输送方法；介绍了所采用的测井系列，重点分析解决油汽水三相分离问题的测井方案；介绍了水平井测井资料的解释和评价技术；通过模拟实验，确定井中4种流体流型，提出持液率关系式和流量测井响应关系式。     

Effects of organic farming on minerals contents and aroma composition of Clemenules mandarin juice

Consumers demand organic products because they believe that the organic products are more flavorful and respectful to the environment and human health. The effects of organic farming on the minerals contents and aroma composition of Clemenules mandarin juices were studied. Minerals (Fe, Cu, Mn, Zn, Ca, Mg, K, and Na) were quantified using atomic absorption-emission spectroscopy, while volatile compounds were extracted using the dynamic headspace technique and were identified and quantified by GC–MS. In general, organic farming produced a mandarin juice with a higher quality than that produced by conventional agricultural practices. Higher concentrations of both minerals and positive volatile compounds were found in the organic juice, while the formation of off-flavors was higher in the conventional juice, although threshold values were not reached.     

Application of a Three-dimensional Wind Driven Circulation Model to Assess the Locations of New Drinking Water Intakes in Lake Ontario

A 3D transport model is used to perform a comparative analysis of several potential drinking water intakes located along the northwest shore of Lake Ontario between Toronto and Oshawa. The model is specifically used to assess each intake under both long- and short-term transport of a potential pollutant release from the Pickering Nuclear Generating Station and potential and actual pollutant releases from local land sources respectively. A model based on a 500 m grid resolution is calibrated using data collected in the aftermath of the 1992 tritium spill at the Pickering Nuclear Generation Station and subsequently used to simulate long-term transport. A model based on a 100 m grid resolution is verified using drogue studies and used to simulate short-term transport events. Both models are used to assess pollutant levels at each of nine potential intake locations under different wind scenarios and pollutant releases. Field data for the study included water quality and flow measurements from local sewers and rivers, and estimates of pollutant levels from the local waste water treatment plants. This paper describes the model setup for both the long-term and short-term transport models, calibration using field data, long-term transport modeling, short-term transport modeling, and the comprehensive analysis approach used to evaluate the nine potential intake locations proposed. Results indicated that four intakes in particular outperformed other intake locations by maintaining bottom pollutant levels within governmental standards and warning times that exceeded 20 hours.     

Multiresidue method for pesticides in drinking water using a graphitized carbon black cartridge extraction and liquid chromatographic analysis

A general liquid-solid extraction procedure for the isolation of pesticides from groundwater and drinking water for high-performance liquid chromatography (HPLC) is presented. This simple and rapid procedure involved passing a 2-L sample through a 250-mg graphitized carbon black (Carbopack B) cartridge at a flow rate of 150-160 mL/min. By taking advantage of the presence of positively charged active centers on the Carbopack B surface, a stepwise elution system allowed the complete separation of base-neutral pesticides from acidic ones. After partial solvent removal, the components in the two fractions were separated and quantified by gradient elution, reversed-phase HPLC with ultraviolet (UV) detection. The performance of the Carbopack cartridge was compared with that of a 500-mg C-18 bonded silica cartridge. With the Carbopack cartridge, the grand mean measurement accuracy of the 35 pesticides considered was 95%. With the C-18 cartridge, the grand mean measurement accuracy of the analytes was 76%. Compared to the C-18 cartridge, additional advantages of using a Carbopack cartridge are that the extraction procedure is about 7 times shorter, no pH adjustment of the environmental sample is necessary for trapping acidic compounds, and one cartridge instead of two suffices to extract base-neutral and acidic pesticides, making the Carbopack cartridge more adaptable than the C-18 one for field use. The detection limits by this method of all the pesticides considered were between 0.003 and 0.07 micrograms/L.     

Spreading Codes Generator for Wireless CDMA Networks

The prime characteristic of spread spectrum modulated signals is that their bandwidth is greater than the information rate. In this way a redundancy is introduced that allows the severe levels of inteference inherent in the transmission of digital information over radio and satellite links to be overcome. Current spread spectrum applications are primarily in military communications; nevertheless, there is growing interest in this technique for third generation mobile radio networks (UMTS, FPLTS, etc.) with open discussion regarding the practicality of using a multiple access system based on spread spectrum techniques (CDMA). However, in order to support as many users in the same bandwidth as other multiple access techniques such as TDMA or FDMA, it is important how to generate large families of sequences that present low cross-correlation. The aim of this paper is to describe a spreading codes generator that can produce a large number of PN sequences with good properties of auto- and cross-correlation. Moreover, the codes generated shows high unpredictability and good statistical behaviour. This also allows the implementation of some features that are common on military networks such as message privacy (increasingly important in commercial networks) without additional cost. The structure presented shows itself to be advantageous for high speed generation of codes at a low cost, low power consumption (allowing longer life for batteries), small size and simplicity of implementation, essential ingredients for commercial equipment. Another attractive feature is its structural parallelism, useful in VLSI implementations. All of these features render it potentially suitable for the implementation of channel bandwidth sharing systems in future wireless personal communications networks.     

Primary lymphoma of the breast. Three cases of non-Hodgkin lymphoma

Primary and sole breast lymphoma is a very rare disease. With the review of our series of 616 cases operated on for breast cancer, only 3 cases (0.48%) of primary breast non-Hodgkin lymphoma (LNH) have been observed. The authors outline the problems concerning diagnosis and therapy of this rare disease: pathological and immunohistochemical aspects are discussed. They stress the importance of staging in order to plan a correct multidisciplinary approach.