Finite element analysis of partly wrinkled reinforced prestressed membranes

Wrinkling is a well known phenomenon experimented by tension membranes in Civil Engineering applications. This paper will present an efficient numerical technique for the computational simulation of such wrinkles in a prestressed membrane. In particular, the relaxed energy approach (Pipkin in IMA J Appl Math 36:85–99, 1986) is particularized for prestressed membranes (Gil in Textile composites and inflatable structures, CIMNE, 2003) undergoing moderate strains. Wrinkling conditions in terms of the Euler-Lagrange finite deformation tensor along principal directions will be obtained. This will provide a framework to describe properly the initial instant when wrinkles start to be encountered in a prestressed Saint Venant–Kirchhoff hyperelastic membrane. Subsequently, a modified Helmholtz’s free energy functional will be introduced with the purpose of describing the modified constitutive behaviour of the continuum after the onset of wrinkling. Consistent derivations of the stress tensor as well as the constitutive tensor will de depicted. The results will be particularized for membranes and cables in a Finite Element discretization basis. Some numerical examples will prove the accuracy and robustness of the described algorithm.     

Effects of organic farming on minerals contents and aroma composition of Clemenules mandarin juice

Consumers demand organic products because they believe that the organic products are more flavorful and respectful to the environment and human health. The effects of organic farming on the minerals contents and aroma composition of Clemenules mandarin juices were studied. Minerals (Fe, Cu, Mn, Zn, Ca, Mg, K, and Na) were quantified using atomic absorption-emission spectroscopy, while volatile compounds were extracted using the dynamic headspace technique and were identified and quantified by GC–MS. In general, organic farming produced a mandarin juice with a higher quality than that produced by conventional agricultural practices. Higher concentrations of both minerals and positive volatile compounds were found in the organic juice, while the formation of off-flavors was higher in the conventional juice, although threshold values were not reached.     

A computational study of LP-based heuristic algorithms for two-dimensional guillotine cutting stock problems

In this paper we develop and compare several heuristic methods for solving the general two-dimensional cutting stock problem. We follow the Gilmore-Gomory column generation scheme in which at each iteration a new cutting pattern is obtained as the solution of a subproblem on one stock sheet. For solving this subproblem, in addition to classical dynamic programming, we have developed three heuristic procedures of increasing complexity, based on GRASP and Tabu Search techniques, producing solutions differing in quality and in time requirements. In order to obtain integer solutions from the fractional solutions of the Gilmore-Gomory process, we compare three rounding procedures, rounding up, truncated branch and bound and the solution of a residual problem. We have coded and tested all the combinations of algorithms and rounding procedures. The computational results obtained on a set of randomly generated test problems show their relative efficiency and allow the potential user to choose from among them, according to the available computing time. Rceived: January 9, 2001 / Accepted: December 10, 2001     

Multivariate evaluation of Spanish educational research journals

This paper informs about an evaluation of Spanish educational research journals using the modality of reputation inferred from survey data. Univariate and multivariate patterns are offered. Specifically cluster analysis and non-parametric multidimensional scaling reveal themselves as useful methods to inquire the complexity of this scientometric question which is the evaluation of periodical series. This revised version was published online in June 2006 with corrections to the Cover Date.     

Ionomer composites based on sepiolite/hydrogenated poly(styrene butadiene) block copolymer systems

Ionomeric composites based on sepiolite and hydrogenated poly(styrene butadiene) block copolymer were obtained and characterized from a microstructural and electrical point of view. Before blending, because of the high silanol group concentration in the sepiolite, the latter could be organophilized with suitable coupling agents. The resulting materials were easily processed into thin films or membranes 0.2–0.4 mm thick, their conductivity in some cases approaching 10^?1 S/cm. Their suitability for film formation and good electrical properties indicate potential applications as electrolytes in polymer fuel cells. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3512–3519, 2002     

Analysis of the cooling capability of steam generators during the loss of residual heat removal system at midloop operation with closed primary system

Loss of residual heat removal system (RHRS) at midloop operation is one of the most significant core damage risk contributor at low power and shutdown conditions. During this kind of transients the reflux-condensation is one of the cooling mechanisms anticipated in the abnormal procedure of loss of RHRS at midloop level. In this sense, several simulations of loss of the RHRS with closed primary system with the TRACE V4.160 code have been performed considering different availability of steam generators. The present study aims to analyze the thermal-hydraulic behavior after the loss of RHRS at midloop conditions with the reflux-condensation as the only cooling mechanism available and to investigate the capability of this cooling mechanism. The simulation results show that one steam generator is sufficient to remove core decay heat of 11 MW obtaining an equilibrium pressure, but the core uncovery depends on the number of steam generators operating. Finally, an analysis of the abnormal procedure and the event trees of the loss of RHRS sequences at midloop operation has been performed taking into account the results obtained in the simulation with TRACE.     

Variation in Malting Quality and Heat Resistance in the Malting Barley Variety “Alexis”

In earlier studies concerning vigour, where subsamples are heat‐treated before germination there was found heat‐sensitive as well as heat‐resistant barley samples. The vigour model developed by Ellis and Roberts and further developed at Carlsberg, could only describe the heat‐sensitive barleys. Seventeen samples of the “Alexis” variety grown widely in Europe were collected from the EBC trials in 1994 in order to see if heat resistance in barley was influenced by different growing conditions. We found both heat‐sensitive samples following the vigour model as well as pronounced heat‐resistant samples, but these were not divided according to growing conditions. The germination curves dependent on heat treatment and germination time were evaluated by Principal Component Analysis (PCA). Heat‐resistant barley samples could be differentiated from heat‐sensitive samples already after ½ h of heat treatment at 68°C (12% moisture) and after 3 days of germination. The barley samples were analysed with regard to malting quality. The PCA evaluation of the data divided the samples according to growing location, mainly due to differences in protein and β‐glucan. However, the malting analyses could not describe the differences in heat resistance and sensitivity of the barleys. The biochemical background of the heat resistance found is discussed on the basis of literature. Our findings should give an experimental basis for exploiting a biochemical principle for heat resistance, which is formed during grain filling and consumed during storage and germination.     

Using artificial intelligence to model heavy plate mill rolling

This research summary discusses the application of neural networks, evolutionary strategies, and other artificial intelligence techniques in the modeling and optimization of the models used for temperature, rolling force, and torque calculation in heavy plate milling.