Contribution a l'etude du polymorphisme de Ga2S3: Structure cristalline de Mn0,23Ga1,85S3

The Mn_0.23Ga_1.85S₃ phase belongs to the solid solution $\text{ф}{}_0$, stable at low temperature in the Ga₂S₃MnS system. It is hexagonal superstructure of the wurtzite, with the Ga₂S₃α′ type ($\text{a}\text{= 6.397}\text{A}\text{?}$; $\text{c}\text{= 18.027}\text{A}\text{?}$Z = 6; space groupe P6₁ or P6₅). Its crystal structure has been refined by the least squares method to a final R = 0.06 with 323 independant reflections. This structure is closely related to Ga₂S₃ α described by Hahn and Frank, and differs only by the partial occupation of the vacant metal site of Ga₂S₃ by Mn atoms in statistical disorder.     

Sol-gel Preparation and Preliminary in vitro Evaluation of Fluorapatite／Hydroxyapatite Solid Solution Films

Fluorapatite/hydroxyapatite solid solution has better biological properties than other apatites, especially used as films or coatings. In this work, sol-gel preparation and in vitro behavior of fluorapatite/hydroxyapatite solid solution films on titanium alloy were investigated. Ca(NO3)2-4H20 and PO(OH)x(OEt)3-x were selected as precursors, and hexafluorophosphoric acid (HPFo) was used as a fluorine containing reagent. The Ca and P precursors were mixed with HPFo to keep the Ca/P molar ratio 1.67. The mixtures refluxed for 12 h were used as dipping sols for the preparation of the films. The phase of the films obtained at 600℃ was apatite. The F contents in the films increased with the concentrations of HPF6 in the dipping sols. The solid solution films were shown to have better stability than hydroxyapatite films, and a reasonably good bioactivity in the in vitro evaluation.     

Thermal expansion characteristics of a titanium modified austenitic stainless steel: measurement by high-temperature X-ray diffraction and modelling using Grüneisen formalism

The thermal expansion of a titanium modified, swelling resistant austenitic stainless steel designated as D9 is studied by measuring the lattice parameter as a function of temperature in the range 300-1300 K by high-temperature X-ray diffraction technique. The thermal expansion data thus obtained is in reasonable agreement with the typical thermal expansion values reported for similar nuclear grade austenitic stainless steels. However, at temperatures exceeding 900 K, the measured thermal expansivity exhibits a pronounced non-linear increase due partly to the precipitation of complex carbide and intermetallic phases. The high-temperature thermal expansion data obtained in the present study are augmented by modelling the low-temperature thermal expansion behaviour by Grüneisen formalism.     

Space-variant nonorthogonal structure CMOS image sensor design

A CMOS log-polar image sensor has been designed and fabricated. As a result, a systematic approach has been proposed to design space-variant sensors and layouts. The pixels in this sensor are distributed in a polar fashion; the image plane consists of concentric rings containing the elementary sensing cells. Such a structure, where polygons use any space orientation, does not match very well with current design tools and CMOS fabrication processes. An approach to design nonorthogonal repetitive structures using standard fabrication processes and computer-aided design (CAD) tools is presented. The result of this work is an image sensor, with log-polar structure, suitable for image processing since the log-polar mapping has interesting mathematical and image data reduction properties     

A computational study of LP-based heuristic algorithms for two-dimensional guillotine cutting stock problems

In this paper we develop and compare several heuristic methods for solving the general two-dimensional cutting stock problem. We follow the Gilmore-Gomory column generation scheme in which at each iteration a new cutting pattern is obtained as the solution of a subproblem on one stock sheet. For solving this subproblem, in addition to classical dynamic programming, we have developed three heuristic procedures of increasing complexity, based on GRASP and Tabu Search techniques, producing solutions differing in quality and in time requirements. In order to obtain integer solutions from the fractional solutions of the Gilmore-Gomory process, we compare three rounding procedures, rounding up, truncated branch and bound and the solution of a residual problem. We have coded and tested all the combinations of algorithms and rounding procedures. The computational results obtained on a set of randomly generated test problems show their relative efficiency and allow the potential user to choose from among them, according to the available computing time. Rceived: January 9, 2001 / Accepted: December 10, 2001     

Ionomer composites based on sepiolite/hydrogenated poly(styrene butadiene) block copolymer systems

Ionomeric composites based on sepiolite and hydrogenated poly(styrene butadiene) block copolymer were obtained and characterized from a microstructural and electrical point of view. Before blending, because of the high silanol group concentration in the sepiolite, the latter could be organophilized with suitable coupling agents. The resulting materials were easily processed into thin films or membranes 0.2–0.4 mm thick, their conductivity in some cases approaching 10^?1 S/cm. Their suitability for film formation and good electrical properties indicate potential applications as electrolytes in polymer fuel cells. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3512–3519, 2002     

Variation in Malting Quality and Heat Resistance in the Malting Barley Variety “Alexis”

In earlier studies concerning vigour, where subsamples are heat‐treated before germination there was found heat‐sensitive as well as heat‐resistant barley samples. The vigour model developed by Ellis and Roberts and further developed at Carlsberg, could only describe the heat‐sensitive barleys. Seventeen samples of the “Alexis” variety grown widely in Europe were collected from the EBC trials in 1994 in order to see if heat resistance in barley was influenced by different growing conditions. We found both heat‐sensitive samples following the vigour model as well as pronounced heat‐resistant samples, but these were not divided according to growing conditions. The germination curves dependent on heat treatment and germination time were evaluated by Principal Component Analysis (PCA). Heat‐resistant barley samples could be differentiated from heat‐sensitive samples already after ½ h of heat treatment at 68°C (12% moisture) and after 3 days of germination. The barley samples were analysed with regard to malting quality. The PCA evaluation of the data divided the samples according to growing location, mainly due to differences in protein and β‐glucan. However, the malting analyses could not describe the differences in heat resistance and sensitivity of the barleys. The biochemical background of the heat resistance found is discussed on the basis of literature. Our findings should give an experimental basis for exploiting a biochemical principle for heat resistance, which is formed during grain filling and consumed during storage and germination.     

Characteristics of a NaOH-Activated Blast Furnace Slag Blended with a Fine Particle Silica Waste

Mortars of blast furnace slag blended with a geothermal silica waste at various replacement levels of 0%, 5%, 10%, 15%, and 20% were cured for up to 90 days. The binder was activated by 6 wt% Na₂O equivalent of sodium hydroxide. Lime was added as an activating agent and also to promote pozzolanic reaction with the silica. It was found that the presence of the silica waste increased the reactivity of the cementitious materials, as measured by means of nonevaporable water. The compressive strength was increased in the presence of the silica, except at the highest replacement level of 20%, the optimum silica replacement was that of 5%–10%. The microstructures of blended slag showed less porosity than those of neat slag mortars. The lime was completely consumed after 90 days of hydration.     

Ecophysiology of ochratoxigenic Aspergillus ochraceus and Penicillium verrucosum isolates. Predictive models for fungal spoilage prevention - a review

Ochratoxin A (OTA) is a secondary metabolite produced by several species of Aspergillus and Penicillium; among them Aspergillus ochraceus and Penicillium verrucosum are two ochratoxigenic species capable of growing in different climates and thus contamination of food crops with OTA can occur worldwide. OTA can be found in a wide range of foods such as cereals, coffee, cocoa, spices, beer, wine, dried vine fruit, grapes and meat products. OTA is toxic to animals, it presents neurotoxic, immunotoxic and nephrotoxic effects. It has been implicated in a human kidney disorder known as Balkan Endemic Nephropathy. This review focuses on the ecophysiology of ochratoxin-producing Aspergillus ochraceus and Penicillium verrucosum, the effect of environmental factors on their germination, mycelial growth, and OTA production. Knowledge of environmental conditions required for sucessive stages of fungal development represent the first step towards preventing mycotoxin formation. Predictive models for different stages of fungal development are presented, which allow prediction of the time before spoilage as a function of the abiotic factors. Finally, the implications of these studies in management of barley, coffee and grapes are described. This can help to identify the critical control points in their production, storage and distribution processes.     

Downhole Upgrading of Extra-heavy Crude Oil Using Hydrogen Donors and Methane Under Steam Injection Conditions

An extra-heavy crude oil underground upgrading process is described which involves the downhole addition of a hydrogen donor additive under steam injection conditions (280-315°C and residence times of at least 24-h). Laboratory experiments showed a 4° increase in the API gravity (from 9 to 12°) of the upgraded product, a two-fold reduction in the viscosity and, an approximately 8% decrease in the asphaltene content with respect to the original crude. Further increases on the temperature led to products with improved properties reaching 15°API at 315°C. It was found that the presence of the natural formation (catalysts) and methane (natural gas) is necessary to enhance the properties of the upgraded crude oil. From GC and GC-MS results a reaction pathway is proposed that involves hydrogen transfers from tetralin to the extra-heavy crude oil resulting in the formation of 1,2-dihydronaphthalene. This compound is then transformed into naphthalene, further upgrading of crude oil through hydrogen donation. The results of the experiments carried out in the presence and absence of the mineral formation and with an inert solid (SiC) strongly indicate that the former acts as a catalyst and not as a heat transfer matrix. Isotopic labeling studies (CD₄ and ¹³CH₄) give evidences that, most probably, methane is involved in the upgrading reactions.