Comparison of the Determination of Eight Cholesterol Oxides in Dry�CCured Shoulder by GC�CFID, GC�CMS, and GC Tandem Mass Spectrometry

The analysis of eight cholesterol oxidation products: 7α–hydroxycholesterol, 7β–hydroxycholesterol, α–epoxycholesterol, β–epoxycholesterol, 20α–hydroxycholesterol, cholestanetriol, 25–hydroxycholesterol, and 7–ketocholesterol in dry–cured shoulder was carried out. The extraction of lipids was performed by using the Bligh and Dyer method (1959). Interferences were removed by solid-phase extraction (SPE) in two steps with silica and aminipropylsilica SPE columns. The separation of the eight cholesterol oxidation products was done by gas chromatography, and the detection was performed by flame ionization detection (FID) and mass spectrometry (MS). The results obtained from the use of both systems of detection were compared. The results showed that gas chromatography-mass spectrometry (GC–MS) was the most suitable technique to obtain reliable quantitative data, and significant differences (p < 0.05) between FID and MS determining 7α–hydroxycholesterol, 20α–hydroxycholesterol, and 25–hydroxycholesterol were observed. For the determination of cholesterol oxidation products, it was necessary to apply gas chromatography-tandem mass spectrometry to increase the sensitivity and to avoid interference from other compounds.     

Electrical and Thermal Properties of Twin-Screw Extruded Multiwalled Carbon Nanotube/Epoxy Composites

This paper presents the experimental results of dispersing multiwalled carbon nanotubes (MWNTs) into epoxy (space grade structural adhesive) nanocomposites using co-rotating twin screw extrusion process. Two sets of specimens were prepared; set 1 with ultrasonication for predispersing MWNT before extrusion and set 2 direct dispersion of MWNT in the extruder. MWNT was loaded up to 8 vol.% in both the sets. The specimens were characterized for room temperature volume and surface resistivities as per ASTM D257 using Keithley Model 6517 and for thermal conductivity in the temperature range ?50 to 150 °C as per ASTM E 1530 using Thermal Conductivity Instrument (TCI) 2022 SX211. The volume resistivity of sets 1 and 2 decreased to an extent of 10¹¹ and 10⁹ respectively. The surface resistivity drop was of the order of 10⁹ for both the sets. These drops corresponded to the maximum MWNT loading of 8 vol.%. Electrical conductivity values of the specimens were fitted into the Power Law Model to evaluate the critical exponent. Both sets 1 and 2 showed increase in thermal conductivity with increase in temperature in the testing range. Thermal conductivity increased with increase in filler loading and the maximum increase was 60% at 150 °C in case of 8 vol.% MWNT nanocomposites for set 1. The corresponding value for the set 2 was 25%. Thermal conductivity values were predicted using Lewis Nielson model. DSC of the specimens showed increase in glass transition temperature with increase in filler loading. The dispersion of the nanofillers was studied using SEM and the surface morphology using AFM.     

CMOS harmonic upconverter with power management of $$2{\bf nd}$$ harmonic for wideband short-range communications

The design and simulation of a 2nd harmonic based upconverter is introduced. With the proposed upconverter, it is possible to reach a good noise figure with power and area reduction. The design of the circuit was made with the UMC \(0.18\,\upmu \hbox {m}\) Mixed Mode/RF CMOS technology. However, the design methodology can be extended to a different CMOS process. According to the performance exhibited by the purposed mixer, it may be useful in wideband short-range communication technologies, such as certified wireless USB.     

Propagation Path Loss and Materials Insertion Loss in Indoor Environment at WiMAX Band of 3.3 to 3.6?GHz

The purpose of this study is to characterize the indoor channel for IEEE 802.16 (WiMAX) at 3.3?C3.6?GHz frequency. This work presents a channel model based on measurements conducted in commonly found scenarios in buildings. These scenarios include closed corridor, wide corridor and semi open corridor. Path loss equations are determined using log-distance path loss model and a Rayleigh multipath induced fading, Normal multipath induced fading or a combination of both. A numerical analysis of measurements in each scenario was conducted and the study determined equations that describe path loss for each scenario. Propagation loss is given for 300?MHz bandwidth. This work also represents the insertion loss of different materials and the obstruction loss due the existence of human beings between the transmitting antenna and the receiving one.     

A Perspective Review of Security Challenges in Body Area Networks for Healthcare Applications

International Journal of Wireless Information Networks - Body area network (BAN) connects sensors and actuators to the human body in order to collect patient’s information and transmitting it...     

Gaussianization: An Efficient Multivariate Density Estimation Technique for Statistical Signal Processing

Multivariate density estimation is an important problem that is frequently encountered in statistical learning and signal processing. One of the most popular techniques is Parzen windowing, also referred to as kernel density estimation. Gaussianization is a procedure that allows one to estimate multivariate densities efficiently from the marginal densities of the individual random variables. In this paper, we present an optimal density estimation scheme that combines the desirable properties of Parzen windowing and Gaussianization, using minimum Kullback–Leibler divergence as the optimality criterion for selecting the kernel size in the Parzen windowing step. The utility of the estimate is illustrated in classifier design, independent components analysis, and Prices’ theorem.     

Ytterbium-Doped P$_2$O$_5$-TeO $_2$ Glass for Laser Applications

Ytterbium-doped sodium phospho-tellurite glasses are made with different P₂O₅:TeO₂ ratio, and Yb³⁺ concentrations. Physical properties of the new Yb hosts are favorable for laser applications. The glasses show high absorption and emission cross sections and higher lifetime of Yb³⁺:²F_5/2rarr²F_7/2 transition. The emission cross sections are calculated using two different methods and compared. The laser parameters of these Yb³⁺ -doped glasses are better than many reported glasses and crystals making them potential to fabricate high power laser and broadband optical amplifier in the wavelength region around ~1 mum     

Editorial: Security and Privacy in Internet of Things

Mobile Networks and Applications -     

The muscle activation method: an approach to impedance control of brain-machine interfaces through a musculoskeletal model of the arm

Current demonstrations of brain-machine interfaces (BMIs) have shown the potential for controlling neuroprostheses under pure motion control. For interaction with objects, however, pure motion control lacks the information required for versatile manipulation. This paper investigates the idea of applying impedance control in a BMI system. An extraction algorithm incorporating a musculoskeletal arm model was developed for this purpose. The new algorithm, called the muscle activation method (MAM), was tested on cortical recordings from a behaving monkey. The MAM was found to predict motion parameters with as much accuracy as a linear filter. Furthermore, it successfully predicted limb interactions with novel force fields, which is a new and significant capability lacking in other algorithms.