Reduction of the elongation at break of thermoplastic polyolefins through melt blending with polylactide and the influence of the amount of compatibilizers and the viscosity ratios of the blend components on phase morphology and mechanics

The objective of this work is the synthesis of a polypropylene/ethylene‐propylene‐rubber (TPO)/polylactide (PLA)/compatibilizer (PVM) blend to reduce the elongation at break of TPO by blending TPO with brittle PLA. Three TPO types with different viscosities were melt blended with PLA and an ethylene/n‐butylacrylate/glycidyl methacrylate terpolymer (PVM) as reactive compatibilizer. All blends had a constant PLA amount of 30 wt%. Two parameters were varied in the experiments, viscosity of the TPO types, and amount of PVM used in the blends. Both parameters played important roles in reducing the nominal elongation at break compared to pure TPO foils and influencing the phase morphology of extruded blend foils. The nominal elongation at break could be reduced by 100‐150% through blending TPO with PLA and PVM. Characterization regarding the blend morphology, especially the size and shape of the dispersed PLA phase in the TPO matrix was done by Environmental Scanning Electron Microscopy (ESEM) images. Investigations of the morphology showed that size and shape of dispersed PLA phases are dependent on the viscosity ratios of the blend components and on the amount of compatibilizer in the blend. AFM images of the polymer blends reveal soft rubbery layers around the dispersed PLA phases. POLYM. ENG. SCI., 56:905–913, 2016. © 2016 Society of Plastics Engineers     

Potent and Selective Non‐hydroxamate Histone Deacetylase 8 Inhibitors

Specific inhibition of histone deacetylase 8 (HDAC8) has been suggested as a promising option for the treatment of neuroblastoma and T‐cell malignancies. A novel class of highly potent and selective HDAC8 inhibitors with a pyrimido[1,2‐c][1,3]benzothiazin‐6‐imine scaffold was studied that is completely different from the traditional concept of HDAC inhibitors comprising a zinc binding group (ZBG), in most cases a hydroxamate group, a spacer, and a capping group that may interact with the surface of the target protein. Although lacking a ZBG, some of the new compounds were shown to have outstanding potency against HDAC8 in the single‐digit nanomolar range. The pyrimido[1,2‐c][1,3]benzothiazin‐6‐imines also inhibited the growth of solid and hematological tumor cells. The small size and beneficial physicochemical properties of the novel HDAC inhibitor class underline the high degree of drug likeness. This and the broad structure–activity relationship suggest great potential for the further development of compounds with the pyrimido[1,2‐c][1,3]benzothiazin‐6‐imine scaffold into innovative and highly effective therapeutic drugs against cancer.     

Germanium-antimony-selenium-tellurium thin films: Clusters formation by laser ablation and comparison with clusters from mixtures of elements

Quaternary germanium-antimony-selenium-tellurium (Ge-Sb-Se-Te) thin films deposited from Ge_19.4Sb_16.7Se_63.9−xTe_x (x = 5, 10, 15, and 20) glass-ceramics targets by radio frequency magnetron sputtering were studied using laser ablation quadrupole ion trap time of flight mass spectrometry. Binary, ternary, and quaternary Ge_aSb_bSe_cTe_d clusters were formed and their stoichiometry was determined. By comparison of the clusters obtained from quaternary Ge-Sb-Se-Te thin films and those from ternary Ge-Sb-Te materials, we found that Ge-Te species are not detected from the quaternary system. Furthermore, Ge-Se and Se-Te species are missing in mass spectra generated from Ge-Sb-Se-Te thin films. From the Ge-Sb-Se-Te thin films, 16 clusters were detected while ternary Ge-Sb-Se glasses yielded 26 species. This might be considered as a signal of higher stability of Ge-Sb-Se-Te thin films which is increasing with a higher content of Te. The missing (Se₂⁺, Ge_aSb⁺ (a = 1–4), and GeSe_c⁺ (c = 1, 2)) and new (Ge⁺ and Sb_bTe⁺ (b = 1–3)) clusters may indicate that some of the structural features of the films (Ge₂Se_6/2 and Se₂Sb-SbSe₂) were replaced by (GeSe_4−xTe_x and SbSe_3−xTe_x) ones. In addition, when comparing the stoichiometry of clusters formed from Ge-Sb-Se-Te thin films with those from the mixtures of the elements, only Sb₃⁺ and SbSe⁺ were observed in both cases. The knowledge gained concerning clusters stoichiometry contributes to the elucidation of the processes proceeding during plasma formation used for the chalcogenide thin films deposition.     

Silver versus white sheet as a back reflector for microcrystalline silicon solar cells deposited on LPCVD‐ZnO electrodes of various textures

We compare the performance of two back reflector designs on the optoelectrical properties of microcrystalline silicon solar cells. The first one consists of a 5‐µm‐thick low‐pressure chemical vapor deposition (LPCVD)‐ZnO electrode combined with a white sheet; the second one incorporates an Ag reflector deposited on a thin LPCVD‐ZnO layer (with thickness below 200 nm). For this latter design, the optical loss in the nano‐rough Ag reflector can be strongly reduced by smoothing the surface of the thin underlying ZnO layer, by means of an Ar‐plasma treatment. Because of its superior lateral conductivity, the thin‐ZnO/Ag back reflector design provides a higher fill factor than the dielectric back reflector design. When decreasing the roughness of the front electrode with respect to our standard front LPCVD‐ZnO layer, the electrical cell performance is improved; in addition, the implementation of the thin‐ZnO/Ag back reflector leads to a significant relative gain in light trapping. Applying this newly optimized combination of front and back electrodes, the conversion efficiency is improved from 8.9% up to 9.4%, for cells with an active‐layer thickness of only 1.1 µm. We thereby highlight the necessity to optimize simultaneously the front and back electrodes. Copyright © 2014 John Wiley & Sons, Ltd.     

Windshield recycling focused on effective separation of PVB sheet

The study is focused on windshield recycling process resulting in poly(vinyl butyral) (PVB) sheets with very low amout of remain glass particles. PVB sheets were obtained from worldwide manufacturer DuPont and then they were laminated by standard autoclaving process. One sample of PVB sheet was modified by multi‐functional organic acid in order to compare various levels of adhesion. Three‐stage technology was proposed for recycling PVB sheets. In the first‐stage laminated safety glass was mechanically cracked. In the second‐stage the adhesion reduction to minimal degree was followed by chemical‐physical assisted separation. It causes self‐release of the glass out of the PVB sheet. The third‐stage was mechanical peeling of the remaining glass from the PVB sheet which completed the recycling process. The optimal process conditions for the most effective delamination process were found. Delamination technology produces PVB sheet with minimal residual glass content (up to 300 ppm) and minimal change in PVB sheet properties. Described recycling technology is ecologically friendly (the effluent is fully recyclable as well) and could reduce the worldwide problem with windshield waste disposal. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39879.     

Novel 1,3,5-Triazinyl Aminobenzenesulfonamides Incorporating Aminoalcohol,Aminochalcone and Aminostilbene Structural Motifs as Potent Anti-VRE Agents,and Carbonic Anhydrases I,II, VII,IX, and XII Inhibitors

A series of 1,3,5-triazinyl aminobenzenesulfonamides substituted by aminoalcohol, aminostilbene, and aminochalcone structural motifs was synthesized as potential human carbonic anhydrase (hCA) inhibitors. The compounds were evaluated on their inhibition of tumor-associated hCA IX and hCA XII, hCA VII isoenzyme present in the brain, and physiologically important hCA I and hCA II. While the test compounds had only a negligible effect on physiologically important isoenzymes, many of the studied compounds significantly affected the hCA IX isoenzyme. Several compounds showed activity against hCA XII; (E)-4-{2-[(4-[(2,3-dihydroxypropyl)amino]-6-[(4-styrylphenyl)amino]-1,3,5-triazin-2-yl)amino]ethyl}benzenesulfonamide (31) and (E)-4-{2-[(4-[(4-hydroxyphenyl)amino]-6-[(4-styrylphenyl)amino]-1,3,5-triazin-2-yl)amino]ethyl}benzenesulfonamide (32) were the most effective inhibitors with K_Is = 4.4 and 5.9 nM, respectively. In addition, the compounds were tested against vancomycin-resistant Enterococcus faecalis (VRE) isolates. (E)-4-[2-({4-[(4-cinnamoylphenyl)amino]-6-[(4-hydroxyphenyl)amino]-1,3,5-triazin-2-yl}amino)ethyl]benzenesulfonamide (21) (MIC = 26.33 µM) and derivative 32 (MIC range 13.80–55.20 µM) demonstrated the highest activity against all tested strains. The most active compounds were evaluated for their cytotoxicity against the Human Colorectal Tumor Cell Line (HCT116 p53 +/+). Only 4,4’-[(6-chloro-1,3,5-triazin-2,4-diyl)bis(iminomethylene)]dibenzenesulfonamide (7) and compound 32 demonstrated an IC₅₀ of ca. 6.5 μM; otherwise, the other selected derivatives did not show toxicity at concentrations up to 50 µM. The molecular modeling and docking of active compounds into various hCA isoenzymes, including bacterial carbonic anhydrase, specifically α-CA present in VRE, was performed to try to outline a possible mechanism of selective anti-VRE activity.     

Silver-Sodium Exchange in Sodium Galliosilicate Glasses

The silver-sodium interdiffusion coefficients of several glasses in the sodium galliosilicate system were determined. The compositional dependence of the interdiffusion coefficient is compared to that observed in the self-diffusion coefficients calculated from dc electrical conductivity data. The observed trends are discussed in terms of a structural model proposed for these glasses.