Determining stress intensity factors of composites using crack opening displacement

The main purpose of this paper is to find the mixed-mode stress intensity factors of composite materials using the crack opening displacement (COD). First, a series solution of the composite material with a crack was used to evaluate COD values. Then, the least-squares method was used to calculate mixed-mode stress intensity factors. This algorithm can be applied to any method that generates or measures COD values. The major advantage of this method is that COD values very near the crack tip are not necessary. Both finite element simulations and laboratory experiments were applied to validate this least-squares method with acceptable accuracy if the even terms of the series solution are removed.     

High-yield synthesis of single-crystalline 3C-SiC nanowires by a facile autoclave route

Single-crystalline 3C-SiC nanowires have been synthesized in large scale through a one-step autoclave route by the reaction of SiCl₄, (C₅H₅)₂Fe and metallic Na at 500 °C. Electron microscopy investigations show that the nanowires have typical diameters of 15-50 nm, lengths up to several tens of micrometers and grow along the [111] direction. The possible growth mechanism of the nanowires is discussed.     

N-Type Field-Effect Transistors Using Multiple Mg-Doped ZnO Nanorods

Nanorod field-effect transistors (FETs) that use multiple Mg-doped ZnO nanorods and a SiO₂ gate insulator were fabricated and characterized. The use of multiple nanorods provides higher on-currents without significant degradation in threshold voltage shift and subthreshold slopes. It has been observed that the on-currents of the multiple ZnO nanorod FETs increase approximately linearly with the number of nanorods, with on-currents of ~1 muA per nanorod and little change in off-current (~4times10^-12). The subthreshold slopes and on-off ratios typically improve as the number of nanorods within the device channel is increased, reflecting good uniformity of properties from nanorod to nanorod. It is expected that Mg dopants contribute to high n-type semiconductor characteristics during ZnO nanorod growth. For comparison, nonintentionally doped ZnO nanorod FETs are fabricated, and show low conductivity to compare with Mg-doped ZnO nanorods. In addition, temperature-dependent current-voltage characteristics of single ZnO nanorod FETs indicate that the activation energy of the drain current is very low (0.05-0.16 eV) at gate voltages both above and below threshold     

25mm厚钢板产生层间撕裂的原因和防治

层间撕裂并非是厚板独有的质量问题 ,结合工程实例 ,分析 2 5mm厚低合金钢板产生层间撕裂的原因。通过对钢材的超声波探伤检测、化学成分分析和Z向性能检测 ,指出层间撕裂主要与节点设计不当和钢材内非金属夹杂物偏析、分层有关 ,并提出了预防措施。对产生裂纹的构件视严重情况提出了不同的修补处理方法     

HPD-2型非临氢降凝催化剂工艺实验

利用HPD-2型非临氢降凝催化剂进行了中试实验。结果表明：HPD-2型非临氢降凝催化剂相对其他的同类催化剂产品液体收率较高，最高可达95％以上；在反应温度为380℃时，凝点降幅在50℃左右，降凝效果较好；产品性质稳定，具有很好的应用前景。     

钢锭零能少氧化均热轧制的研究

根据计算机的辅助分析,采用新的钢锭传搁、注后强制水冷却、垫铁脱模等工艺后,入炉钢锭的热焓已超过开坯轧制需要,利用普通均热炉代替钢锭保温车,可完全依靠到钢锭自身潜热与显热进行均热。对不同锭型与钢种采用经试验的最佳时间均热后再轧制,收与保温车均热钢锭直接轧制相同的效果。     

An ethical analysis of student-faculty interactions

Senior nursing students described their interactions with faculty in a journal writing assignment. These interactions were categorized by the ethical perspectives of justice, autonomy, beneficence, and caring. An ethical analysis of faculty-student interactions is a strategy that may help nursing faculty and students understand differing perceptions about their relationships.     

动态全息图快速引入背景条纹技术

音叉振动镜快速引入背景条纹的动态全息图两次曝光法，适用于一次泵浦的双脉冲全息干涉计量术．其背景条纹的密度和方向具有可调性和重复性．     

高压高产井电子压力计直读试井应注意的几个问题

在高压高产井电子压力计直读试井中，推荐选用石英作为压力传感器的压力计，附加适量的加重杆，保证压力计顺利入井，并平稳工作；同时选用可靠的井口防喷系统。     

IP over Optical网络联合流量工程研究

对IPoverOptical网络的流量工程进行了深入的研究。问题,给出了两种流量工程体系结构,重叠流量工程和联合流量工程,然后对这两种流量工程体系进行了比较,并给出了联合流量工程的实现框图以及需要解决的关键问题。