Placement for large-scale floating-gate field-programable analog arrays

Modern advances in reconfigurable analog technologies are allowing field-programmable analog arrays (FPAAs) to dramatically grow in size, flexibility, and usefulness. Our goal in this paper is to develop the first placement algorithm for large-scale floating-gate-based FPAAs with a focus on the minimization of the parasitic effects on interconnects under various device-related constraints. Our FPAA clustering algorithm first groups analog components into a set of clusters so that the total number of routing switches used is minimized and all IO paths are balanced in terms of routing switches used. Our FPAA placement algorithm then maps each cluster to a computational analog block (CAB) of the target FPAA while focusing on routing switch usage and balance again. Experimental results demonstrate the effectiveness of our approach.     

High‐Performance Dual‐Circularly Polarized Reflector Antenna Feed

This paper presents a high‐performance dual‐circularly polarized feed employing a dielectric‐filled circular waveguide. Novel features are incorporated in the proposed feed, such as a dielectric rod radiator for high gain and good impedance matching; dual quarter‐wave chokes for low axial ratio over wide angles and for low back radiation; an integrated septum polarizer; and two end‐launch‐type coaxial‐to‐waveguide transitions. The proposed feed shows excellent performance at 5.0 GHz to 5.2 GHz.     

Performance study of close-loop power control algorithms for acellular CDMA system

Performance of a reverse link code-division multiple-access (CDMA) system with fast close-loop power control algorithms is studied. It is found that if the fast close-loop power control algorithm functions effectively, the speed of the mobile unit is in the range such that its Doppler frequency is less than one tenth of the power control updating rate. This paper also proposes a new predictive power control algorithm with better performance in terms of system capacity than the conventional and adaptive step size algorithms. An increase in system capacity as high as 22% compared with the conventional algorithm can be achieved depending on the mobile velocity     

Combined beamforming with space-time block coding using double antenna array group

The performance of the combined beamforming of space-time block coding according to the number of antenna array groups has been analysed. CB/spl I.bar/STBC/spl I.bar/single array and CB/spl I.bar/STBC/spl I.bar/double array were compared under the condition of DOA and SNR. CB/spl I.bar/STBC/spl I.bar/double array is shown to have a stable performance independent of DOA and angular spread.     

Highly Efficient Video Codec for Entertainment‐Quality

We present a novel video codec for supporting entertainment‐quality video. It has new coding tools such as an intra prediction with offset, integer sine transform, and enhanced block‐based adaptive loop filter. These tools are used adaptively in the processing of intra prediction, transform, and loop filtering. In our experiments, the proposed codec achieved an average reduction of 13.35% in BD‐rate relative to H.264/AVC for 720p sequences.     

A flip-chip packaged 80-nm In0.7Ga0.3As MHEMT for millimeter-wave low-noise applications

In this paper, we present a flip-chip 80-nm In_0.7Ga_0.3As MHEMT device on an alumina (Al₂O₃) substrate with very little decay on device RF performance up to 60 GHz. After package, the device exhibited high I_DS = 435 mA/mm at V_DS = 1.5 V, high g_m = 930 mS/mm at V_DS = 1.3 V, the measured gain was 7.5 dB and the minimum noise figure (NF_min) was 2.5 dB at 60 GHz. As compared to the bare chip, the packaged device exhibited very small degradation in performance. The result shows that with proper design of the matching circuits and packaging materials, the flip-chip technology can be used for discrete low noise FET package up to millimeter-wave range.     

Development of a large area plate-to-plate type UV imprinting tool

A UV imprint lithography tool has been developed for micro/nano-scale patterning in an extremely large area, i.e., ∼300 × 400 mm². To achieve high pattern fidelity, residual-layer thickness uniformity, and an air bubble-free layer in a large area, the UV imprint tool has several main components including a silicon rubber uniform pressurizer, a large area UV-LED module, a vacuum pump, a chuck module, etc. Contact and structural analyses have been performed using commercial FEM packages such as LS-DYNA and ANSYS. The developed tool has been tested, and its performance indices including pattern fidelity and residual-layer thickness uniformity have been measured to be ∼97% and ∼90%, respectively.     

Work Function Tunability of Refractory Metal Nitrides by Lanthanum or Aluminum Doping for Advanced CMOS Devices

A lanthanum (La)-doped HfN is investigated as an n-type metal gate electrode on SiO₂ with tunable work function. The variation of La concentration in (HfinfinLa_1-x)N_y modulates the gate work function from 4.6 to 3.9 eV and remains stable after high-temperature annealing (900degC to 1000degC), which makes it suitable for n-channel MOSFET application. An ultrathin high-fc dielectric layer was formed at the metal/SiO₂ interface due to the (HfinfinLa_1-x)N_y and SiO₂ interaction during annealing. This causes a slight reduction in the effective oxide thickness and improves the tunneling current of the gate dielectric by two to three orders. We also report the tunability of TaN with Al doping, which is suitable for a p-type metal gate work function. Based on our results, several dual-gate integration processes by incorporating lanthanum or aluminum into a refractory metal nitride for CMOS technology are proposed.     

Advances and Challenges with Data Broadcasting in Wireless Mesh Networks

Wireless mesh networks have become a promising means to provide low-cost broadband access. Many WMN applications require broadcasting data (IPTV etc.) over the WMN. This article studies how efficient data broadcast, measured in terms of broadcast latency, can be realized by exploiting two features of WMNs: the use of multiple transmission rates at the link layer and the use of multiple radio interfaces on each node. We demonstrate that by exploiting these features, broadcast latency can be reduced severalfold compared to the current default practice in wireless LANs of using the lowest transmission rate for broadcast traffic. We also discuss two important insights we have gained from our investigation. First, we find that when multiple radio interfaces are used, a channel assignment algorithm designed for unicast traffic may often perform poorly for broadcast flows. Second, we find that the efficiency of a transmission rate for reducing broadcast latency can be reasonably predicted by the product of the transmission rate and its coverage area.     

Chiroptical‐Conjugated Polymer/Chiral Small Molecule Hybrid Thin Films for Circularly Polarized Light‐Detecting Heterojunction Devices

Herein, a simple and facile strategy is described to obtain chiroptically active semiconductor thin films by blending of poly(3‐alkylthiophene)s, which are conventional achiral polymer semiconductors, and 1,1′‐binaphthyl (BN), a versatile chiral molecule. As expected, the intermolecular interaction between the two materials is important to extend the chirality of the binaphthyl molecules to the hybrid films. The controlled phase separation and crystallization of poly[3‐(6‐carboxyhexyl)thiophene‐2,5‐diyl] (P3CT) and binaphthyl hybrid films result in unique heterojunction bilayer thin‐film structures that consisted of BN microcrystals at the top and a P3CT/BN mixed layer at the bottom. Such heterojunction bilayer films exhibit significantly amplified chiroptical response with weak broadened tails, which is due to the enhanced crystallization of the chiral BN molecules and formation of heteroaggregates in the hybrid films. Based on the characterization of crystalline structure and photoluminescence analysis, it is found that new electronic energy states are formed in the conduction band region of P3CTs in the P3CT/BN heteroaggregates, which contribute to chirality transfer from BN to the hybrid films. As a proof of concept, a photodiode capable of distinguishably sensing the left‐ and right‐handed circularly polarized light is successfully fabricated by using the hybrid films with the heterojunction bilayer structure.