Selective wet etching of p-GaN for efficient GaN-based light-emitting diodes

The selective wet etching of a p-GaN layer by using a solution of KOH in ethylene glycol (KE) was studied to enhance the optical and electrical performance of the GaN-based light-emitting diodes (LEDs). The surface of the p-GaN, which was selectively etched in the KE solution, showed hexagonal-shaped etch pits. The light-output power of etched LEDs was improved by 29.4% compared to that of the nonetched LED. This improvement was attributed to the increase in the probability of photons to escape due to the increased surface area of textured surface and the reduction in contact resistance of the ohmic layer resulting from the increased contact area and hole concentration on the textured p-GaN. The reverse leakage current of the LED was also greatly decreased due to the surface passivation and the removal of defective regions from the p-GaN.     

Multi-objective module placement for 3-D system-on-package

System-on-package (SOP) is a viable alternative to system-on-chip (SOC) for meeting the rigorous requirements of today's mixed-signal system integration. Thermal integrity is arguably the most crucial issue in three-dimensional (3-D) SOP due to the compact nature of the 3-D integration. In addition, the power supply noise issue becomes more serious as the supply voltage continues to decrease while the number of active devices consuming power increases. We propose a 3-D module and decap (decoupling capacitance) placement algorithm that evenly distributes the thermal profile and reduces the power supply noise. In addition, we allocate white spaces around the modules that require decaps to suppress the power supply noise while minimizing the area overhead. In our experimentation, we achieve improvements in both maximum temperature and decap amount with only small increase in area, wirelength, and runtime.     

Design and Optimization of the Extended True Single-Phase Clock-Based Prescaler

The power consumption and operating frequency of the extended true single-phase clock (E-TSPC)-based frequency divider is investigated. The short-circuit power and the switching power in the E-TSPC-based divider are calculated and simulated. A low-power divide-by-2/3 unit of a prescaler is proposed and implemented using a CMOS technology. Compared with the existing design, a 25% reduction of power consumption is achieved. A divide-by-8/9 dual-modulus prescaler implemented with this divide-by-2/3 unit using a 0.18-mum CMOS process is capable of operating up to 4 GHz with a low-power consumption. The prescaler is implemented in low-power high-resolution frequency dividers for wireless local area network applications     

A self-driven active clamp forward converter using the auxiliary winding of the power transformer

This study proposes a new self-driven active clamp forward converter eliminating the extra drive circuit for the active clamp switch. The converter used the auxiliary winding of the power transformer to drive the active clamp switch and a simple RC circuit to get the dead time between the two switches. The operation principle was presented and experimental results were used to verify theoretical predictions. A 100-W (5 V/20 A) prototype converter that only exhibited 1.5-turn winding number in the auxiliary winding was sufficient to drive the active clamp switch on the input of 50 V. Finally, the measured efficiency of the converter was presented and the maximum efficiency of 91% was obtained.     

Template‐Based Reconstruction of Surface Mesh Animation from Point Cloud Animation

In this paper, we present a method for reconstructing a surface mesh animation sequence from point cloud animation data. We mainly focus on the articulated body of a subject — the motion of which can be roughly described by its internal skeletal structure. The point cloud data is assumed to be captured independently without any inter‐frame correspondence information. Using a template model that resembles the given subject, our basic idea for reconstructing the mesh animation is to deform the template model to fit to the point cloud (on a frame‐by‐frame basis) while maintaining inter‐frame coherence. We first estimate the skeletal motion from the point cloud data. After applying the skeletal motion to the template surface, we refine it to fit to the point cloud data. We demonstrate the viability of the method by applying it to reconstruct a fast dancing motion     

A power-factor controller for single-phase PWM rectifiers

A novel power-factor controller for single-phase pulsewidth modulated rectifiers is proposed. The unity power-factor controller for a sinusoidal input current is derived using the feedback linearization concept. Two active switches and two diodes are utilized for AC-to-DC power conversion. Experimental results obtained on a 4 kW prototype are discussed     

Performance of DS/CDMA-based equatorial LEO satellite system usingturbo-codes

Improving the bit error rate (BER) performance at low elevation angles is a crucial determining factor for the capacity of any low earth orbit (LEO) satellite system. In previous work, it has been demonstrated that the BER performance of a DS/CDMA-based equatorial LEO satellite system on a downlink can be improved significantly by using satellite diversity. The authors address the issue of improving BER at low elevation angles by using turbo codes     

Pilot-Assisted Carrier Frequency Offset Estimation for OFDM systems with Multiple Preambles Over Fast Fading Channels

This paper proposes a carrier frequency offset (CFO) estimation scheme for OFDM systems over fast fading channels. In the proposed scheme, exploiting the multiple preambles with the identical values, we estimate the CFO over fast fading channels. In particular, we improve the performance of the CFO estimator by applying the overlapped windows to preambles. Through simulations, we validate the proposed estimation scheme by showing the effectiveness of the proposed estimator.     

High current conduction with high mobility by non-radiative charge recombination interfaces in organic semiconductor devices

We report a unique non-radiative p-n-p junction structure to provide high current conduction with high mobility in organic semiconductor devices. The current conduction was improved by increasing p-n junctions made with intrinsic p-type hole transport layer and n-type electron transport layer. The excellent hole mobility of 5.3 × 10^?1 cm²/V s in this p-n-p device configuration is measured by the space charge limited current method with an electric field of 0.3 MV/cm. Enhanced current conduction of 248% at 4.0 V was observed in fluorescent blue organic light-emitting diodes with introduction of non-radiative p-n-p-n-p junction interfaces. Thereupon, the power efficiency at 1000 cd/m² was improved by 22% and the driving voltage also was reduced by 17%, compared to that of no interface device. Such high current conduction with high mobility is attributed to the carrier recombination at p-n-p interfaces through coulombic interaction. This non-radiative p-n-p junction structure suggested in this report can be very useful for many practical organic semiconductor device applications.