Faculty and Student Attitudes Toward Community Service: A Comparative Analysis

The Humanitarian Engineering initiative, sponsored by the William and Flora Hewlett Foundation, at the Colorado School of Mines, is creating a program that will support engineering students in understanding their responsibility for solving community development problems that exist throughout the world. As part of this effort, data has been collected on faculty and student attitudes using the ‘Community Service Attitudes Scale,” developed and validated by Shiarella, McCarthy, and Tucker. During the fall 2004, 78 students and 34 faculty members responded to this instrument. Statistically significant differences were found between the attitudes of students and faculty, males and females, and among different age groupings with respect to service activities. A general finding was that faculty displayed better attitudes toward community service than the students.     

A new amperometric biosensor for fructose determination based on epoxy-graphite-TTF-TCNQ-FDH-biocomposite

In this work a novel amperometric biosensor for fructose determination in solutions was developed. The device was constructed by the incorporation of a tetrathiofulvalene-tetracyanoquinodimethane organic conducting salt and fructose dehydrogenase enzyme, include in a polymeric matrix of epoxy resin and graphite powder. Because of the electrocatalytic function of the salt, the direct transfer of the electron between the reduced prosthetic group (PQQH₂) of the enzyme and the transducing material, was verified at a low working potential (150 mV vs. Ag/AgCl), where the interfering reactions were minimized. The response time at 90% of the steady state value was less than 20 s. The current response was directly proportional to the D-fructose concentration from 0.01 to 0.3 mmol/l with a detection limit of 0.005 mmol/l (signal/noise of 3) and a sensitivity of 1.9985 μA/mmol. The biosensor sensitivity diminishes when its surface is not polished between successive determinations, and remains constant (rsd=1.85, n=10) when the surface is polished between determinations. The effects of temperature and pH on the biosensor response were studied and analyzed; also the properties of the enzyme (Km _ap, I _max, Q₁₀) were determinate in this work. The biosensor was used to determine fructose in high fructose syrups and there were not significant differences between these results and those obtained by HPLC (p≤0.05). During 4 months, in intermittent determinations the biosensor kept 100% of its original sensitivity and after 18 months stored at 4°C, it only lost 32% of its sensitivity. The simplicity, low working potential, high stability and good performance of this biosensor shows a great potential for its use in the fructose determination.     

The effect of aromatics on paraffin mild hydrocracking reactions (WNiPd/CeY–Al2O3)

The conversion of heavy paraffin and aromatics into a high-quality diesel fraction was performed in a microplant using a WNiPd/CeY-alumina catalyst. The effects of aromatics and naphtheno-aromatics on mild hydrocracking of hexadecane were studied at different concentrations. Two catalysts, with and without Pd and thermal treatment, were characterized by FTIR, XPS, and TPD of ammonia and ammonia plus naphthalene to complement previous study about the surface composition. The hydrocracking activity and selectivity were tested using different amounts and types of aromatics. This study demonstrated the presence of two acid strengths that contribute in different ways to paraffin and aromatics isomerization, ring opening, and cracking reactions. The product distribution obtained by mild hydrocracking of n-C₁₆ is between amorphous (SiO₂Al₂O₃) and Y-zeolite type of support. The aromatic adsorption on acid sites reduces the cracking rate and improves the survival of di- and tri-branched paraffin. A model for the path of reaction is discussed to explain the results.     

Development of intelligent multisensor surveillance systems with agents

Intelligent multisensor surveillance systems consist of several types of sensors, which are installed on fixed and mobile devices. These components provide a huge quantity of information that has to be contrasted, correlated and integrated in order to recognize and react on special situations. These systems work in highly dynamic environments, with severe security and robustness requirements. All these characteristics imply the need for distributed solutions. In these solutions, scattered components can decide and act with some degree of autonomy (for instance, if they become isolated), or cooperate and coordinate for a complete tracking of special situations. In order to cope with these requirements and to better structure the solution, we have decided to design surveillance system control as a multiagent system. This is done by applying an agent-orientated methodology, which is assessed with concrete scenarios.     

Fe-substituted (La,Sr)TiO3 as potential electrodes for symmetrical fuel cells (SFCs)

In the work presented herein, the potential use of La₄Sr₈Ti_12−xFe_xO_38−δ (LSTF) materials as electrodes for a new concept of solid oxide fuel cells, symmetrical fuel cells (SFCs), is considered. Such fuel cells use simultaneously the same material as anode and cathode, which notably simplifies the assembly and further maintenance of the cells. Therefore, we search for materials showing high conductivity in a wide range of oxygen partial pressures in addition to certain degree of catalytic activity for the oxidation of the fuel and reduction of the oxidant, respectively. The preliminary electrochemical experiments performed reveal that the overall conductivity increases notably upon Fe substitution, being the main contribution electronic n-type. The fuel cell tests indicate that LSTF composites with YSZ and CeO₂ perform reasonably well under H₂ conditions, although the performance in methane is rather modest and require further optimisation.     

不能移动封隔器管柱变形受力分析——封隔器管柱受力分析系统讨论之五

不能移动封隔器管柱是油气井封隔器完井的一种常见类型 ,在井内压力、温度、流体 (井内压力、温度、流体简称井内条件 ,下同 )发生变化时 ,不能移动封隔器管柱受力分析是保证井下安全和完井作业成功的关键 ,同时该管柱受力分析与自由移动封隔器管柱受力分析有很大的差别。文中对不能移动封隔器管柱变形受力的有关问题进行了分析、推导和讨论 ,并给出了算例。     

Signals,timers, and continuations for multithreaded user‐level protocols

Precise timing and asynchronous I/O are appealing features for many applications. Unix kernels provide such features on a per‐process basis, using signals to communicate asynchronous events to applications. Per‐process signals and timers are grossly inadequate for complex multithreaded applications that require per‐thread signals and timers that operate at finer granularity. To respond to this need, we present a scheme that integrates asynchronous (Unix) signals with user‐level threads, using the ARIADNE system as a platform. This is done with a view towards support for portable, multithreaded, and multiprotocol distributed applications, namely the CLAM (connectionless, lightweight, and multiway) communications library. In the same context, we propose the use of continuations as an efficient mechanism for reducing thread context‐switching and busy‐wait overheads in multithreaded protocols. Our proposal for integrating timers and signal‐handling mechanisms not only solves problems related to race conditions, but also offers an efficient and flexible interface for timing and signalling threads. Copyright © 2006 John Wiley & Sons, Ltd.     

低温下液体饱和蒸气压的测试

着重介绍了静态法测试低温下（－１００～５０℃）液体饱和蒸气压的原理及方法，给出了低温下液体全氟三乙胺饱和蒸气压的测试结果，并进行了讨论。     

Losses of volatile compounds during fermentation

The ability of fermentative CO₂ to blow off the volatile compounds that are synthesized during fermentation has been studied. Model solutions simulating a fermenting must were purged at different CO₂ flow rates and temperatures, and the amount of volatile compounds blown off by the stream of CO₂ was recorded by high-resolution gas chromatography. Data showed that under normal fermenting conditions, fatty acid ethyl esters and some fusel alcohol acetates are blown off the solution at a high rate. The maximum loss rate was observed for ethyl decanoate. The purging speed is doubled when temperature increases from 17 °C to 27 °C. Losses can be interpreted by a linear model and are a function of the compound and the flow rate of CO₂. These models allow us to reconstruct the volatile synthesis vs time functions through graphic calculus and to estimate the proportion of volatile material retained, hydrolysed and purged. Synthesis takes place during the tumultuous period of fermentation together with CO₂ production that blows off the volatile material. Hydrolysis takes place in the last stages of fermentation. In a 10-1 open fermenter, up to 80% of volatile material can be blown off while an average of 10% is retained. Residual esterase activity accounts for about 20% of the total amount of ester synthesized.     

An improved watershed algorithm based on efficient computation of shortest paths

The present paper describes a new algorithm to calculate the watershed transform through rain simulation of greyscale digital images by means of pixel arrowing. The efficiency of this method is based on limiting the necessary neighbouring operations to compute the transform to the outmost, and in the total number of scannings performed over the whole image. The experiments demonstrate that the proposed algorithm is able to significantly reduce the running time of the fastest known algorithm without involving any loss of efficiency.