An electronically tunable microstrip bandpass filter using thin-film Barium-Strontium-Titanate (BST) varactors

A tunable third-order combline bandpass filter using thin-film barium-strontium-titanate varactors and fabricated on a sapphire substrate is reported. Application of 0-200-V bias varied the center frequency of the filter from 2.44 to 2.88 GHz (16% tuning) while achieving a 1-dB bandwidth of 400 MHz. The insertion loss varied from 5.1 dB at zero bias to 3.3 dB at full bias, while the return loss exceeded 13 dB over the range. The third-order intercept of the filter was found to be 41 dBm.     

Reliable real-time robot operation employing intelligent forward recovery

Modern computer-controlled robots typically fail at their tasks whenever they encounter an error, no matter how minor. The physical environment of a typical assembly robot is too unstructured to benefit from conventional software approaches to reliability. We present an approach which interfaces the real-time operation of the robot with an intelligent subsystem that performs error analysis and forward recovery if a failure occurs. Our approach involves a special representation of the robot's program that efficiently tracks the robot's operation in real time and is easy to modify to include automatically generated recovery procedures.     

Effects of partial closure and friction on a radial crack emanating from a circular hole

A radial crack emanating from a circular hole in an infinite sheet under tension is considered. Depending on the crack length and location, the crack may be partially or completely open or closed. In case of closure, interfacial friction influences the solution.Stress intensity factors for inclined tension or in-plane shear are computed and compared with those obtained when closure and friction are ignored.

---

Résumé On considère une fissure radiale provenant d'un trou circulaire dans une tôle mince infinie sous tension. Selon la longueur et la localisation de la fissure, celle-ci peut être partiellement ou totalement ouverte ou fermeée. Dans ce dernier cas, la résolution du champ de contrainte est influencée par la friction entre faces de la fissure.On calcule les facteurs d'intensité de contrainte correspondant à une tension dont l'axe est incliné par rapport à la fissure, ou à un cisaillement dans le plan, et on compare les valeurs obtenues à celles correspondant aux cas où l'on ignore la fermeture de la fissure et la friction entre ses faces.

     

Polyester polyurethane ionomers

The urethane elastomers based on 4,4′-diphenylmethane diisocyanate (MDI), oligo (ethylene adipate) (OEA) with different chain extenders, and dibromohexane or ammonium salt were synthesized. Their mechanical and thermal properties were studied by stress-strain analysis, thermomechanical methods, and differential thermal analysis. It was demonstrated that the incorporation of ionic groups in the structure of urethane elastomers due to the reaction of dibromohexane with a tertiary amine or urea NH group improves their tensile strength and thermal resistance.     

Uptake, retention, and repellency of a potential carrier of active ingredients in crack and crevice treatments for stored-grain beetles

Crack and crevice treatments are important in modern stored-beetle management, because: (1) pests are abundant in such microhabitats, (2) they potentially deliver insecticides to insect pests without contaminating food products, and (3) they can significantly reduce the need for broadcast spray applications and/or fumigations. As part of on-going research into the development of novel insecticide delivery systems to be used in processed and unprocessed food environments, we examined uptake and behavioural responses of Oryzaephilus surinamensis to an electrostatically chargeable powder, Entostat^TM. Entostat is a processed plant wax and has been identified as a potential carrier for active ingredients to be delivered to cracks and crevices in food facilities. Depending upon the initial Entostat concentration in rolled oats, 0.03–0.26 μg powder was extracted from individual beetles 72 h after being transferred from treated to untreated food. SEM images showed that Entostat adhered to all body parts, including joints, between body segments, and at the insertions of body hairs. Choice experiments showed that O. surinamensis individuals were repelled, when rolled oats in cracks contained >5% Entostat. In a three-choice experiment cracks contained: (1) untreated oats, (2) oats mixed with 5% (w/w) Entostat, or (3) oats mixed with 5% (w/w) Entostat and a piece of filter paper containing a beetle attractant which was also inserted into the crack. The beetle attractant did not significantly increase the attractiveness of the crack in which it was applied, but the average powder uptake of beetles from cracks treated with the attractant was significantly higher than from the other cracks. Results presented here suggested that Entostat adhering to insects was retained over several days and that considerable amounts of Entostat were taken up even when beetles were offered a choice between treated and untreated cracks.     

Questions for Freud: The secret history of psychoanalysis.

Review of book: Questions for Freud: The Secret History of Psychoanalysis. Cambridge, MA: Harvard University Press, 1997, xiv + 239 pp. Reviewed by Hannah S. Decker. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Polymer–Ferrocene Conjugates Containing an Ester Function in the Connecting Links

Ferrocene, the parent of the metallocene family of organotransition metal compounds, has come to occupy a significant niche in cancer research. Developmental work in the authors' laboratory has been focused on the synthesis of antiproliferative ferrocene conjugates in which the bioactive ferrocene unit is covalently, yet bioreversibly bound (anchored) to water-soluble carrier polymers designed in accordance with requisite biomedical specifications. The anchoring link in most of these conjugates has been an aliphatic spacer containing the biofissionable amide group. In this communication the synthesis of a class of ferrocene conjugates is reported in which the ferrocene group is carrier-anchored through spacers containing an ester link, of interest here because of potentially different drug release behavior. The carriers are polyamides equipped with variously spaced hydroxyl side groups, to which the ferrocenylation agent, 4-ferrocenylbutanoic acid, is connected through esterification. The coupling reactions, mediated by carbodiimide agent and catalyzed by 4-(dimethylamino)pyridine, are carried out in DMF at temperatures not exceeding 65°C, and the water-soluble product polymers are isolated in yields of typically 70–85% by precipitation, aqueous dialysis, and freeze-drying. With the molar feed ratios chosen in these coupling experiments, the incorporation of ferrocene, assessed by ¹H NMR spectroscopy, corresponds to iron contents of roughly 2.5–5.5%, by mass. The conjugates will be included in a forthcoming bioactivity screening program.     

Hybrid modeling of inulinase bio‐production process

BACKGROUND: A potential application of inulinase in the food industry is the production of fructooligosaccharides (FOS) through transfructosilation of sucrose. Besides their ability to increase the shelf‐life and flavor of many products, FOS have many interesting functional properties. The use of an industrial medium may represent a good, cost‐effective alternative to produce inulinase, since the activity of the enzyme produced may be improved or at least remain the same compared with that obtained using a synthetic medium. Thus, inulinase production for use in FOS synthesis is of considerable scientific and technological appeal, as is the development of a reliable mathematical model of the process. This paper describes a hybrid neural network approach to model inulinase production in a batch bioreactor using agroindustrial residues as substrate. The hybrid modeling makes use of a series artificial neural network to estimate the kinetic parameters of the process and the mass balance as constitutive equations. RESULTS: The proposed model was shown to be capable of describing the complex behavior of inulinase production employing agroindustrial residues as substrate, so that the mathematical framework developed is a useful tool for simulation of this process. CONCLUSION: The hybrid neural network model developed was shown to be an interesting alternative to estimate model parameters since complete elucidation of the phenomena and mechanisms involved in the fermentation is not required owing to the black‐box nature of the ANN used as parameter estimator. Copyright © 2010 Society of Chemical Industry     

Influence of the inorganic phase concentration and geometry on the viscoelastic properties of latex coatings through the glass-transition

The mechanical properties of artists’ acrylic (latex) paint films containing different volume fractions of TiO₂, CaCO₃ and kaolin were measured in uni-axial tension over a broad range of temperatures and crosshead speeds. Young’s modulus results in the glassy region were first compared with several micromechanics theories for particle-filled composites containing elastic phases. It was found that the Mori-Tanaka theory slightly under-predicted the modulus enhancement, while the Lielens approach provided the most accurate results. A nonlinear viscoelastic material model involving a Prony series and the neo-Hookean hyperelastic function was used to represent the tensile data up to relatively small strains of a few percent. From the experimental data, the material model was calibrated and the required parameters were determined. The derived parameters were then used to re-construct relaxation modulus plots, which were compared with the approximations given by Clements and Mas for the viscoelastic Mori-Tanaka theory in the time-domain. It was found that the experimentally observed modulus enhancement was much stronger than the predicted values in the rubbery region. Mechanisms such as constrained polymer at the inorganic particle interface, and the possible formation of a percolation network are discussed.     

A Rapid Size-Exclusion Solid-Phase Extraction Step for Enhanced Sensitivity in Multi-Allergen Determination in Dark Chocolate and Biscuits by Liquid Chromatography–Tandem Mass Spectrometry

Enhanced sensitivity for the simultaneous determination of five nut allergens in biscuit and in dark chocolate complex matrices was obtained by introduction of a rapid size-exclusion solid-phase extraction-based step before liquid chromatography–electrospray ionization-tandem mass spectrometry (LC-ESI-MS²) analysis. A very fast and efficient separation (<12 min) of marker peptides with selected reaction monitoring detection was obtained. Limits of detection in the 0.1–1.3 mg nut/kg and 5–15 mg nut/kg ranges for biscuit and dark chocolate samples as well as high recoveries (84(±6)–106(±4)% for biscuits and 98(±5)–108(±6)% for dark chocolate) proved the excellent capabilities of the exploited sample treatment method combined with the LC-MS² analysis. Good precision in terms of intra- and inter-day repeatability was calculated, being always lower than 19 % (n?=?75). Linearity was demonstrated up to four and three orders of magnitude for biscuit and dark chocolate, respectively. Finally, the validated method was successfully applied to the investigation of hidden nut trace allergens in commercially available biscuits and chocolates of different brands aiming to ascertain possible discrepancies between allergen content and food allergen labelling.